ATEN UCE260 USB 2.0 Extender User Guide
- May 15, 2024
- Aten
Table of Contents
UCE260
USB 2.0 Extender
Quick Start Guide
Package Contents
1 Local Unit with USB Cable
1 Remote Unit
1 Power Adapter (5V, 2.6A)
1 User lnstructions
A Hardware Review
B Hardware Installation UCE260 USB 2.0 Extender Quick
Start Guide
Hardware Review A
- USB Type A Male
- RJ45 Jack
- USB Type A Female
- LED
- Power Jack
Hardware Installation B
- Connect the Local Unit to the Host System (or PC) via the supplied USB Cable on Local Unit.
- Connect the USB 2.0 Extender Local Unit and Remote Unit together with a Cat.5, Cat 5e or Cat.6 Cable (supplied by user).
- Connect USB peripherals to the Remote Unit.
- Plug the included 5V/2.6A DC Power Supply into the USB 2.0 Extender Remote Unit. Operational power for the Local Unit is provided by the Host System (or PC).
- Check the LED on USB 2.0 Extender Remote Unit. Make sure that the LED on Remote Unit illuminates in solid green light that means the extenders are powered and well communicated.
Support and Documentation Notice
All information, documentation, firmware, software utilities, and
specifications contained in this package are subject to change without prior
notification by the manufacturer.
To reduce the environmental impact of our products, ATEN documentation and
software can be found online at http://www.aten.com/download/
Technical Support www.aten.com/support
Scan for more information
Product Page
https://www.aten.com/global/en/products/usb-solutions/extenders/uce260/
www.aten.com
© Copyright 2023 ATEN® International Co. Ltd.
ATEN and the ATEN logo are registered trademarks of ATEN International Co.,
Ltd. All rights
reserved. All other trademarks are the property of their respective
owners.
Released: 06/2023
Documents / Resources
| ATEN
UCE260 USB 2.0
Extender
[pdf] User Guide
UCE260, UCE260 USB 2.0 Extender, USB 2.0 Extender, Extender
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>