P81 1:76 RC Semi Truck

Product Information

Specifications

• Package Contents:

  • 1 Manual
  • USB & Type-C line: 1
  • Type-C & Type-C line + 1 Bind
  • 1 Clump weight
  • 1 Transmitter 2
  • 1 Semi-Truck
  • Double-sided tape + Rearview mirror sticker

• Front Lights:

  • High and low beams (white light)

• Rear Lights:

  • Tail lights (red light)
  • Brake lights

• Grille Light: White light

• Seat Light: Blue light

• Headlights: Four color lights (red, green, blue, and
  white)

• Reversing Light: Code matching light (white light)

• Turn Signal: Orange light

Product Usage Instructions

1. Transmitter Battery Installation

1. Open the remote control battery cover.

2. Install four new AA batteries into the battery box bracket,
   following the polarity mark.

3. Close the battery cover, ensuring it clicks into place.

2. Charging

When the car is powered off, it can be charged in the following
two ways:

2.1 Charging via Remote Control

1. Insert the charging cable into the Type-C port of the remote
   control.

2. Ensure the car is in a shutdown state, then connect the
   charging cable to the car’s charging port.

3. The car’s charging indicator light will remain on for a long
   time. If the light goes out, it indicates that charging is
   complete.

4. Reminder: The remote control can charge the car when turned on
   or off.

2.2 Charging via Power Supply

1. Insert the attached charging cable into the charging port of
   the car.

2. Connect the power supply for charging.

3. Tip: When the car is powered on, it will not be charged. To
   charge the car, turn off the car’s power switch.

FAQ

Q: Can non-rechargeable batteries be charged?

A: No, non-rechargeable batteries cannot be charged.

Q: Can different types of batteries or old and new batteries be

mixed?

A: No, different types of batteries or old and new batteries
should not be mixed.

Q: How long should I charge the car for?

A: The charging time for the car is approximately 40 minutes
with a red light indicator. Once the indicator light goes out, it
indicates that charging is complete.

Q: Can I charge the car while the remote control is turned

on?

A: Yes, you can charge the car while the remote control is
turned on or off.

Please read the manual before using the product and keep the manual for future use.
SAFETY INFORMATION
° Movable parts are dangerous, so it is forbidden to put fingersahairaclothes and other things into the space between the tire and the car body, to avoid being clamped by the rotating parts.
° Please play the car with the following scence: Please don’t play in places where the car is running or near children, then avoid the risk of collision. Please don’t play it in sandawater or dust, then avoid trobule. Please don’t play towards people or animal, then avoid accident.
° For functional requirements, this product contains sharp parts, please follow the correct steps and use methods, pay attention to eye safety.
° Please don’t bend or throw the product or play it with rough ways, then avoid an accidents.
° Please don’t put this product into water or fire source(such as stoveagas stove,etc.), then avoid accidents.

THE PACKAGE CONTAINS

i

1*Manual

USB&Type-C line *1

Type-C&Type-C line + 1*Bind

1* Clump weight

1*Transmitter 2

1* Semi-Truck

Double-sided tape+Rearview mirror sticker

FUNCTION DESCRIPTION

Right front lamp High and low beam lamps
Right turn signal

Headlight
Seat compartment light Left front lamp grille lamp High and low beam lamps
Left turn signal

Forward/backward Turn right/turn left

Forward/backward Tail lights/turn signals/reversing lights

Tail lights/turn signals/reversing lights

Recharging hole: connect Type-C line Pair hole

Recharging hole: connect Type-C line

Power switch

Pair hole Power switch

1. The front lights are high and low beams cwhite light 2. The rear tail is equipped with tail lights (red light)
brake lights 3. The grille light is white light 4. The seat light is blue light

5. The headlights are four color lights (red, green, blue, and white)
6. The reversing light is also a code matching light (white light)
7. The turn signal is orange light

3

PREPARE FOR RUN
1 Transmitter battery installation
This remote uses AA battery or Ni MH battery, when the voltage is lower than 4.5V ± 0.2V, the LED starts flashing.
Note: instructions for safe use of the replaceable battery of the remote control:
1. non rechargeable batteries cannot be charged; rechargeable batteries can only be charged under the supervision of adults.
2. the rechargeable battery shall be removed from the remote control before charging; different types of batteries or old and new batteries cannot Mixed use.
3. the battery shall be placed in the correct polarity; the exhausted battery shall be taken out from the remote control; the power terminal shall not Short circuit to.
1. Transmitter battery installation. (Picture 1-3)
1. Open the remote control battery cover.
2. Install according to the polarity mark on the battery box bracketFour new AA batteries.
3. Then close the battery cover. Ensure that the battery cover clicks in In place. Check if it is in the correct position.

WARNING

DO NOT KEEP THE BATTERY IN THE BATTERY COMPARTMENT FOR A LONG TIME TO AVOID BATTERY OXIDATION AND DAMAGE THE PRODUCT.

4

2 Charging
When the car is in power off status, it can be charged in the following two ways; (Please charge the RC car for the first time you use.)
1. Use the hidden Type-C port on the remote to charge the car.(Picture 1-3)
Remote control output voltage and current: 5V 500MA

1. Insert the charging cable into the Type-C port of the remote control.
Reminder: Remote control output voltage and current: 5V 500MA

2. The car must be in a shutdown state, and then the charging cable must be connected Insert the car port for charging.

Red light

Red light 40min

Charging indicator light

60min
Charging indicator light Extinguish

Extinguish

3. At this point, the car’s charging indicator light remains on for a long time. If the car’s charging indicator light goes out, it indicates that charging is complete.
Reminder: When charging, the remote control can charge the car when turned on or off.
5

2. Insert the attached charging cable into the charging port of the car and connect the power supply for charging. (as picture shows)
Tip: When the car is power on, it will not be charged when charging power is inserted. lf need charge the car, the car’s power switch must be turned “OFF”.
The remote control car should be charged by an adult; The charger is not a toy, The remote control car can only use the recommended charger (5V/1A); Disconnect the remote control car from the charger before cleaning.
Note: Before charging the car, make sure the charging plug is dry. Do not leave when charging the car.

Charging indicator light
Red light 40min
Extinguish

Charging indicator light
Red light 60min
Extinguish

6

3 Turn on/off the power of the car
Car startup: in the shutdown state, turn on the power switch (push to the “on” position), The vehicle starts up after the LED lights up for 1 second.
If the front light of the car stays on, it indicates that it’s connected with the remote control. If the front light of the car is flashing, please check whether the power of remote control has been turned on. If yes, you need to re-code the remote control with the car. (See page 10 for details) Turn off the car: Turn off the power switch, (switch to “OFF” position), the LED goes off and the the car is power off.
4Vehicle battery replacement/peripheral power supply
If it is necessary to disassemble or replace the battery, please pay attention to the correct plug position. If the battery is connected to the external power port, the vehicle will be directly powered on, and plugging it in backwards will cause the power switch to be inoperable, and the vehicle will not be able to charge. Please connect the battery correctly.
1. Connect the battery socket to the front of the vehicle 2. Connect the trailer to the battery socket, and connect the trailer to the external power port,Voltage 3.2-4.2V
7

OPERATION NOTE Note: If you’re the first time to use the 1:76 RC car, please take a few minutes to read this statement carefully to get familiar with different features of this operation system.
1 Functions Transmitter

9CH 5CH

6CH 10CH

R 7CH OFF
L
2CH-TRIM

8CH H M L
3CH-TRIM

4CH-TRIM

1CH-TRIM

3CH-REV 4CH-REV 2CH

4CH

4CH

2CH

2CH-REV 1CH-REV 3CH

1CH

1CH

3CH

8

1CH (direction): Control left and right turns.
2CH (throttle): Control the throttle to move forward, brake, and backward (Brake lights, backup lights)
1CH-TRIM: When the steering lever is at the center point, if the vehicle cannot walk in a straight line, please use steering fine adjustment.
3CH: Up represents the horn/down represents the turn signal lights on the left and right sides.
4CH: Cycle left and right to switch headlights (red green blue white)
5CH: Control the lifting and lowering of the chassis tripod of the container carriage. 7CH: Turn signal quick switch/third gear switch: up for right turn signal on – middle for off – down for Left turn signal.

1CH-REV: Use the reverse steering switch to reverse the left and right directions.
2CH REV: Using the throttle reverse switch,Reverse the front and rear directions.
2CH TRIM: When the steering lever is at the center point, if the vehicle is moving forward or backward, please use the throttle to adjust it slightly.
3CH-REV: Use the CH3-REV reverse switch to reverse the direction of the horn and turn signal.
4CH-REV: Use the CH4-REV reverse switch to reverse the order of the headlights.
6CH: Control the sound switch.
8CH: Fast speed gear/switch up for fast speedGear medium speed gear in the middle – slow speed gear down.

9CH: Container car: °Press for the first time: low beam headlights+tail lights °Press the second time: high beam lights+tail lights °Press the third time: high beam lights+tail lights+grille lights °Press the fourth time: high beam lights, tail lights, grille lights, and headlights (this mode can be switched between red, green, blue, and white through the CH4 ) °Press the fifth time: high beam lights, tail lights, grille lights, and headlights (this mode can be switched between red, green, blue, and white through the CH4 )+Seat compartment light °Press for the sixth time: high beam lights, tail lights, grille lights, and headlights (this mode can be switched between red, green, blue, and white through the CH4 channel)+Seat compartment lights+front and rear fog lights °Press for the seventh time: high beam lights, tail lights, grille lights, and headlights (this mode can be switched between red, green, blue, and white through the CH4 channel)+Seat lights+front and rear fog lights+hazard warning lights flashing and warning tone °Press the eighth time to turn off the lights
10CH: Container trucks:
°Press the first time: the tail light is on (red light) °Press for the second time: tail light on (red light)+rear fog light always on (orange light) °Press the third time: tail light on (red light)+hazard warning light flashing °Press the fourth time: turn off the lights °The rear of the container can be synchronized with the front of the vehicle: the brake light/reversing light/turn
signal light/reversing light is (white light) and is also a matching light

9

2 Remote control battery case
When installing a new battery case for the remote control, pay attention to the positive and negative poles of the JST plug, do not plug it in backwards!

Battery box

4x 1.5v (AA)
1.5v (AA) 1.5v (AA) 1.5v (AA) 1.5v (AA)

JST 12

3 Binding
1.Switch on the transmitter.
2.Turn on the power switch on the car, and the front light on the car flashes.
3. Using the binding pin plug into the BIND hole to pair the truck to the remote, and the vehicle’s tail light LED changes from flashing to off, Indicates that the remote control has successfully paired with the vehicle.
Reminder: Both the tractor and trailer should be paired.

BIND
Tip: If fail binding , please turn off the power switch of the car and remote , and restart the binding. Note: The rc car has been connected to the remote. The above procedure is only necessary when use a new remote
or car. Turn off the car: Please turn off the power switch of the car first, and then turn off the power switch of the remote
to prevent the car from losing control.
10

4 Car running settings

F

L

R

B

Forward/speed up

Left

Right

° Throttle trigger: Control forward / brake /backward. ° Steering wheel: Control left / right steering.

Brake /Backward

°1CH/TRIM: When the steering wheel in the middle position, if the front wheel is not in a straight line, please adjust it with 1CH/TRIM “+” or “-“button.

Linearity
11

SPECIFICATION

Product name 1: 76 RC Tractor

Driving distance

30m

Slope angle

30°

Drive mode
Proportional steering
Weight

Four-wheel drive Proportional steering
55g

Model Scale Driving time Size
Battery

C50-T
1:76 40min
80x41x49.3mm
3.7Va150mAh lithium battery Note: The lithium battery is built-in and detachable

Product name 1: 76 RC Trailer Driving distance 30M

Weight

40g

Size

161.7x35x56.2mm

Model Scale charging time
Battery

C50-C
1:76
40min
3.7Va75mAh lithium battery Note: The lithium battery is built-in and detachable

LED LIGHT STATUS TABLE

Display The tail lights of the vehicle flash once every 2 seconds
The tail lights of the vehicle are off
The front and tail lights are off

Status
Please check whether the power of remote control has been turned on, if yes, you need to re-code the remote control with the car
The remote control is connected to the car and can be operated
The vehicle is in a shutdown state and the battery is low; CH9, closed state; CH10, closed state

12

PRODUCT PERFORMANCE FAILURE TABLE

Product Name

Product performance failure

1: 76 RC Semi-Truck

1. The product cannot be turned on. 2. Cannot charge. 3. Unable to operate. 4. Dysfunction.

MAINTENANCE
1. Before using the product, please ensure that all components have been tightened, check and clear foreign matter in the gap between the wheel and chassis.
2. When the car is to be stored for a long time, it should be kept at 70% of its power to maximize battery life. And charge the battery once every 1-3 months to avoid battery damage. (It is recommended to fully charge the battery and store it after 5-10 minutes of use).
3.If the remote control will not be used for a long time, please remove the batteries to avoid oxidation.

13

TROUBLESHOOTING

Fault symptom

Cause of failure

The tranmitter connection failed

1. Distance is too far
2. Multicars pairing at the same time

Solutions
Make sure that the product is in car receiving mode.(The headlights flash).

Freeze

Foreign object between the wheels

Check the wheels for foreign objects

No reaction when remote control left and right steering / no response when steering

The steering angle is set too small

Clean foreign objects between the wheels Restart the remote control and vehicle

The steering is in the opposite direction of the remote steering operation

The remote steering reverse switch is not properly set

Set the remote steering reverse switch to the correct direction

When the throttle is in neutral position, the car immediately starts to move forward or backward

The throttle fine-tuning does not set to the center position

Set the remote throttle fine-tuning to the center position

The car cannot move in a straight line/The left and right steering radius is significantly different
The maximum speed cannot be reached
Overheating in the motor part The power-on light is not on
Shutdown

Steering fine-tuning is not set to the center position

Set the steering fine-tuning to the center position

1. The speed gear setting is too small
2. Low battery level 3. There are foreign objects
between the wheels
Ambient temperature is too high

Set the remote control gear to maximum, And check for foreign objects and battery power between the wheels Is the quantity sufficient
The car should be immediately turned off and placed in a cool, well-ventilated place for cooling to avoid damage to electronic parts

The voltage is less than 3.0V and there is not enough power

Charge in a timely manner

14

PRECAUTION
° The car contains lithium batteries. Disassembling, striking, squeezing or throwing the car into the fire is prohibited. If severe swelling occurs, do not continue to use it. Do not place it in high-temperature environment.
° Due to the special feature of lithium batteries, overly high or low temperature will affect the battery charge and discharge performance and battery life, so please do not use or store this product under environments such as high temperature, low temperature, high humidity or direct sunlight.
° The charging cable, plug, body shell, and other parts must be checked regularly for damage. If the damage is found, stop using until the repair is complete.
° The car has low battery voltage protection. ° When the battery voltage is lower than 3.0V, it will automatically cut off the current and the car will seize
all functions to protect the battery. ° When using remote control nearby high- voltage power lines, light rails, microwave ovens electric waves of
the same frequency will lead to dysfunction of the car. Please change the location or choose another time to operate. ° Our company holds no responsibility if accidents such as injury to others or damage due to operating errors.
NON-WARRANTY REGULATIONS
° Unauthorized repair, misuse, collision, negligence, abuse, fluid intake, accidents, alterations, incorrect use. Non-product accessories, or tear, alter marks and anti-counterfeiting marks;
° The validity period of “three guarantees” has passed. ° Damage caused by force majeure; ° Does not meet the performance failures listed in “performance failure table of 1: 76 RC Semi-Truck”; ° Performance failure of the product and its accessories that meets the “performance failure table of
1: 76 RC Semi-Truck” due to human factors.
1. Return and exchange services require confirmation. When the client applies for return and exchange, it is necessary to follow the 1: 76 RC Semi-Truck warranty instructions and the customer service should confirm whether it meets the after-sales conditions and then arrange relevant service.
Notice: The products, accessories, remote control, etc. in the instruction manual are schematic diagrams and for reference only. Due to product updates and upgrades the physical and schematics of the product may differ slightly, please refer to the actual product.
15

INSTALLATION OF SEMI-TRUCK
1
1. Insert the trailer bottom hook along the locking position. 2. Then proceed downwards.
CONTAINER ACCESSORIES DIAGRAM
16

ASSEMBLY METHOD OF CONTAINER ACCESSORIES
17

General assembly drawing

Tractor explosion diagram Bumper
Spring Steering Assembly
18

Bodyshell
screw Car platform PCB
Upper shell Transmission gear set Gearbox Rear-wheel
Bottom shell

Explosion diagram of car shell
760251 760250 760249 760255 760258
760254

760248 760261 760247
760252
760262 760253 760052 760256 760257

19

Tractor transmission shaft

760241

760227 760217
760006

Tractor rear wheel

760226
760241 760216 760243

760228 760218
760242 760245
20

Tractor steering

760244 760236

760237

760213 760238 760240 760228

760214

760234 760235

21

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>