Arenti INANNY 2K or 3MP Ultra HD AI Powered Baby Monitor with Screen User Manual
- June 4, 2024
- Arenti
Table of Contents
AINANNY
with Monitor
USER MANUAL
Compatible with
Amazon Alexa & Google Assistant
Quick start guide
- Packing list
- Product Description
- Installation
- Connection of camera and App
- The pairing of the camera and monitor
- Usage
- FAQ
Packing list
| Camera X1
---|---
| Power adaptor X2
| USB cable X2
| Reset pin X1
| Monitor X1
| Bracket X1
| Headgear X1
| uick guide X1
| Warning sticker X2
| Screws X3
Product description
Status light
Blinking red light: wait for network connection (slow) connecting the network
(fast)
A solid blue light on: the camera is working correctly Solid red light on: the
camera is malfunctioning Call/Pairing Press to make a call; long press to pair
Reset Press and hold for 5 seconds to reset the camera (if you have modified
settings, they will return to factory defaults)
| Status light | Orange light: Charging |
|---|---|
| of charging | Greenlight: Fully charged |
| Status light | Yellow light: The monitor is on |
| of using | No light: The monitor is off |
| Antenna | Adjust the angle to get better signals |
ON/OFF button Long press 5s to turn on and turn off the monitor
Zoom in/out| Zoom the image in 1X, 2X or 4X
Menu| On the homepage, press to enter the menu interface;
Direction| On the homepage, long press to enter the setting interface
OK| Control the rotation directions; select the menu items
Call| Press to back up;
Back| On the homepage, long press to stop playing music
Installation
-
Install the camera on a flat surface.
-
Use the included mounting bracket to fix the camera to a clean surface.
Connection of camera and App
Connect the camera to the App
The camera can be connected both to the monitor and the App. Generally, it is
connected to the monitor by default.
Follow the steps below to connect the camera to the App:
-
Make sure the Wi-Fi network is a 2.4 GHz network, as the camera doesn’t support 5 GHz Wi-Fi.
-
Download the corresponding App on your phone. Register a new account to log in or log in directly.
-
Reset the camera using a pin until the status light is red in fast blinking.
(You have to connect the camera to the App within 2 minutes; otherwise, you have to reset the camera again.)
(If you are using the monitor, the audio and video will be temporarily disconnected, and will automatically resume after the camera is successfully configured with the network. The maximum time is 2 minutes.） -
Follow the step instructions on your smartphone to add the monitor, and scan the QR code with your camera.
App Download
The App is available for both iOS and Android OS. Scan the QR code or search
“Arenti” at App Store and Google Play. Download and install the App at your
phone. You can select the App according to your needs.·
Support
Set up router
The router supports 2.4GHz WiFi (doesn’t support the 5GHz), and is connected
to the WiFi network.Please set the parameters of the router before connecting
the WiFi network, and record the SSID and password of your WiFi.
Pairing of camera and monitor
Power on the camera and the monitor, and they will automatically connect. If
the connection fails, please follow the steps below to pair. The pairing is
distance limited, so make the distance between the camera and the monitor is
no more than 200m.
Unbind the monitor and camera:
- Press the Menu button on the monitor screen, and select > Camera.
- Select Camera 1 or Camera 2 which you need to unbind.
- Long press OK button to release the binding.
Pair the monitor and camera:
- Press the Menu button on the monitor screen, and select > Camera.
- Select Camera 1 or Camera 2 which you need to pair.
- Long press the camera pairing button until you hear the prompt tone.
- Press OK button on the monitor screen to start pairing.
- For 2 cameras, repeat step 2 ~ step 4.
Usage
Note：
If you have addded 2 cameras, the monitor screen will display 2 live views at
the same time. If you want to set parameters or enable functions of one of the
cameras, you need to select the camera first.
The method of camera selection is as follows:
Press the back key on the home page to enter the switch camera mode and the
camera icon will flash. Press the left and right buttons to switch the camera
to be controlled.
Rotate the camera
You can adjust the monitoring angle for a better vision.
The direction buttons on the monitor screen are available when the camera is
powered on. Press direction buttons to rotate the camera horizontally and
vertically, for better vision.
Photo & video
-
Take a photo:
You can take a photo when you want to capture an interesting scene of a baby.
Press Menu button on the monitor screen, select, and press OK to take a photo. -
Record a video:
You can record a video when you want to capture a meaningful time of the baby.
Press Menu button on the monitor screen, select, and press OK to record a video. -
View the taken photos and recorded videos:
1. Press Menu button on the monitor screen, select and press OK to enter the interface.
2. Select the camera and date, select the photo or video you want to view and press OK to enter preview mode. -
For a video, press OK to play or pause in the preview mode.
-
Press the backup button to quit preview or return to the main menu.
Play Music
You can play music to soothe your baby when the baby is crying or sleeping.
There is various soft music to select.
Press Menu button on the monitor screen, select, and press OK to enter the
music interface. You can select different music, change the music cycle mode,
or adjust the music volume.
Feeding reminder
Remind yourself to feed your baby, when you are too busy, or when you want to
give your baby a regular diet.
-
Press the Menu button on the monitor screen, and select > Feeding Reminder.
-
Press UP and DOWN direction buttons to select between 4-time options, and press OK to start the time setting.
-
When start to set up one feeding time, press LEFT and RIGHT direction buttons to change options between hour, minute, second, and on/off; and press UP and
DOWN direction buttons to change values and select on or off. -
Press OK to save settings.
-
Select on or off to open or close feeding reminders. You can set up to 4 feeding times one day. And when the set time is up, a feeding alarm will appear on the monitor screen.
Smart care
You can turn on functions of motion detection, noise detection, and cry
detection so that you can know the baby’s status immediately, no matter
whether you are sleeping, working, cooking, and so on.
- Press Menu button on the monitor screen, and select > SmartCare.
- Press UP and DOWN direction buttons to select options between motion detection, noise detection, cry detection, and alarm volume, and press OK to save.
- When starting to set up one detection mode, press the LEFT and RIGHT direction buttons to change options, and press the UP and DOWN direction buttons to adjust the sensitivity.
- You can select different sensitivity according to needs. Low is low sensitivity, and high is high sensitivity. 4. When set up the alarm volume, press the LEFT and RIGHT direction buttons to adjust. 5. Press OK to save settings. 6. There will be an alarm when the set detection is triggered, press OK to stop the alarm.
Temperature and humidity detection
You can real-time monitor the temperature and humidity of your baby’s room.
When the temperature and humidity are out of range, you can get the alarms
immediately, and then take measures.
- Press the Menu button on the monitor screen, and select > Temperature and humidity.
- Press UP and DOWN direction buttons to select options between temperature range, humidity range, and out-of-range reminder, and press OK to startsetting.
- Press LEFT and RIGHT direction buttons to change options, and press UP and DOWN direction buttons to change values and units.
- Press OK to save settings.
- In Out of range reminder option, select to turn on or off the alarm when the temperature and humidity are out of range.
Safety Protection
You can turn on or turn off the Wi-Fi network channel so that others cannot
live view the videos by App if the function is off. And you can also view the
visited records as all visits through the App will be recorded.
Night light
You can turn on the night light if needed, and you can set lighting mode and
light color.
Press Menu button on the monitor screen, and select Or press Menu button, and
select > Light > Night light to enter the setting interface.
General setting
-
Set up brightness:
1. Press Menu button on the monitor screen, select and press OK to enter the interface.
2. Press UP and DOWN direction buttons to adjust brightness. -
Set up time:
1. Press Menu button on the monitor screen, and select > Time setting.
2. Press direction buttons to change the date, time and time displaying mode. -
Set up language:
1. Press Menu button on the monitor screen, and select >Language.
2. Select the language you need. -
Set up sleep mode:
You can set up sleep mode to increase standby time.
1. Press Menu button on the monitor screen and select > Sleep mode.
2. Select sleep mode as 1 minute, 5 minutes, 10 minutes, 30 minutes, 60 minutes or off.. -
Turn on and off status indicator:
If you turn on the status indicator, you can get the working status of the camera. You can also turn off the status indicator if you think it will affect your baby’s sleep.
Press the Menu button on the monitor screen and select > (Or Press Menu button select > Light > Status light.) -
SD card:
1. Press the Menu button on the monitor screen, and select > SD card management. Then you can view the total capacity and remaining capacity of your SD card.
2. (Optional) You can format the SD card as you needed, but make sure that the important data is backed up. -
Upgrade:
Make sure your camera is connected to a the 2.4 GHz Wi-Fi.
You can upgrade your camera when the upgraded alarm appears. Or Press the Menu button on the monitor screen, and select > Device information to check whether there is an upgrade. -
Low battery alarm:
When the camera is low on battery, the low battery alarm will appear on the monitor screen. Please charge the monitor as soon as possible.
FAQ
Q: The monitor cannot be previewed properly?
A: Check whether the monitor has connected to the camera. If not, pair the
camera and the monitor firstly.
Q: Cannot find the pairing button?
A: The pairing button is the call button of the camera. Long press the button
for 3 seconds, and follow the step instructions of the monitor. (To enter the
pairing interface of the monitor, press Menu button on the monitor screen,
and select > Camera Management.)
Q: What if the monitor screen is stuck and it doesn’t work while pressing any
buttons?
A: Press the reset button of your monitor with the pin, and then long press
the power button of your monitor to restart it.
Q: Why the camera or the monitor cannot identify the SD card?
A: Confirm whether the SD card is normal and the format is FAT32.
Q: Why I can’t get the notifications with my cell phone App when I connect the
camera to the monitor?
A: Please confirm that the App has been running on the phone, and the relevant
reminder function has been opened; Message notification and authority
confirmation in the mobile phone system has been opened.
Q: Why the monitor can’t view video after the camera is connected to the App?
A: The monitor has a 2-minute interruption time when the camera is reset, and
it will automatically resume after 2 minutes. If it doesn’t recover, try to
pair the monitor and camera again.
Functions
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and sed in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provided with antenna
installation instructions and consider removing the collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution! Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>