GAS MAX S1-15D2 10 Inches solidity for CHEAP Fanatic Audio User Manual

: June 3, 2024
: GAS

Table of Contents

GAS MAX S1-15D2 10 Inches solidity for CHEAP Fanatic Audio
SAFETY
UNPACKING
DIMENSIONS
SPECIFICATIONS
PERFORMANCE
- THIELE/SMALL PARAMETERS
IMPEDANCE VS FREQUENCY
FEATURES
HOW TO
- BUILD ENCLOSURE
- DO I NEED POLYFILL?
TROUBLESHOOTING
WARRANTY & DISPOSAL
THE GAS WORLD
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

GAS MAX S1-15D2 10 Inches solidity for CHEAP Fanatic Audio

GAS-MAX-S1-15D2-10-Inches-solidity-for-CHEAP-Fanatic-product-
image

SAFETY

NO COMPROMISES! Especially when it comes to safety. Before installing your MAX S1 series subwoofer, make sure that you read through the manual thoroughly and follow the instructions. Save the manual for future usage and reference!
Make sure to pay attention to the instructions when you see this symbol:
Do not expose your new subwoofer to excessive damp or moisture. If the subwoofer is exposed it might result in electric failure, shock or damage to the product. Servicing is required when the product has been damaged in any way and/or doesn’t operate
normally. Refer all servicing to qualiﬁed service personnel only.
Keep the cables inside the vehicle separate from sharp edges or components that may be affected or take damage. Follow the recommended cable sizes and always use high quality cables and accessories. Even if you’re eager to put the subwoofer to use – take no shortcuts when installing the cables, make sure that all connectors are protected and secured.
Do not drill any holes without checking what lies beneath, and don’t cut anything without making sure that no important components risk being damaged.
There is a ﬁrst time for everything, if you need help – ask a friend or contact your local
GAS AUDIO POWER dealer/installer.
We want you to experience your products to the MAX, but we don’t want you to injure yourself or others. Use common sense, respect high pressure levels and volume, and follow your local laws and regulations.

UNPACKING

Unboxing your new MAX product is an experience, make sure that the subwoofer and all the accessories are included in the packaging:

DIMENSIONS

| A| B| C| D| E| F| G|
---|---|---|---|---|---|---|---|---
S1- 12D1/D2| Ø326| Ø303| Ø6| Ø202| Ø285| 187| 203| mm
S1- 15D1/D2| Ø396| Ø375| Ø6| Ø202| Ø350| 206| 222| mm
S1- 18D1| Ø470| Ø446| Ø6| Ø202| Ø423| 258| 275| mm

SPECIFICATIONS

Below you’ll ﬁnd the speciﬁcations that has been checked and tested in our workshop. The speciﬁed sensitivity isn’t directly connected with the sound pressure in the vehicle, and
shouldn’t be used as the sole indicator for comparison with other subwoofers.

MAX S1- 12D1

Component

|

Subwoofer

---|---
Size| 12” (300mm)
Nominal impedance| 1+1 Ohm
Power RMS| 1600W
Power MAX| 3200W
Freq. response| 20- 200Hz
Voice coil| Dual 3” PCW
Voice coil former| Aluminum
Cone| Non-Pressed Paper
Dustcap| 3D IMPP
Basket| Aluminum T-bone
Magnet| 2x100oz HQ Ferrite
Suspension| High roll foam

w. dual stitch

Spider| Dual Nomex
Tinsel| Dual silver coated leads
Terminal| Heavy duty push terminals
Weight| 13.2 KG
MAX S1- 12D2

Component

|

Subwoofer

---|---
Size| 12” (300mm)
Nominal impedance| 2+2 Ohm
Power RMS| 1600W
Power MAX| 3200W
Freq. response| 20- 200Hz
Voice coil| Dual 3” PCW
Voice coil former| Aluminum
Cone| Non-Pressed Paper
Dustcap| 3D IMPP
Basket| Aluminum T-bone
Magnet| 2x100oz HQ Ferrite
Suspension| High roll foam

w. dual stitch

Spider| Dual Nomex
Tinsel| Dual silver coated leads
Terminal| Heavy duty push terminals
Weight| 13.2 KG
MAX S1- 18D1

Component

|

Subwoofer

---|---
Size| 18” (460mm)
Nominal impedance| 1+1 Ohm
Power RMS| 1800W
Power MAX| 3600W
Freq. response| 18- 200Hz
Voice coil| Dual 3” PCW
Voice coil former| Aluminum
Cone| Non-Pressed Paper
Dustcap| 3D IMPP
Basket| HD Aluminum
Magnet| 2x100oz HQ Ferrite
Suspension| High roll foam

w. dual stitch

Spider| Dual Nomex
Tinsel| Dual silver coated leads
Terminal| Heavy duty push terminals
Weight| 15.3 KG

PERFORMANCE

THIELE/SMALL PARAMETERS

Impedance	1+1 Ohm	2+2 Ohm

Re Fs Qms Qes

Qts

| 1.8 Ohm| 3.8 Ohm
27.4Hz| 25.6Hz
5.81| 6.15
0.53| 0.52
0.48| 0.48
Vas| 33.4 L| 33.4 L
Sd (cm²)

Mms

| 530| 530
345.8 g| 391.7 g
Le

Xmax

Driver Vol. Displacement

| 13.9| 22.3
3.1 L| 3.1 L
Impedance| 1+1 Ohm| 2+2 Ohm
---|---|---
Re Fs Qms Qes

Qts

| 1.8 Ohm| 3.8 Ohm
25.5Hz| 24.4Hz
5.99| 6.33
0.54| 0.58
0.49| 0.53
Vas| 76.3 L| 79.7 L
Sd (cm²)

Mms

| 829| 829
451.8 g| 468.2 g
Le

Xmax

Driver Vol. Displacement

| 14.6| 22.2
4.1 L| 4.1 L

IMPEDANCE VS FREQUENCY

FEATURES

If you have this in your hand, you have ﬁnally made it. Congratulations! You are ready to take
the next step, to enter a world of NO COMPROMISES with a subwoofer that will take your car
to a whole new level. So get out there and impress the non-believers! Show them that true
dedication comes from the inside of your trunk and that “good enough” just doesn’t cut it.

NEXT LEVEL BASS
A MAX subwoofer is designed to test the limits and match your dedication in performance and style. Made for the hardcore bass heads out there – with a rigid and durable cone made by non-pressed paper with Mica minerals that perfectly balances awesome power, weight and musicality.

MADE TO MOVE
The dust cap is made of IMPP for a unique 3D design, an idea we borrowed from the MAD S2 series. But since this is MAX, we took it one step further. With an impressive high roll foam suspension, you get even more awesome cone movement. The 3-inch dual voice coil wire is made of PCW (Pure Copper Wire) and we’ve introduced a bumped back plate for some extra mechanical Xmax, which also minimizes the risk of voice coil damage.

TUNED TO THE EXTREME
The MAX S1 subwoofers will let everyone know that your audio dedication is real. No detail has been overseen, and no compromises have been made. We show our dedication to the craft of bass with dual stacked HQ ferrite magnets to achieve an insane amount of motor in the subwoofer. We’ve also added a Dual Nomex spider and dual stitching for extra durability, to make sure that the last thing standing will be your sound system. This subwoofer is extre-
me and over the top, as it should be!

COOLEST SUBWOOFER ON THE BLOCK
The MAX S1 will show everyone that you have reached the next level, the MAX level. Having a subwoofer perform at this level demands extremely good ventilation. Only the best and
beyond is good enough! We solved the cooling in two different ways. The material in the
top/back plate is thicker for optimal heat conduction, and the implemented DVS2 (Dual Ventilation System) creates incredible heat dissipation while also reducing distortion.

HOW TO

INSTALL SUBWOOFER
Before installing your brand new subwoofer, make sure that you have everything you need. Have the right tools ready, and make sure that you have the necessary knowledge/skill to
perform the installation properly. Preparation and knowledge is crucial!
The MAX S1-12D1/S1-15D1/S1-18D1 uses dual 1 Ohm voice coils, while the MAX S1-12D2 /S1-15D2 uses dual 2 Ohm voice coils. If you want to connect two or more S1 series sub-
woofers, you can vary the impedance by altering the wiring conﬁguration to use a series, parallel or series-parallel setup. The more the merrier!
Make sure to look through the recommended wiring schematics below and choose the setup that corresponds with the number of subwoofers in your sound system. Take note of
the impedance stability of your ampliﬁer. Don’t be afraid to consult your local GAS AUDIO
POWER dealer/installer if you have any questions.

BUILD ENCLOSURE

If you want a LOUD and awesome looking sound system, you should mount your MAX subwoofer in an enclosure. Here’s information about optimized volumes for different types of enclosures and how they perform with the MAX S1 subwoofer. If you feel unsure about how to build an enclosure on your own, consult a local GAS AUDIO POWER dealer/installer.

DO I NEED POLYFILL?

Hell yeah! We recommend using polyﬁll for all sealed, vented and bandpass enclosures for
the best overall performance.
A polyﬁlled enclosure will bring out the full potential of your subwoofer, by starting an isothermal process when energy ﬂows through the ﬁbers (very scientiﬁc). This means that the air gets more dense, so it lessens the BOOM and brings out the BASS! It can also reduce harmonic distortion. Sounds complicated, we know. But it’s easy to do! Cover two sides in a ported enclosure or make a loose polyﬁll ball behind the driver in a sealed enclosure. Try it out! If you like the bass to hit harder – just take away some. Do you want to lessen the effect?
Put in some more.

TROUBLESHOOTING

NO POWER/SOUND
Check the subwoofer to make sure it isn’t damaged. If your subwoofer doesn’t get any power, the most common issue is either in the wiring or in the ampliﬁer. Use a multimeter to measure the ampliﬁer’s voltage on the +12V terminal and the remote signal terminal. Use a multimeter to make sure that you have a negative ground connection. Check the built-in fuse (if there’s one) on the ampliﬁer. If there’s no power coming through – control the fuse on the power cable. If this is intact – make a full check of the wiring to ensure cable integrity. Check all the speakers connected to your sound system. Check all the speaker cables and all the signal cables. Check your head unit to make sure no settings are limiting the ampliﬁer’s functions or the subwoofer. When all of the above has been tested/looked over, and all is as it should be but there’s still no sound, consult your local GAS dealer.

UNWANTED NOISE
Start by looking over the subwoofer and other speakers in the sound system so there is no damage or connection issue with the wiring. Make sure that your signal cables or speaker cables aren’t too close to the power cables. Check your ampliﬁer’s grounding point and make sure that the surface is clean. When all of the above has been tested/looked over, and the unwanted noise does not vanish, consult your local GAS dealer DISTORTION
Start by looking over the subwoofer and other speakers in the sound system so there’s no damage or connection issue with the wiring. Check the speaker cables to make sure that the polarity isn’t reversed on one channel. Check the settings on the ampliﬁer, make sure that the gain/level is set according to the ampliﬁer’s instructions. If your ampliﬁer has a boost function, lower its effect or turn it off.

WARRANTY & DISPOSAL

This product is covered by warranty, depending on the conditions in the country where it’s sold. If the subwoofer is returned for service, please include the original dated receipt (or a copy) with the product. Make sure that the subwoofer is packaged properly and secured, preferably in its original packaging.
The crossed-out wheelie bin symbol means that the product, literature and packaging included must be taken to separate collection at the end of their working life. Don’t dispose of these products as unsorted municipal waste: take them for recycling. For info on your nearest recycling point, check with your local waste authority.
This product has been granted with the CE certiﬁcation mark to show that the product
follows the health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).
GAS Audio Power products comply with the relevant pro- visions of the RoHS Directive for the European Union. In common with all Electrical and Electronic Equipment (EEE) the product shouldn’t be disposed of as household waste. Alternative arrangements may apply in other jurisdictions.
GAS Audio Power is a global partner of the European Mobile Media Association, an organization that focus on promoting the custom made mobile media installations to consumers.

THE GAS WORLD

You’ve entered the world of GAS. We aim to please, and we’ve made sure to have products made for you. No matter what stage of the LOUD-addiction you might ﬁnd yourself in, there is a GAS product to ﬁll your need.
Just starting out? The MAD series is made to play LOUD and to be the express lane to a no bullsh!t sound system that will make sure everyone can hear you coming!
The MAX series holds products made to deserve the center stage. Powerful, heavy duty and designed to be noticed. We made NO COMPROMISES because we know that you wouldn’t accept it.
The CMP series has been developed for the crucial seconds when the dB-counter starts to tick. All CMP products have hand-picked, high quality, COMPETITION GRADE components and they are specially designed to withstand an awesome amount of power.