Arenti BULLET9T IP Camera User Guide
- June 5, 2024
- Arenti
Table of Contents
OUTDOOR1
IP CAMERA
Compatible with Amazon Alexa & Google Assistant
Packing list
Product description
- SD card slot
- Reset
- Speaker
- LED indicator
- Microphone
- IR light & warm light
Notice
To reset the device, press and hold the reset button for 5s.
The camera beeps when the operation is complete.
LED indicator of the camera:
| Flashing red light (slow) | Wait for network config |
|---|---|
| Flashing red light (fast) | Connecting the network |
| Fixed red light | Network is malfunctional |
| Fixed blue light | The camera is working correctly |
Installation
Install the camera with the included screws.
Product configuration
Step 1 Turn on your camera.
Step 2 Connect your smartphone to the Wi-Fi network.
Step 3 Download the Arenti app from the App Store or Google Play
depending on your device.
Step 4 Launch the App and sign up for the first use.
Step 5 Follow the on-screen instructions to add your camera.
https://www.arenti.com/blogs/help_center
Notice
If you have multiple cameras, please follow step 5 again to add devices one by
one.
To change the Wi-Fi network, please restore the camera to factory settings and
follow step 5 to add the camera.
Specifications
| Sensor type | 1/3′ CMOS |
|---|---|
| Min. brightness | Color 0.01Lux@F1.6 |
| Black and white 0.01Lux@F1.6 | |
| Resolution | 4 Megapixels |
| Lens | 2.8 mm F1.6 |
| Shutter | 1/20-1/10,000 per second |
| Infrared | High power LED with ICR |
| Infrared distance | 10 meters |
| Video compression | H.265 |
| Bit rate | 32Kbps – 2Mbps |
| Max resolution | 2560 x 1440 |
| Framerate | 1-20 per second |
| Picture settings | Support HD/SD; support flip |
| Storage | SD card (Max 128G8) |
| Audio | Two-way audio |
| Protocols | HTTP, DHCP, DNS, RTSP |
| WiFi standard | IEEE802.11a/b/g/n |
| Frequency | 2.4 GHz & S GHz |
| WiFi encryption | WPA-PSK/WPA2-PSK |
| Security | AES128 |
| Working temperature | -20°C-50°C |
| Power | DC12V,1A |
| Consumption | 5.5W MAX |
| Size(mm) | 146 x 65 x 65 |
| Efficiency | 73.62% |
| No-load consumption | < 0.1W |
Legal notice
Support
www.arenti.com
Symbols
**** Direct current (DC)
Don’t throw batteries or out-of-order products with household waste (garbage). The dangerous substances that they are likely to include may harm health or the environment. Make your retailer take back these products or use the selective collection of garbage proposed by your city.
Hereby, Arenti declares that the radio equipment type ‘OUTDOOR1′ is in
compliance with the Directive 2014/53/EU
The full test of the EU declaration of conformity is available at the
following Internet address: www.arenti.com
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provided with antenna
installation instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
© 2021 Anti. All rights reserved. All trade names are registered trademarks of
respective companies Apple, the Apple logo, and iPhone is trademarks of Apple
Inc. registered in
the U.S. and other countries. Google, the Google logo, and Android are
trademarks of Google Inc. App Store is a service mark of Apple Inc. Google
Play is a service mark of Google Inc.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>