bomaker C9 Projector User Manual

bomaker C9 Projector

Important Safety Instructions

Thank you for purchasing the Bomaker C9 projector. Please read this manual thoroughly before using it and keep it for future reference. If physical injury, loss of data, or damage is caused by failure to follow instructions, the warranty does not apply.

Setup

1. Do not install the projector in places without proper ventilation.
2. Do not install the projector in hot and humid places.
3. Do not install the projector in dusty or smokey places.
4. Do not block the ventilation holes (intake or exhaust).
5. Do not install the projector near the temperature and smoke detectors.It may cause a sensor failure.
6. Do not install the projector in areas where warm and cool air will blow directly onto the projector, otherwise, it may cause projector failure due to moisture condensation or large temperature changes.

Power Supply

1. Power off the device before removing the power supply from the socket.
2. Use the power cord with caution to avoid unduly bending it. Damaged power cords may cause electric shock or fire.
3. Unplug this device if there are lightning storms or when unused for a long time.
4. Never touch the power cable or the power connection with wet hands.
5. Unplug the power cord from the outlet after using the projector.

Repairs

1. Never make any repairs to the projector yourself.
2. No components in the projector can be repaired by customers.
3. Please entrust qualified professional maintenance personnel for repair.

Caution

1. Do not look at the lens or it may cause severe eye injury.
2. During and after use, the temperature near the outlet will rise.
   Therefore touching it may cause burns.

Packing List

Overview

Remote Control

Getting Started

Projector Placement

Please leave at least a 30cm gap from the walls to maintain adequate ventilation ensuring the projector’s performance and reliability.

Projector Distance & Size

The recommended projection screen is around 80 inches with a projection distance of around 7.8 ft. Ambient darkness will improve the clarity of the projected images.

Projector Connections

Start Using

1. Power On

   • Plug the power cord into an outlet.
   • Take off the lens cover.
   • Press the power button to turn on the projector.

2. Adjusting the projected image
   Adjust the keystone and focus ring to get the best image performance.

3. Switch Input Source
   Press Son the projector or remote to enter the interface of Input Source.
   

4. Play a Video / Music / Photo / Text
   When selecting a USB disk connection, you need to manually select the corresponding file for playback.

Specifications

Trouble Shooting

If the method below can’t solve your problem, please contact support@bomaker.com, and our technicians will assist you in solving your problem.

• How to get the best movie-viewing experience?
  • Choose a dark environment.
  • Place the pro
  • The recommended viewing size and distance are 80″ and 7.8 ft.
• What to do if there is no image?
  • Check if the input source is correct.
  • Check if the cable is connected properly and try to re-connect the cable.
  • Replace the connecting cable.
• The image is blurry, what should I do?
  • Make sure the projection distance is farther than the minimum projection distance of 1.5 m.
  • Adjust the projector’s Keystone Correction Ring /Focusing Ring.
• What to do if the screen mirroring fails?
  • Make sure the projector’s input source is Screen Mirroring.
  • Press and hold on “OK” key 10s to reset the projector and try again.

CONTACT

• EMAIL: support@Bomaker.com
• WEBB: www.Bomaker.com
• @BomakerOffcial

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>