SureCall SC-FlareiQ Cell Phone Signal Booster User Guide
- May 15, 2024
- SureCall
Table of Contents
SureCall SC-FlareiQ Cell Phone Signal Booster
Specifications
- Antenna Type: Yagi
- Cable Type: RG-11
- App: SureCall Flare IQ
- Power Supply: Included
Product Usage Instructions
1. Setup Overview:
Set up the Yagi antenna, run the included RG-11 cable into your home, and place the Flare booster in a central location where improved signal is needed.
2. App Utilization:
Download the SureCall App from Google Play or Apple’s App Store. Use the app to assist with aiming the outside antenna properly and ensuring sufficient separation between the outside antenna and the inside booster/antenna.
3. Connection and Positioning:
Once the power supply is connected and the booster is plugged in, utilize the app to determine the best location and angle for your outside antenna based on real-time signal strength readings.
4. Outside Signal Strength:
Performance is heavily dependent on the outside signal strength. Mount the outside antenna where the signal is strongest to achieve optimal results.
5. Antenna Separation:
Place the booster centrally where the signal is required. Maintain a vertical distance of at least [vertical feet] and up to [horizontal feet] of horizontal distance. Check antenna isolation on the app to ensure adequate separation.
FAQs
- Q: How can I improve indoor coverage with the signal booster?
- A: Ensure the outside antenna is mounted where the signal is strongest, typically above the roof line facing your carrier’s nearest cell tower.
- Q: What should I do if my signal strength is poor?
- A: Try repositioning the outside antenna to a location with better signal strength to enhance indoor coverage.
- Q: How can I contact support for further assistance?
- A: You can reach out to SureCall support via email at support@surecall.com or by calling 1-888-365-6283.
BEFORE YOU BEGIN
Download the SureCall App in the Google Play or Apple’s App Store. Just search, “SureCall”
FLARE IQ APP
Use the app to help with two important aspects of any signal booster setup: Proper aiming of the outside antenna and ensuring adequate separation between the outside antenna and the inside booster/antenna
OVERVIEW
Set up the
- Yagi antenna, run the included
- RG-11 cable (50 ft) into your home and place the
- A flare booster in a central location improved signal is needed. Once the
- the power supply is connected and the booster is plugged in, use the app to identify the best location and angle for your outside antenna
IMPORTANT
OUTSIDE SIGNAL STRENGTH
Performance is LARGELY BASED ON your outside signal STRENGTH. If signal is weak where the outside antenna is installed, indoor coverage will be limited. Mounting the outside antenna where the signal is the strongest yields the best possible results. Generally, this is above the roof line, on the side of facing your carrier’s nearest cell tower. Using the Flare iQ mobile app to wirelessly connect to your booster, identify the best location and angle for your antenna by reading signal strength in real time.
ANTENNA SEPARATION
Place the booster in a central location where the signal is needed. Maintain a distance of at least 25 feet, up to 50 feet of horizontal distance, especially if vertical distance cannot be achieved. Check antenna isolation on the app. The results reflect whether you have achieved adequate separation between the booster and the antenna.
QUESTIONS?
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>