ATEN CCKM KE Matrix Management Software User Guide

ATEN CCKM KE Matrix Management Software

Download icense Activation

Adding KE Series Devices

Installation

To install the CCKM, do the following:

1. On ATEN website’s Download section, search for CCKM and click Download the latest version. Then log in (by Create New or Log In).

2. Click Insert under Product Registration to register the KE Series device(s) you have purchased. A

3. After registration, click Trial Software Download A , download and unzip the version of the CCKM software based on your OS system.

4. Insert the CCKM USB License Key purchased. If you’re using the Virtual License, skip this step, and see License Activation after the installation is complete.

5. Execute the *.exe installation fi le and follow the onscreen instructions to install.
   Note: In the License Agreement screen, thoroughly read through the details of the software license agreement before proceeding.

6. When the installation is complete, the Installation Complete message appears.

7. Run the CCKM.

License Activation

Without a license, the CCKM can only confi gure up to 8 KE Series devices. To activate the CCKM Virtual License Key, do the following:

1. Log into the CCKM web interface (https://:8443), and click System Settings.
2. From the General tab, click Click to Upgrade to browse for and activate your purchased license. B
3. Once upgraded, you can confi gure more than 8 KE Series devices to be managed by the CCKM over a network.

Adding KE Series Devices

Make sure the KE Series devices to be managed are within the same LAN, and you can add them to the CCKM by doing the following:

1. On the CCKM main page, click the Install Wizard button. C

2. Select Search Local or Search Subnet and enter a subnet IP, to respectively search for KE Transmitters / Receivers on the local network or for their subnet. Click the Refresh button to start searching. C

3. Under the total numbers of transmitters and receivers found, check the devices you want to add, and click Next.

4. Optionally reassign the IP addresses of the KE Series devices and/or rename them, then click Next.

5. Confi rm the settings and access permissions of the transmitters, and likewise for receivers, then click Done.
   Note: For details on Transmitter/Receiver Permissions, please refer to the KE Series & CCKM User Manual.

6. Once successfully added, you will be able to view and monitor the statuses of the KE Series devices on the CCKM main page.

Package Contents

• 1 CCKM USB License Key (inapplicable to Virtual License) user instructions

Support and Documentation Notice

All information, documentation, fi rmware, software utilities, and specifi cations contained in this package are subject to change without prior notifi cation by the manufacturer.
To reduce the environmental impact of our products, ATEN documentation and software can be found online at http://www.aten.com/download/

Technical Suppor

www.aten.com/support

References

• ATEN - Simply Better Connections | ATEN U.S.A.
• Downloads | ATEN Corporate Headquarters

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>