bomaker S5 Wi-Fi Outdoor Projector Full HD 1080P Wireless Mirroring User Manual

Screen Mirroring
PROJECTOR S5

Wireless Screen Mirroring

For iPhone or iPad (Streaming with cellular data)

1. Select “Screen Mirroring’on the projector’s input source.
   | Input Source
   ---|---
   VGA
   HDMI
   AV
   USB1
   USB2
   Screen Mirroring
   SETTING

2. Go to Settings, connect iPhone or iPad to the projector WIFI named “Mirroring-XXXXXxX”, enter password: 12345678

3. Turn on the Screen Mirroring settings in the control center by scrolling down the phone, choose “Mirroring-xXXXXX”” and connect

4. Once connected, your mobile device’s screen will be displayed on the projection surface.

For iPhone or iPad (Streaming with WiFi)

1. Select “Screen Mirroring”’on the projector’s input source.
   | Input Source
   ---|---
   VGA
   HDMI
   AV
   USB1
   USB2
   Screen Mirroring
   SETTING

2. Connect iPhone or iPad to the projector WIFI
   *WI-Fi Name: Mirroring-XXXXXxX, Password: 12345678

3. Connect the projector with router WiFi via iOS mobile device.
   • Open browser and enter the number: 192.168.49.1 on the IP address.
   • Select WiFi AP > Scan.
   • Select Scan and find the WiFi sent by the router, enter password and connect.
   • Please wait for 10 seconds. The router ID and WiFi name will appear on the top right hand side of the projector interface once connected

4. Connect the iOS mobile device to the same router WiFi CAt this time, the iOS mobile device and the projector are connected under the same WiFi).

5. Find the in-screen feature option for 1|OS mobile devices, click and search for projector device.

6. When the projector and the device picture are consistent, Screen Mirroring is successful.

For Android phone or tablet

1. Select “Screen Mirroring” on the projector’s input source.
   | Input Source
   ---|---
   VGA
   HDMI
   AV
   USB1
   USB2
   Screen Mirroring
   SETTING

2. Connect Android device to the projector WIFI
   *WI-Fi Name: Mirroring-xXXXXXX, Password: 12345678

3. Turn on the Wireless projection settings on your phone.

4. Choose “Mirroring-XXXXXX” and connect.

5. Once connected, your mobile device’s screen will be displayed on the projection surface.

6. Once Screen Mirroring successfully, for Android devices it will consume Mobile Data to stream Movies; If you need to use the routed WiFi for playback, please switch the Android mobile device to the routed WiFi.

For Windows 10 PC

1. Select “Screen Mirroring” on the projector’s inout source.
   | Input Source
   ---|---
   VGA
   HDMI
   AV
   USB1
   USB2
   Screen Mirroring
   SETTING

2. Connect your Windows PC to the WiFi from the projector
   *Wi-Fi Name: Mirroring-XXXXXX, Password: 12345678

3. Use the shortcut keyg P to enter the projection settings, select Duplicate, click Connected to a wireless display to enter the device search.

4. Select projector: Mirroring-XXXXxXxX, click and connect it.

5. The Wireless Screen Mirroring will be successful when the projector’s screen display is the same as the device.

For Macbook

1. Select “Screen Mirroring” on the projector’s inout source.
   | Input Source
   ---|---
   VGA
   HDMI
   AV
   USB1
   USB2
   Screen Mirroring
   SETTING

2. Connect the MacBook to the projector WIFi named
   “Mirroring-xXXXXXX”, enter password: 12345678.

3. Turn on the “Setting” ana find “Airplay”, then click and search for the projector.

4. Select projector: Mirroring-XXXXxXxX, click and connect it.

5. The Wired Screen Mirroring will be successful when the projector’s screen display is the same as the device.
   Reset
   If something goes wrong, you can do a factory reset by long pressing (10S) the P|] button and try to connect again.

Wired Screen Mirroring

Only For iOS device

1. Select “Screen Mirroring” on the projector’s inout source.
   | Input Source
   ---|---
   VGA
   HDMI
   AV
   USB1
   USB2
   Screen Mirroring
   SETTING

2. Connect your iOS device via USB Port 2.

3. For the first time use, there has a window pops up on your iOS device, click “Trust” and input the correct password.

4. When the projector and the device picture are consistent, Screen Mirroring is successful.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different
  from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Radiation exposure statementy this equipment compliance with FCC radiation exposure limits set forth for anuncontrolled environmenty this equipment should be installed and operated and operated with minimum distance 20cm between the radiator and your body

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>