CoolMusic BP – MINI Bluetooth Amplifier Instruction Manual

June 17, 2024
COOLMUSIC

CoolMusic BP – MINI Bluetooth Amplifier

Product Information

Specifications

  • Model: BP-MINI
  • Rated Output Power: Peak – 30W, Rated – 40W
  • Input Level Speaker: -56dBu / 10k
  • Frequency Range: 20Hz – 20kHz
  • Control: POWER (switch), VOLUME (knob), CHORUS (effect knob), REVERB (effect knob), BASS/TREBLE (volume knob), B.T MODE (Bluetooth control button)
  • Interface:
    • MIC 6.35mm stereo audio interface
    • GUITAR 6.35mm mono audio interface
    • PHONE(Live broadcast) 3.5mm 4 section stereo interface
    • DC interface: 5.5-2.1mm jack
    • AUX-IN 3.5mm stereo audio interface
    • HEADPHONE / D.I OUT 6.35mm stereo audio interface
  • Size: Not specified
  • Weight: 3.5KG
  • Adapter: 5V/2A

Product Usage Instructions

Panel Overview

The panel of the BP-MINI battery powered portable amplifier consists of various controls and interfaces:

  1. Product barcode: Displays related information of the device.
  2. Headphone jack: Used for speaker monitoring.
  3. Charging indicator: The indicator light is red when charging and turns off when the battery is fully charged.
  4. Charging interface: Use the original power adapter to charge the amplifier.
  5. D.I output: Outputs the music played by the speaker to other music equipment.
  6. AUX-IN: Used to connect mobile audio devices such as mobile phones or MP3 players.

Controls and Functions

The BP-MINI amplifier has various controls and functions:

Control Function
VOLUME Adjusts the overall volume of the amplifier.
BASS Adjusts the low frequency volume.
TREBLE Adjusts the mid-high frequency volume.
REVERB Adjusts the reverb effect.
POWER Turns the amplifier on/off.
MIC Used to access microphones and other equipment.
GUITAR Used to connect guitars, microphones, and other equipment.
B.T MODE Bluetooth control button for wireless connection with a

phone.

Panel

The microphone controls on the amplifier are as follows:

  1. MIC: Used to access microphones and other equipment.
  2. Microphone volume: Adjusts the input volume of the microphone.
  3. Bass: Adjusts the low-frequency gain of the microphone.
  4. Treble: Adjusts the treble frequency gain of the microphone.
  5. Reverb: Adjusts the reverb effect of the microphone.
  6. Guitar: Used to connect guitars, microphones, and other equipment.
  7. Guitar volume: Adjusts the input volume of the guitar.
  8. Bass: Adjusts the low-frequency gain of the guitar.
  9. Treble: Adjusts the treble frequency gain of the guitar.
  10. Chorus: Adjusts the chorus effect of the guitar.
  11. Reverb: Adjusts the reverb effect of the guitar.
  12. Other channel volume: Adjusts the volume of B.T/PHONE/AUX, etc.
  13. PHONE (live): After connecting a mobile phone, the function of live recording inside can be realized.
  14. B.T: Long press this button to turn on/off the Bluetooth function. Click after the Bluetooth connection for the play/pause function.
  15. Switch: Used to control the power on/off.
  16. Power indicator: Displays the remaining power of the device.
  17. Product barcode: Display related information of the device;
  18. Charging interface: Charging interface: Please use the original power adapter when charging;
  19. Headphone jack : Realize the role of speaker monitoring;
  20. D.I output: Can output the music played by speaker
  21. AUX-IN: Used to access mobile audio devices such indicate that the battery is fully charged. as mobile phones or MP3;
  22. Charging indicator :The indicator light is red to indicate that it is charging; the indicator light is off to indicate that the battery is fully charged

CoolMusic-BP- MINI-Bluetooth-Amplifier-fig-2 CoolMusic-BP- MINI-Bluetooth-Amplifier-fig-1

Please follow the instructions below

If your device has a built-in battery, you should pay attention to it during long-term storage: charge it as soon as possible when the battery is low, otherwise it will reduce the battery life;

WARNING: Remind users that improper use can be dangerous or harmful
CAUTION: Remind users that improper use can cause damage or damage to items.

WARNING

  • Before using this product, please read the instructions and user manual.
  • When using, please connect to a power outlet with grounding protection.
  • Do not disassemble or modify the built-in components and wiring of this device by yourself.
  • Please use the supplied adapter or power cord.
  • Before use, make sure that the rated voltage of the equipment matches the mains voltage.
  • Inconsistent voltage will cause equipment damage.
  • Do not twist or bend the power cord excessively. This may cause a short circuit!
  • Do not share too many electrical appliances with this product. Pay special attention to all your equipment, the total power must not exceed the power that the socket can withstand.
  • When inserting the power cord plug into the socket, hold the power cord plug with your hand.
  • Please avoid the entanglement of power cord with various wires. In addition, keep away from children.
  • When your hands are wet, do not take the power cord or insert or unplug the power cord plug.
  • Before moving the device, unplug the power cord and all cables connected to the device.
  • Before cleaning the device, turn off the power and unplug the power cord from the socket.
  • If you suspect a lightning strike in your area, please unplug the power plug.

CAUTION

  1. Do not place this equipment in the following places:
  2. Places with excessive temperature
  3. Humid place
  4. Places with heavy humidity
  5. Places directly exposed to rain
  6. Dusty places
  7. Places with strong vibrations
  8. When the following situations occur, turn off the power immediately and unplug the plug:
  9.  Damaged adapter, power cord or plug
  10.  Smoke or peculiar smell occurs
  11.  The equipment is directly exposed to rain (or wet)
  12. The equipment is not operating normally or has obvious abnormalities

Electricity supply

  1. 1. Do not share the same power socket with other equipment controlled by the inverter. Otherwise, it may cause the device to malfunction or generate noise.
  2. Do not place this device next to a radio or TV.
  3. Using wireless transceivers near this device may cause interference and noise.
  4. Do not use the machine in a humid environment, otherwise, it may cause damage or malfunction of the machine.
  5. Please do not expose the machine to direct sunlight or place it next to a heat source. Too high a temperature can easily cause body deformation.

Placement

  1. Do not place this device next to a radio or TV.
  2. Using wireless transceivers near this device may cause interference and noise.
  3. Do not use the machine in a humid environment, otherwise, it may cause damage or malfunction of the machine.
  4. Please do not expose the machine to direct sunlight or place it next to a heat source. Too high a temperature can easily cause body deformation.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FAQ (Frequently Asked Questions)

Q: How do I charge the BP-MINI amplifier?

A: To charge the amplifier, use the original power adapter and connect it to the charging interface.

Q: Can I connect my mobile phone or MP3 player to the BP-MINI amplifier?

A: Yes, you can connect your mobile audio devices such as mobile phones or MP3 players using the AUX-IN interface.

Q: What does the charging indicator light indicate?

A: The charging indicator light is red when the amplifier is charging and turns off when the battery is fully charged.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals