DELTACO SH-IPC09 Smart WiFi Camera User Manual

June 3, 2024
DELTACO

SH-IPC09
SMART WIFI CAMERA
User Manual

SH-IPC09 Smart WiFi Camera

DELTACO SH IPC09 Smart WiFi Camera - Figure 2| DELTACO SH IPC09 Smart WiFi Camera - Figure 1
---|---

Thank you for choosing Deltaco!

  1. Speaker
  2. Passive infrared sensor
  3. Camera lens
  4. LED
  5. Reset button
  6. Light sensor
  7. USB Micro-B charge port
  8. LED (charge status)
  9. Microphone
  10. MicroSD slot

The camera has a built-in battery. Use the USB cable to charge.

To power on/off, press and hold the button for 3 seconds to turn the camera on or off.

Mounting

This product has 2 different brackets for mounting. Choose a bracket for your needs.
Bracket (B) is commonly used outdoors.
Bracket (A) is popular because it is using a magnet.
Drill holes in the wall or ceiling for the bracket.

Mounting (A) Mounting (B)
![DELTACO SH IPC09 Smart WiFi Camera - Figure 4](https://manuals.plus/wp-

content/uploads/2022/12/DELTACO-SH-IPC09-Smart-WiFi-Camera-Figure-4.jpg)

B. Adjust the camera angle by aiming and rotating it. Fasten the screw.

Reset
Press and hold about 5 seconds for reset.
Any changed settings will change to factory default.

LED status

Camera LED
Red = the camera is just turning on or there is something malfunctioning.
Flashing red = waiting for WiFi connection.
Flashing red fast = connecting to WiFi.
Blue = connected.
Charge LED
Red = charging.
Blue = Fully charged.
ONVIF
For use of ONVIF, please check the product’s page on Deltaco’s website.

Install and use

  1. Download and install the app “Deltaco smart home” from Apple App Store or Google Play Store on your mobile device.

  2. Launch the app “Deltaco smart home“.

  3. Create a new account or log in to your existing account.

  4. Tap “+” to add the device.

  5. Choose category and then the type of product from the list.

  6. Connect the device to power.

  7. If the LED/lamp does not flash: Reset the device.
    If the status indicator flashes: Confirm in the app.

  8. Confirm the Wi-Fi network and password.

  9. Enter the device name.

Cleaning and maintenance

Do not use cleaning solvents or abrasives.
Do not clean the inside of the device.
Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
Clean the outside of the device using a soft cloth.

Support
More product information can be found at www.deltaco.eu.
Contact us by e-mail: help@deltaco.eu.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals