Arlux Birdy Smart Recessed Spotlight Instruction Manual
- June 13, 2024
- Arlux
Table of Contents
Arlux Birdy Smart Recessed Spotlight
Product Information
- Product Name: BIRDY
- Languages: FR, EN, DE, IT, ES, PL
- Model Numbers: 3297027316048, 3297027316055, 3297027316062, 3297027316079
- Power: 5W
- Brightness: > 80 lumens
- Protection Rating: IP20
- Input Voltage: 230V (220-240V)
- Dimensions: 10×11.3 cm
Product Usage Instructions
- Ensure that the input voltage matches the specified range of 220-240V.
- Place the BIRDY in a suitable location.
- Connect the BIRDY to a power source using the provided power cord.
- Turn on the power source and switch on the BIRDY.
- Adjust the brightness of the BIRDY as desired.
- To ensure safety, do not expose the BIRDY to water or other liquids.
- Keep the BIRDY away from flammable materials.
- If you encounter any issues or have questions, refer to the user manual in your preferred language for further assistance.
Note: Always follow the safety guidelines provided in the user manual to ensure proper and safe usage of the product.
DIMENSIONS
SYMBOLS
- Electrical products must not be thrown out with domestic waste. They must be taken to a communal collecting point for environmentally friendly disposal in accordance with local egulations. Contact your local authorities or stockist for advice on recycling.
- Product conforms to European Union Directives
- For indoor use only
- Live: brown wire
- Earth: green/yellow wire
- Neutral: blue wire
- User replaceable light source
General safety instructions
- The product must be installed by an electrician or any other qualified person and in accordance with the standards in force in the country of installation. To proceed with the installation or any maintenance or servicing work, disconnect the electrical supply.
- Do not look directly at the light source.
- Never touch the product when it is in operation, or when it has just been switched off.
- Do not use a damaged or modified power cord to avoid any risk of fire or electric shock.
- Before use, make sure that the product has not been damaged. If deterioration is observed, do not use the product.
- This product can be covered with a rigid or semi-rigid insulating material such as glass wool or rock wool with a thermal resistivity coefficient of 0.04W/m.K. Not suitable for blow-in insulation cellulose wadding).
- The flexible exterior cable or cord of this fixture cannot be replaced. If the cable is damaged, the luminaire must be recycled.
- Ensure that the fixed supply cable of the luminaire has additional insulation before the luminaire can be connected.
- Guarantee from the date of purchase against manufacturing defects, breakdowns and malfunctions of the product subject to proper installation according to the installation rules in force and subject to use in accordance with the information in this manual. ‘use.
- This warranty does not cover defects and damage caused by improper use
- During the Warranty period, with proof of purchase of the item, contact the point of sale which will replace or refund the product concerned.
POWER
INSTALLATION INSTRUCTIONS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>