ATEN VB800 True 4k HDMI Booster User Guide

ATEN VB800 True 4k HDMI Booster

Product Information

Specifications:

• Part No.: PAPE-1223-I10G
• Released: 06/2023
• Supports True 4K resolution
• Can be cascaded up to 10 levels for long-distance 4K transmissions
• Front View: 1 HDMI In, 2 Power Jack
• Rearview: 3 power LEDs, 4 HDMI outs

Product Usage Instructions

Hardware installation

1. Use an HDMI cable to connect the HDMI source device port to the Video input port on the VB800.
2. Use an HDMI cable to connect an HDMI display to the Video Output port on the VB800.
3. Plug the power adapter into a DC power source, and then plug the power adapter cable into the Power Jack. (If using a single VB800, it can be powered from the source device directly).

Note:
It is recommended to use the power adapter to avoid degraded performance.

Rack mounting

1. Place the brackets onto the back of the VB800.
2. Secure the brackets to the back of the VB800 using screws.

Cascading
The VB800 can be cascaded up to 10 levels for long-distance 4K transmissions. Every third unit in a cascade needs to be connected to a power adapter.

FAQ:

• Q: Can a single VB800 be powered without using the power adapter?
  A: Yes, a single VB800 can be powered from the source device directly without the need for a power adapter.

• Q: How many levels can the VB800 be cascaded for long-distance transmissions?
  A: The VB800 can be cascaded up to 10 levels for long-distance 4K transmissions.

Package Contents

• 1 VB800 True 4k HDMI Booster
• 1 Power Adapter
• 1 Rack Mount Kit
• 1 User Instructions

Support and Documentation Notice

• All information, documentation, firmware, software utilities, and specifications contained in this package are subject to change without prior notification by the manufacturer.
• To reduce the environmental impact of our products, ATEN documentation and software can be found online at http://www.aten.com/download/.

Technical Support
www.aten.com/support.

Scan for more information

Product Page

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Hardware Review

Front View

1. HDMI In

2. Power Jack
   Rear View

3. Power LED

4. HDMI Out

Hardware Installation

1. Use an HDMI cable to connect the HDMI source device port to the Video input port on the VB800.
2. Use a HDMI cable to connect a HDMI display to the Video Output port on the VB800.
3. Plug the power adapter that came with the VB800 into a DC power source, and then plug the power adapter cable into the Power Jack.
   • (If using a single VB800 the power adapter is not necessary, a single VB800 can be powered from the source device.)

Once the hardware installation is complete, the display is ready for use.

Note
It is recommended to use the power adapter to rule out degraded performance.

Cascade
The VB800 can be cascaded up to 10 levels to make long-distance 4k transmissions. Every third unit in a cascade needs to be connected to a power adapter.

Rack Mounting

The VB800 comes with a rack mount kit. To attach the VB800 to the rack please follow these steps:

1. Place the brackets into position on the back of the VB800.
2. Use the screws to screw the brackets to the back of the VB800.

© Copyright 2023 ATEN® International Co. Ltd.
ATEN and the ATEN logo are registered trademarks of ATEN International Co., Ltd. All rights reserved. All other trademarks are the property of their respective owners.

References

• Downloads | ATEN Corporate Headquarters

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>