Arenti OUTDOOR1 Outdoor 2K WiFi Security Camera User Guide
- June 5, 2024
- Arenti
Table of Contents
OUTDOOR1
QUICK GUIDE
Outdoor Wi-Fi Camera
Compatible with Amazon Alexa & Google Assistant
Quick start guide
- Packing list
- Product description
- Installation
- Product configuration
- Legal notice
1. Packing list
Camera X1 Power adaptor X1 Scew package X1
Quick guide X1 Warning sticker X2
2. Product description
- SD card slot
- Reset
- Speaker
- LED indicator
- Microphone
- IR light & warm light
Notice
To reset the device, press and hold the reset button for 5s.
The camera beeps when the operation is complete.
LED indicator of camera:
| Flashing red light (slow) | Wait for network config |
|---|---|
| Flashing red light (fast) | Connecting the network |
| Fixed red light | Network is malfunctional |
| Fixed blue light | Camera is working correctly |
3. Installation
Install the camera with the included screws.
4. Product configuration
Step 1 Turn on your camera.
Step 2 Connect your smartphone to the Wi-Fi network.
Step 3 Download Arenti app from the App Store or Google Play depending on
your device.
Step 4 Launch the App and sign up for the first use.
Step 5 Follow the on-screen instructions to add your camera.
Notice
If you have multiple cameras, please follow step 5 again to add devices one by
one.
To change Wi-Fi network, please restore the camera to factory settings and
follow step 5 to add the camera.
Specifications
| Sensor type | 1/3″ CMOS |
|---|---|
| Min. brightness | Color [email protected] |
| Black and white [email protected] | |
| Resolution | 4 Mega pixels |
| Lens | 2.8 mm F1.6 |
| Shutter | 1/20-1/10,000 per second |
| Infrared | High power LED with ICR |
| Infrared distance | 10 meters |
| Video compression | H.265 |
| Bit rate | 32Kbps – 2Mbps |
| Max resolution | 2560 x 1440 |
| Framerate | 1-20 per second |
| Picture settings | Support HD/SD; support flip |
| Storage | SD card (Max 256GB) |
| Audio | Two-way audio |
| Protocols | HTTP, DHCP, DNS, RTSP |
| WiFi standard | IEEE802.11b/g/n/ac |
| Frequency | 2.4 GHz & 5 GHz |
| WiFi encryption | WPA-PSK/WPA2-PSK |
| Security | AES128 |
| Working temperature | -20℃~50℃ |
| Power | DC12V,1A |
| Consumption | 5.5W MAX |
| Size(mm) | 146 x 65 x 65 |
| Efficiency | 73.62% |
| No-load consumption | < 0.1W |
5. Legal notice
Support
www.arenti.com
Symbols
Direct current (DC)
Don’t throw batteries or out of order products with the household waste (garbage). The dangerous substances that they are likely to include may harm health or the environment. Make your retailer take back these products or use the selective collect of garbage proposed by your city.
Hereby, Arenti, declares that the radio equipment type `OUTDOOR1′ is in
compliance with the Directive 2014/53/EU
The full test of the EU declaration of conformity is available at the
following Internet address: www.arenti.com
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provide with antenna
installation instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
V1.1 202204
© 2022 Arenti. All rights reserved. All trade names are registered trademarks of respective companies Apple, the Apple logo, iPhone are trademarks of Apple Inc. registered in the U.S. and other countries. Google, the Google logo, Android are trademarks of Google Inc. App Store is a service mark of Apple Inc. Google Play is a service mark of Google Inc.