Guanyu W61 4 In 1 Wireless Charger Instruction Manual
- June 6, 2024
- Guanyu
Table of Contents
4 IN 1 WIRELESS
CHARGER
Use Instructions
Support models
-
Phone: iPhone 13, 13 Pro, 13 Pro Max,13, 12, 12 Pro, 12 Pro Max, 12,SE, 11, 11 Pro, Pro Max, XS, Xs Max, XR,x,8,8 Plus Samsung Galaxy: S21 SG,21 + SG, 21 Ultra 5G, FE SG, 20 SG,20 + 5G, 20 Ultra SG,10, 10 + toe,9,9 +,8,8 +,7,7 edge,6,6 edge,6 edge +,6 G9209, 6Active,Galaxy Note10,10e, 10 + 9,8,7,6,5
Other: All mobile phones that comply with the QI standard support wireless chargers -
Watch: Apple Watch S2,S3,S4,S5,S6,S7,SE
-
Earbuds: Airpods 2, AirPods 3, Airpods Pro
-
Pencil·Apple Pencil 1
Product Appearance
Bracket Introduction
Lighting Mode
| LED Status | Standby Mode | Phone Charging | FOD |
|---|---|---|---|
| LED Light | Green | ||
| Light on | Blue light breathing | Blue and Green Flashing |
Directions for use
- Please connect this wireless charger to a 5V/3A,9V/3A or 12V/2Aadapter via a Type-C fast charging cable and connect to the power supply.
- Place the phone in the charging area to charge.
- Hang the original watch in the watch charging position to charge the watch.
- Put the wireless bluetooth headset box on it to charge.
- lnsert the capacitive pen into the corresponding charging position to charge the capacitive pen
Product Parameter
| Product name | Four-in-one wireless charger |
|---|---|
| Input | 5V 3A , 9V 3A , 12V **** 2A(Max) |
| Size | 180.2 125.9 94.2mm |
| Conversion rate | ≥70%(Mobile charging) |
| DC output | 15W/10W/7.5W/5W |
| Watch output | 2W(Max) |
| Earbuds output | 3W(Max) |
| Capacitor pen output | 2W(Max) |
Note
To ensure charging 4 devices safely and efficiently, pis. use the QC3.0adapter and Type-C charging cable included the product package
Packing List
| 1. 4 in 1 Wireless charger X 1 | 2. Data line X 1 |
|---|---|
| 3 Instruction X 1 | 4. QC3.0 adapter X1 |
FCC Statement
This device complies with part 15 FCC Rules. Operation is Subject To the
following two conditions:
(1) This device may not cause harmful interference, and (2) this devicemust
accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not explicitly approved by the partyresponsible for
compliance could void the user’s authority tooperate this equipment.
Note: this equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to providereasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
canradiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications.However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference toradio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged totry to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC radiation exposure
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. During the operation of device a distance of 15 cm
surrounding the device and 20 cm above the top surface of the device must be
respected.