COOLMUSIC COMP PRO Compressor Guitar Effects Pedal Instructions
- June 4, 2024
- COOLMUSIC
Table of Contents
COOLMUSIC COMP PRO Compressor Guitar Effects Pedal
Guitar Effects Pedal COMP PRO Compressor
Specifications
- Input Impedance : 1MΩ.
- Output Impedance : 1KΩ.
- Output Noise Level : <10mV.
- Weight: 200g (Bare metal).
- Power: 9V / 300mA
- DC Center :Negative.
- Dimension: 115mm(L) 66mm(W) 35mm(H).
Parts overview
POWER
This jack should use a 9V effect adapter internal negative external positive.
LEVEL
This knob is used to adjust the volume of the effector.
TONE
This knob controls the tone of the output signal.
OUTPUT
Use an audio cable to connect to the amplifier.
SUSTAIN
This knob adjusts the sustain time. Rotating this knob clockwise increases the sustain time. By rotating it counter clockwise the output level is limited.
ATTACK
This adjusts the intensity of the attack in the picking.
INPUT
Use audio cables to connect electric guitars and other musical instruments.
PEDAL SWITCH
This foot switch can switch the effector on/off.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>