COOLMUSIC BP-60D Battery Powered Portable Acoustic Guitar Amplifier User Manual

**COOLMUSIC BP-60D Battery Powered Portable Acoustic Guitar Amplifier User Manual

**

Thank you for choosing our BP60D singing amplifier. Before using this product, please read the user manual first to understand the product functions, usage skills and precautions so that you can use this product better.

Overview

BP60D is a professional outdoor performance amplifier. Its configuration “28 inch woofer and 22 inch tweeter” enables it to output wonderful sounds in terms of vocal singing and instrument performance. It can be plugged into multiple devices such as microphones, guitars, electronic organs, saxophones, MP3s, mobile phones at the same time; in terms of battery life, BP60D is also equipped with a power lithium battery pack, which allows you to perform 4-10 hours of continuous outdoor performance; in terms of function selection In addition to the functions of balanced modulation, chorus, reverb, and delay, BP60D also expands the functions of B.T, USB playback, and external effects, which greatly meets the needs of users for multi-function speakers.

Precautions

 If your device has a built-in battery, you should pay attention to it during long-term storage: charge it as soon as possible when the battery is low, otherwise it will reduce the battery life;

• When using, please connect to a power outlet with grounding protection.
• Do not disassemble or modify the built-in components and wiring of this device by yourself.
• Please use the supplied adapter or power cord.
• Before use, make sure that the rated voltage of the equipment matches the mains voltage. Inconsistent voltage will cause equipment damage.
• Do not twist or bend the power cord excessively. This may cause a short circuit!
• Do not share too many electrical appliances with this product. Pay special attention to all your equipment, the total power must not exceed the power that the socket can withstand.
• When inserting the power cord plug into the socket, hold the power cord plug with your hand.
• Please avoid entanglement of power cord with various wires. In addition, keep away from children.
• When your hands are wet, do not take the power cord or insert or unplug the power cord plug.
• Before moving the device, unplug the power cord and all cables connected to the device.
• Before cleaning the device, turn off the power and unplug the power cord from the socket.
• If you suspect a lightning strike in your area, please unplug the power plug.

Do not place this equipment in the following places:

1. Places with excessive temperature
2. Humid place
3. Places with heavy humidity
4. Places directly exposed to rain
5. Dusty places
6. Places with strong vibrations

When the following situations occur, turn off the power immediately and unplug the plug:

1. Damaged adapter, power cord or plug
2. Smoke or peculiar smell occurs
3. The equipment is directly exposed to rain (or wet)
4. The equipment is not operating normally or has obvious abnormalities

Interface Description

Microphone In:

1. MIC 1(Support 48V phantom power)：
   This interface can be connected to a dynamic microphone or a condenser microphone;

2. MIC 2：
   This interface is used to connect microphones, guitars and other equipment;

3. 48V (48V phantom power)：
   Turn on this switch first, and then plug the “condenser microphone” into the “MIC 1” ( ) to use it normally;
   Musical Instrument In:

4. GT 1：
   Used to connect “guitar, electronic organ, saxophone” and other musical instruments;

5. GT 2：
   Used to connect “guitar, electronic organ, saxophone” and other musical instruments;
   Output:

6. D.I OUT：
   Can output the music played by amplifier to other music equipment;

7. HEADPHONE：
   Used to monitor speakers after connecting headphones;
   In / output:

8. AMP IN：This interface is used to connect the D.I output of other speakers to realize function of multi-device audio synchronization playback;

9. SENDS/RETURN：
   Use a “stereo to dual mono” audio cable, connect the stereo end to the amplifier, and connect the two mono channels to the input and output of the effector respectively to realize the function of the external amplifier effector.

10. AMP MUTE：
    Click the button, the indicator light will turn red, and the amplifier will enter ‘mute mode’
    Power/Charging:

11. Battery Indicator:
    If the indicator light is on “red”, please charge amplifier as soon as possible;

12. DC – IN：
    When battery is low, please use an adapter to connect to this port to charge amplifier;

13. Charging Indicator:
    The indicator light is red to indicate that it is charging, and the indicator light is blue to indicate that it is fully charged;

Control Instructions

Microphone 1 :

14. LOW：
    Used to adjust low frequency gain of ‘MIC 1’;

15. GAIN：
    Used to adjust the gain of ‘MIC 1’ ;

16. HIGH：
    Used to adjust high frequency gain of ‘MIC 1’;

17. REVERB：
    Used to adjust reverberation gain of ‘MIC 1’;
    Microphone 2 :

18. LOW：
    Used to adjust low frequency gain of ‘MIC 2’;

19. GAIN：
    Used to adjust the gain of ‘MIC 2’ ;

20. HIGH：
    Used to adjust high frequency gain of ‘MIC 2’;

21. REVERB：
    Used to adjust reverberation gain of ‘MIC 2’;
    Musical instrument :

22. LOW：
    Used to adjust low frequency gain of ‘Guitar 1/2’;

23. GAIN：
    Used to adjust the gain of ‘Guitar 1’ ;

24. HIGH：
    Used to adjust high frequency gain of ‘Guitar 1/2’;

25. GAIN：
    Used to adjust the gain of ‘Guitar 2’ ;

26. CHORUS/DELAY：
    The left side of the knob is used to adjust the chorus gain of’Guitar 1/2′; the right side is used to adjust delay gain of’Guitar 1/2′;

27. REVERB：
    Used to adjust reverberation gain of ‘Guitar 1/2’;
    Line In :

28. LEVEL：
    Used to adjust the gain of ‘Line in’ input audio;

29. Line in：
    Used to access “mobile phones, electronic organs, keyboards” and other equipment;
    Record :

30. LEVEL：
    Adjust the gain of the interface input audio;

31. PHONE：
    After this interface is connected to mobile phone through the “3.5mm audio cable”, the “live recording” function can be realized;
    USB / B.T :

32. USB：Insert USB flash drive, amplifier will turn off B.T and play songs in USB flash drive;

33. B.T：
    Long press：’on/off’ B.T;
    Twist right：Switch to next song;
    Twist left：Switch to previous song;
    Click：Start/pause;
    right and stay：Volume increase
    left and stay：Volume discrease;

34. POWER :control amplifier power”on/off”
    Note: After turning on B.T, use your mobile phone to search for a device whose B.T name is “coolmusic”, and you can use it normally after connecting.

Troubleshooting

1. Can’t turn on the machine:
   a. The battery is exhausted, please take the amplifier to charge as soon as possible;
   b. Troubleshoot the problem caused by the adapter failure: check whether the adapter indicator will be on;
   c. If the problem is still not resolved, please contact customer service or agent;

2. U disk cannot play music:
   a.U disk capacity is too large, it is recommended to use a U disk below 32G;
   b. The format of the USB flash drive is incorrect. Format the USB flash drive with the format of ‘FAT32’;
   c. There is a problem with the U disk itself, it is recommended to try another U disk;
   d. If the problem is still not resolved, please contact customer service or agent;

3. B.T cannot connect:
   a. Whether the B.T is normally turned on (the indicator light flashes, accompanied by a beep);
   b. If the indicator light flashes and then turns on again, the B.T has been connected by other devices;
   c. It may be a problem with the mobile phone, it is recommended to try another mobile phone;
   d. If the problem is still not resolved, please contact customer service or agent;

4. Battery problem:
   a. Poor endurance: the battery may be damaged due to long-term empty power;
   b. The amplifier cannot be charged: if the indicator light of the adapter is not on, the adapter is damaged;
   c. Please contact customer service or agent;

5. amplifier will not sound:
   a. Whether the mute switch of the amplifier has been turned on (AMP MUTE);
   b. Check whether the gain of the channel (GAIN) and the total volume knob (VOLUME) are turned on;
   c. Try each channel one by one to see if a certain audio channel is faulty;
   d. Check whether the sound source equipment is working properly (microphone, guitar, mobile phone, etc.);
   e. If the problem is still not resolved, please contact customer service or agent;

6. Loud amplifier noise:
   a. Try to unplug all external devices, including various musical instruments and adapters;
   b. Check whether it is caused by interference from equipment around the amplifier;
   c. If the problem is still not resolved, please contact customer service or agent;

Specifications

Tweeter 3 inch * 2
Frequency Range| 40 – 18kHz +0/-3dB
Weight| 9.1 KG
Adapter| Input voltage：110V – 230V Output voltage：18V – 3A
Battery| Lithium battery
Charge/ discharge| Charging time : 4-5 hours Life time : 4-10 hours
---|---
Control| POWER   switch
MUTE   Mute the device
48V Phantom power
VOLUME/GAIN: Volume/Gain adjustment CHORUS/REVERB/DELAY: Effect modulation MODE/ B.T
LOW/MID/HIGH : Balanced modulation
interface| MIC： Canon/6.35mm stereo interface GUITAR： 6.35mm mono audio interface RECORD： 3.5mm stereo interface HEADPHONE/SEND: 6.35mm stereo interface
D.I OUT/AMP IN: 6.35mm mono interface
DC-IN: 5.5-2.1mm jack

LEARN MORE

Documents / Resources

| COOLMUSIC BP-60D Battery Powered Portable Acoustic Guitar Amplifier [pdf] User Manual
Professional Outdoor Performance Amplifier, BP-60D Battery Powered Portable Acoustic Guitar Amplifier, BP-60D, Battery Powered Portable Acoustic Guitar Amplifier
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>