tunuo Rectangular Frameless LED Mirror Installation Guide

June 4, 2024
tunuo

tunuo Rectangular Frameless LED Mirror

tunuo Rectangular Frameless LED Mirror product-img

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical furnishing, basic precautions should always be followed , including the following:

WARNING:

  • To reduce the risk of burns,fire,electric shock or injury to persons.
  • Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer. Never drop or insert any object into any opening.Do not use outdoors.
  • Risk of electric shock.Connect this furnishing to a properly grounded circuit only. See grounding instructions.

ELECTRIC CONNECTIONS

ALL WIRING SHOULD BE DONE BY A QUALIFIED LICENCED ELECTRICIAN.

WARNING:

Shut off power before wiring. Requires 120 VAC 20 Amp GFI protected Circuit.

GROUNDING INSTRUCTIONS

CAUTION:

This product must be connected to a grounded metal permanent wiring system  or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment grounding terminal or lead on the product.

W ARNING:

An Electrical option mirror must be wired to a 20 Amp GFI(Ground Fault Interrupter) protected circuit when used in bathrooms and all other locations required by the National Electric Code.

HOW TO CONNECTIONS

If there is a suitable socket on the wall, plug in the mirror’s own plug and you can use the electric functions.
If a cord is reserved on the wall behind the hanging mirror, please cut off the plug of the wire on the mirror and connect them according to steps A and B.tunuo Rectangular Frameless LED Mirror fig \(1\)

HARDWARE AND TOOLS

tunuo Rectangular Frameless LED Mirror fig
\(2\) tunuo Rectangular Frameless LED Mirror fig
\(3\)

Level and mark the mirror’s location on the wall.tunuo Rectangular Frameless
LED Mirror fig \(4\)

Use the tape measure the height, and draw the horizontal, line and the vertical line of the wash-basin. Measure the distance of the mirror hole, and mark the hole place on the wall.tunuo Rectangular Frameless LED Mirror fig
\(5\)

Drill and insert the Wall Anchor, Drive in the screw cross the bottom support.tunuo Rectangular Frameless LED Mirror fig
\(6\)

Align the top hanging structure of the frame on the back of the mirror with the Aluminum Alloy Plateon which have been mounted on the wall, and hang them to complete the installation.tunuo Rectangular Frameless LED Mirror fig
\(7\)

Introduction of Touch Functiontunuo Rectangular Frameless LED Mirror fig
\(9\)

For any questions or queries regarding our products, please contact our support team- customerservice@tunuo.net or call (909)9907895
Visit our website for more information https://tunuo.net

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals