SureCall EZ Connect Single Band Consumer Booster User Guide
- June 5, 2024
- SureCall
Table of Contents
SureCall EZ Connect Single Band Consumer Booster
Introduction
In the Box
Remove Contents from packaging
- Receiving Unit
- Receiving Cable RG-174 (30’)
- Inside Antenna
- Inside Cable RG-174 Cable (10 ft)
- Power Injector
- Power Supply
System Requirements
Download the SureCall EZ Connect app for easy installation
Key Features
- Band 13
- DL Gain +10 dBm ERP / UL Gain +28 dBm EIRP
- IP66 Weatherproof booster can be mounted inside or outside; multiple mounting options
- Bluetooth connectivity with app that features signal meter to aid installation
- Remote monitoring via integrated NB-IoT module and SureCall Cloud
- Features Extended Range Technology (ERT) to maximize performance
Interface and LEDs
How it works
- The receiving unit is used to communicate with your Verizon tower. It is placed in the area of best signal and aimed toward the tower in order to pick up the strongest signal.
- The receiving unit also amplifies the received signal and sends it to the inside panel antenna.
- The inside panel antenna broadcasts the signal to your mobile devices and then back to the cell tower.
Before Installation
EZ Connect Assembly
Ensure adequate separation between the planned locations of the receiving unit
and inside antenna. Confirm signal from cell tower at outside location is
adequate
Create a soft installation placing the components in approximate locations –
with the receiving antenna in the location with best signal and indoor antenna
facing the area signal is needed. Assemble main components and add power.
Identify Optimal placement for EZ Connect
Scan and download the SureCall app to pair with your EZ Connect.
Use the app to see real time feedback to guide you to the best placement for
both components.
Receiving Unit
Identify window location facing your closest tower that receives the strongest
signal.
20’ separation is recommended when receiving unit is outside
30’ separation is recommended when receiving unit is placed inside
Panel Antenna
Place the indoor panel antenna where signal is needed and adequately distanced
from your Receiving unit.
At least 20 ft from the receiving unit if placed outside and at least 30 ft
from the receiving unit if placed inside
Installation
Mount Receiving Unit
Multiple mounting options are provided: Roof mount (recommended),wall mount and Window mount
Option 1: Roof Mount
Option 2: Wall Mount
Option 3: Window mount
Once you have determined the inside location with hh the strongest signal,
place the receiving unit in that location. 3M tape is provided for mounting
on window surface.
Mount inside antenna
Choose to set on a desktop or mount to a wall.
Receiving Unit
Indoor Panel Antenna
Refer to app to check for isolation issues
System Configuration
Recommendations for improving install
- Inside antenna should be 30’ (line of sight) Window-Mount / outside unit
- Confirm the inside antenna is pointing away from the Window-Mount / outside unit.
- If the Window-Mount / outside unit is installed inside, the inside antenna should be mounted in another room to allow for wall attenuation.
Troubleshooting
If the booster isn’t receiving enough power or isn’t working properly, the LED light on the power supply will be red instead of green
Product specifications
Name EZ Connect
Model: SC-EZ-Connect
Certifications: FCC (North America)
Regulatory Information
THIS IS A CONSUMER DEVICE
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have
your provider’s consent.
Most wireless providers consent to the use of signal boosters. Some providers
may not consent to the use of this device on their network. If you are unsure,
contact your provider.
You MUST operate this device with approved antennas and cables as specified by
the manufacturer. Antennas MUST be installed at least 20 cm (8 Inches) from
any person. You MUST cease operating this device immediately if requested by
the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate
for calls served by using this device.
This device may be operated ONLY in a fixed location for in-building use.
CLASS B EQUIPMENT: This equipment has been tested to, and found to be within
the acceptable limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a residential
environment.
This equipment generates radio frequency energy and is designed for use in
accordance with the manufacturer’s user manual.
However, there is no guarantee that interference will not occur in any
particular installation. If this equipment causes harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, you are encouraged to try to correct the interference by
one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/television technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
RF Exposure: This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 32 cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Warning： Unauthorized antennas cables and/or coupling devices are prohibited by FCC rules. Please contact FCC for details： 1-888-CALL-FCC
Antenna kitting:
| Component | Prod No. Description | Gain/Loss | Notes |
|---|
LTE-V
**Outdoor Antenna*| SC548-1W| 5dBi| **
Default Matching Antenna
Indoor Cable| Power box10Feet| 4dB
Indoor Antenna| SC548-2W| 5dBi
* All equivalent antennas and cables are suitable for use with the EZ
Connect booster.
Documents / Resources
|
SureCall EZ Connect Single Band Consumer
Booster
[pdf] User Guide
EZCONNECT, RSN-EZCONNECT, RSNEZCONNECT, EZ Connect, Single Band Consumer
Booster, EZ Connect Single Band Consumer Booster
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>