LUTRON PD-6WCL Caseta Wireless In-Wall Dimmer with Pico Remote Control User Guide
- June 6, 2024
- Lutron
Table of Contents
- LUTRON PD-6WCL Caseta Wireless In-Wall Dimmer with Pico Remote Control
- **What you need for a 3-way installation
- Choose a location for your Caséta Wireless in-wall dimmer
- Turn power off at circuit breaker
- Remove existing switch from wall
- Tag and disconnect wires from the existing switch
- Remove side sections (if necessary)
- Connect the Caséta Wireless in-wall dimmer
- Mount the Caséta Wireless in-wall dimmer
- Attach the wallplate
- Remove existing switch from wall at Location 2
- Tag and disconnect wires from the switch
- Connect the wires
- Attach the wallplate bracket and Pico remote control
- Attach the wallplate
- Turn power on at circuit breaker
- Press and hold “Off” button on in-wall dimmer
- Press and hold “Off” button on remote control
- Pair additional remote controls
- Schematic Diagram
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
LUTRON PD-6WCL Caseta Wireless In-Wall Dimmer with Pico Remote Control
Identify existing wiring
Two switches control the lights (3-way installation)
Important note:
- If one switch controls the lights (single-pole installation) See quick-start guide that came with your in-wall dimmer
- If three or more switches control the lights(multi-location installation) See page 36 for details
**What you need for a 3-way installation
**
Choose a location for your Caséta Wireless in-wall dimmer
Choose which location you want the Caséta Wireless in-wall dimmer installed in. This will be Location 1.
Turn power off at circuit breaker
WARNING: Shock Hazard. May result in serious injury or death. Turn off power at circuit breaker before installing the unit.
Remove existing switch from wall
Location 1
Tag and disconnect wires from the existing switch
Location 1: Place tag – to identify wire on different color screw
Remove side sections (if necessary)
When installing more than one Caséta Wireless in-wall dimmer in the same
wallbox, it is necessary to remove inner side sections prior to wiring. See
image and chart below for more information.
Important note: Removing side sections reduces the in-wall dimmer’s
maximum wattage rating. See the chart below for maximum wattage information
.
Connect the Caséta Wireless in-wall dimmer
Mount the Caséta Wireless in-wall dimmer
Location 1
Attach the wallplate
Location 1
Remove existing switch from wall at Location 2
Location 2
Tag and disconnect wires from the switch
Location 2
Connect the wires
Location 2
Attach the wallplate bracket and Pico remote control
Location 2
Attach the wallplate
Location 2
Turn power on at circuit breaker
Press and hold “Off” button on in-wall dimmer
Location 1
Press and hold “Off” button on remote control
Location 2
Pair additional remote controls
Repeat steps 17 and 18 to pair additional remote controls.
Schematic Diagram
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>