unitech SP320 Bluetooth Mobile Printer User Guide
- June 9, 2024
- unitech
Table of Contents
unitech SP320 Bluetooth Mobile Printer
Package Content
Standard Accessories
The pictures are for reference only. If any item is damaged or missing, please
contact the supplier.
For Belt buckle installation, please visit http://www.ute.com/lo view SP320
User’s Manual.
Appearance and Components
FrontView
Preparation before Using
Battery Installation
The battery is not installed in the printer before the product leaves factory.
- Remove the protective film of battery contacts.
- Install the battery as shown in the figure above.
- Fasten the battery
Printing Paper Roll Installation
- Press the cover opening button to open the paper bin cover.
- Load paper roll into the paper bin according to the direction as shown in the figure.
- Pull out a part of paper roll and close the paper bin cover.
- Tear off the excessive paper according to the direction as shown in the figure.
NOTE:
- Paper specification used by the printer: Paper width:80mm (One side can be adjusted) paper roll diameter: 50mm.
- Pay attention to the direction of paper roll.If it is placed in the wrong direction,will lead to blank printing.
- Be sure to pull a part of paper out of the paper bin.
Battery Charging
Plug the charger plug into the power socket, and the charger DC plug into the
printer charging port.(AC:100V-240V(50/60Hz))
WARNING If you use a power adapter not provided or approved by us, the
printer may be damaged.
ATTENTION Do not remove the battery while charging.
NOTE You can print while charging.
Basic Functions
Basic Functions
- Power On: press and hold the POWER button for 3 seconds.
- Power Off: When the printer is on, press and hold the POWER button.
- FEED: Press the FEED button (under continuous feeding mode, press FEED button to feed paper of about 5mm; under label/black label mode, press FEED button to feed paper to seam label or black label.)
Auto sleep/wake:
When the printer is turned on and has no button operation or data transmission
within 10 seconds, it will automatically enter sleep mode.
Press POWER button to wake up the printer (the printer will automatically wake
up when data is received).
Setting
Enter setting screen: During power-on state (non-sleep mode),
- press and hold SET button to enter the option screen.
- Press SET button: Go to the next option.
- Press FEED button: Change option parameters.
- Press POWER button: Confirm settings and exit.
Printer Parameters
Repair and Maintenance
Daily Maintenance of Printer
- Cleaning of outside and paper bin: Wipe the surface of the printer and the inside of the paper bin gently with a wrung-out wet cloth. Make sure that the wet cloth is completely wrung out.
- Cleaning of printer mechanism: The printer mechanism must be cleaned regularly, especially when the print quality declines. The cleaning method is as follows: Use absorbent cotton moistened with anhydrous alcohol to gently wipe the area marked with a gray box until it is clean.
- If water is found inside the printer, turn it off immediately, remove the battery, and dry the printer by airing.
- If the printer will not be used for a long time, remove the battery and store it separately.
Use and Storage of Printing Paper
- Please keep newly purchased printing paper in intact package and prevent it from direct sunlight and high temperature.
- Please keep printed documents in a dark place at room temperature (about 20°C), so as to effectively extend the storage life of the documents.
- If the documents need to be kept for a long time, please use long- lasting thermal printing paper.
Troubleshooting
Battery Recycling
This product uses a rechargeable lithium battery. To protect the environment, please do not dispose of used batteries at will. Need to send used batteries to the designated recycling box.
FCC WARNING
Any changes expressly or modifications not approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)This device may not cause harmful interference, and (2)This device must
accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the printer will not be used for a long time, remove the battery and store it separately If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radiofTV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment .
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
References
- Unitech Electronics
- Unitech Electronics
- 精瑞电脑 unitech
- Unitech Europe (EMEA) | Your Brilliant AIDC Solution Provider
- Unitech Global | Your Brilliant AIDC Solution Provider
- Unitech Global | Your Brilliant AIDC Solution Provider
- Unitech Global | Your Brilliant AIDC Solution Provider
- Unitech Global | Your Brilliant AIDC Solution Provider
- Unitech Global | Your Brilliant AIDC Solution Provider
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>