ATEN VB905 4K DisplayPort Booster User Guide
- May 15, 2024
- Aten
Table of Contents
ATEN VB905 4K DisplayPort Booster
Package Contents
- 1 VB905 4K DisplayPort Booster
- 1 Power Adapter
- 1 User Instructions
Support and Documentation Notice
All information, documentation, firmware, software utilities, and
specifications contained in this package are subject to change without prior
notification by the manufacturer. To reduce the environmental impact of our
products, ATEN documentation and software can be found online at
http://www.aten.com/download/
Technical Support
Copyright 2023 ATEN® International Co. Ltd. ATEN and the ATEN logo are registered trademarks of ATEN International Co., Ltd. All rights reserved. All other trademarks are the property of their respective owners.
Scan for more information
Hardware Review
- DisplayPort In Port
- Power Jack
- Power LED
- DisplayPort Out Port
Hardware Installation
Refer to the installation diagram above and do the following.
- Use a DisplayPort cable to connect the unit’s DisplayPort In Port to a computer.
- Use a DisplayPort cable to connect the unit’s DisplayPort Out Port to a display device.
- The unit is powered by a connected computer. Depending on the output quality, you may need to connect the unit to the supplied power adapter. The power source is indicated by the color of the Power LED:
Power LED/Description
- Orange The unit is powered by a connected computer.
- Green The unit is powered by a power adapter.
Note:
- This setup can transmit 4K signals up to 10 m. To extend the transmission up to 15 m or 20 m, cascade another one or two VB905 units to this setup and connect each VB905 to the supplied power adapter.
- Make sure each DisplayPort cable used in this setup is not longer than 5 m.
Rack Mounting
Optionally purchase a Rack Mount Kit (ATEN KC06-0039-100G) for this setup.
- Place the brackets into position on the back of the VB905.
- Use the supplied screws to secure the brackets to the back of the VB905.
Specifications
- Model: VB905
- Resolution: 4K
- Ports: DisplayPort In, DisplayPort Out
- Power: Powered by a connected computer or power adapter
FAQ
Q: How do I know if the unit is powered by the computer or the power
adapter?
A: The power source is indicated by the color of the Power LED. Orange
indicates power from a connected computer, while green indicates power from a
power adapter.
Q: Can I purchase additional accessories for this product?
A: Yes, you can purchase a Rack Mount Kit (ATEN KC06-0039-100G) for rack
mounting purposes.