Arenti DOME 1 Smart Indoor Pan Tilt Wi-Fi Camera User Guide

June 6, 2024
Arenti

DOME 1
**QUICK GUIDE
Smart Indoor Pan Tilt Wi-Fi Camera

**

Compatible with Amazon Alexa & Google Assistant

Quick start guide

  1. Packing list
  2. Product description
  3. Device configuration
  4. Legal notice

Packing list

Product description

Notice

To reset the device, press and hold the reset button for 5 seconds. The camera beeps when the operation is complete.

Flashing red light (slow) Waiting configuration
Flashing red light (fast) Searching WiFi network
Fixed blue light Camera connected to WiFi
Flashing blue light Access point mode

Camera configuration

Step 1 Turn on your camera by plugging in the power adapter.
Step 2 Connect your smartphone to the Wi-Fi network.
Step 3 Download Arenti app from the App Store or Google Play depending on your device.
Step 4 Launch Arenti app and sign up for the first use.
Step 5 Follow the steps below to add your camera, then follow the on- screen instructions.

https://www.arenti.com/blogs/help_center

Note

  • If you have multiple cameras, please follow step 5 again to add devices one by one.
  • To change Wi-Fi network, please restore the camera to factory settings and follow step 5 to add the camera.

Specifications

Sensor type 1/3″ CMOS
Min. brightness Color 0.1 Lux@F2.0
Black and white 0.01Lux@F2.0
Resolution 3 Mega pixels
Lens 3.6 mm F2.0
Shutter 1/15-1/10,000 per second
Infrared High power LED with ICR
Infrared distance 10 meters
Pan/Tilt 0°∼350°/-20°∼90°
Video compression H.264
Bit rate 32Kbps – 2Mbps
Max resolution 2304 x 1296
Framerate 1-25 per second
Picture settings Support HD/SD; support flip
Storage SD card (Max 256GB)
Audio Two-way audio
Protocols HTTP, DHCP, DNS, RTSP
WiFi standard IEEE802.11b/g/n
Frequency 2.4 GHz – 2.4835 GHz
Bandwidth 20/40MHz
WiFi encryption WPA-PSK/WPA2-PSK
Security AES128
Working temperature -20°C∼50°C
Power DC5V,1A
Consumption 4.5W MAX
Size(mm) 59x70x102
Model TPA-67F050100VUO1
--- ---
Input voltage 100-240Vac
Input frequency 50-60Hz
Output voltage +5Vdc
Output current 1A
Output power 5W
Efficiency 73,62%
No-load consumption <0.1W

Support
www.arenti.com
Symbols
****Direct current (DC)
Don’t throw batteries or out of order products with the household waste (garbage). The dangerous substances that they are likely to include may harm health or the environment. Make your retailer take back these products or use the selective collect of garbage proposed by your city.
Hereby, Arenti, declares that the radio equipment type ‘DOME1’ is in compliance with the
Directive 2014/53/EU.
The full test of the EU declaration of conformity is available at the following Internet address: http:// www.arenti.com
For indoor use only

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and consider removing the no-collocation statement.
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
V1.3 202108
© 2021 Arenti. All rights reserved. All trade names are registered trademarks of respective companies Apple, the Apple logo, iPhone are trademarks of Apple Inc. registered in
the U.S. and other countries. Google, the Google logo, Android are trademarks of Google Inc. App Store is a service mark of Apple Inc. Google Play is a service mark of Google Inc.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals