hama DR1001BT Digital Radio Instruction Manual

hama DR1001BT Digital Radio

Product Information

• Product Name: 23054296 (DR1001BT) Digital Radio
• Description: This digital radio is designed to provide high-quality audio and convenient features for radio playback. It has various connectivity options, including a headphone jack, line out, USB-C socket, and BluetoothTM. The radio also comes with an antenna for receiving DAB/FM signals.
• Safety Instructions: Please read the safety instructions before using the product. They provide important information to ensure safe operation.

Product Usage Instructions

Setting up the Radio and Accessories:

Rear View:

• Mains connection: Connect the enclosed mains adapter to the power supply.
• Headphone jack (3.5 mm): Connect wired headphones with a 3.5 mm jack connection.
• Line Out (3.5mm): Connect external loudspeakers and other audio devices via a 3.5 mm audio cable.
• USB-C socket : Use for software updates only, not for playback via USB.
• Antenna: Use for receiving DAB/FM signals.

Front View:

• Favourites buttons 1-4: Use these buttons to store and recall your favorite stations.
• On/Off switch: Turn the radio on or off.
• RADIO button: Press to start radio playback.
• Automatic station search button: Automatically search for available stations.
• Call up station list button : Access the list of available stations.
• Call up alarm settings button : Access the alarm settings.
• BluetoothTM button: Use Bluetooth to connect and play audio from compatible devices.
• Navigation/OK/Volume button: Use the rotary controller for navigation and press the OK button to confirm selections. Adjust the volume using the same button.
• Display: Shows information and settings.

Operating Concept

General Operation:

• Press the On/Off button to turn on the radio.
• Use the rotary controller for navigation and press the OK button to confirm selections.
• Press the RADIO button to start radio playback.
• Press the Automatic station search button to search for available stations.
• Press the Call up station list button to access the list of available stations.
• Press the Call up alarm settings button to access the alarm settings.

Managing Favourites:
Use the [PRESET 1], [PRESET 2], [PRESET 3], and [PRESET 4] buttons to store and recall your favorite stations.

Setup:
Connecting and Operating the Radio:

1. Connect the product to mains power.
2. Wait for the radio to start up.

Introduction

Thank you for choosing a Hama product. Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.\

explanation of warning symbols and notes

• Risk of electric shock
  This symbol indicates a risk of electric shock from touching uninsulated product parts that may carry hazardous voltage.

• Warning
  This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

• note
  This symbol is used to indicate additional information or important notes.

Package contents

• DR1001BT digital radio
• Power supply unit (12V/1A)
• Operating instructions

Safety Instructions

Safety instructions

• The product is intended for private, non-commercial use only.
• Do not use the product in areas in which electronic products are not permitted.
• Protect the product from dirt, moisture and overheating and use it in dry rooms only.
• As with all electrical products, this device should be kept out of the reach of children.
• Do not drop the product and do not expose it to any major shocks.
• Do not operate the product outside the power limits given in the specifications.
• Keep the packaging material out of the reach of children due to the risk of suffocation.
• Dispose of packaging material immediately in accordance with the locally applicable regulations.
• Do not modify the device in any way. Doing so voids the warranty.
• Use the product only for the intended purpose.
• Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
• Do not use the product in a damp environment and avoid splashing water.
• Only use the article under moderate climatic conditions.
• The battery is integrated and cannot be removed.
• Do not open the device or continue to operate it if it becomes damaged.
• Do not incinerate the battery or the product.
• Do not tamper with or damage/heat/disassemble the batteries/rechargeable batteries.

Risk of electric shock

• Do not open the device or continue to operate it if it becomes damaged.
• Do not use the product if the AC adapter, adapter cable or power cable is damaged.
• Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.

Warning

• High sound pressure!
• There is a risk of hearing damage.
• To prevent any loss of hearing, avoid listening at loud volumes for prolonged periods.
• Always keep the volume at a reasonable level. Loud volumes can damage hearing – even over short periods.
• Using this product limits your perception of ambient noise. For this reason, do not operate any vehicles or machines while using this product.

Information and notes before getting started

note – optimising reception

• Please note:
  • Always pull the antenna out completely.
  • We recommend you adjust the antenna vertically to ensure optimal reception.
• Try various different positions if necessary to get the best reception.

Setting up the radio and accessories

Rear view

power supply
2| Headphone jack (3.5 mm)| Analogue connection with wired headphones with a 3.5 mm jack connection
3| Line Out (3.5mm)| Analogue connection with external loudspeakers and other audio devices via a 3.5 mm audio cable
4| USB-C socket| Only for software updates, no playback option via USB
5| Antenna| Antenna for receiving DAB/FM signals

front view

operating concept

General operation

Symbol| Designation

**** Hand symbol

| function
---|---|---
Press once
| Hand symbol| Press multiple times
| Hand symbol| Press repeatedly
**| Hand symbol| Hold for 3 seconds
Designation**

Rotary controller Navigation

| function
---|---

• Navigation forwards in the current menu
• Navigation backwards in the current menu
• Reduces the volume of the current playback
• Increases the volume of the current playback

Rotary controller [oK] button| Confirmation button for opening the menu or function currently highlighted
On/Off button|

• Switching the radio on and off
• Long button press (approx. 5 seconds): Opens the Settings menu

Radio button|

• Changes the contents shown in the station information
• Long button press (approx. 3 seconds): Changes to FM mode
• Open menus are closed and the radio returns to the playback screen

Automatic station search|

• Long button press (approx. 3 seconds): Automatic station search
• *Change station

Call up station list| Opens the station list (DAB/DAB+)
Alarm button|

• Opens the alarm settings
• Long button press: Activates/deactivates alarm 1

Bluetooth®| Pair a new device

Managing favourites

button

1

| Designation

**[PReSeT 1]** button

| function
---|---|---

• Short button press: Access favourite storage space 1 for current playback mode
• long button press: Save the current station to favourite storage space 1

2| [PReSeT 2] button|

• Short button press: Access favourite storage space 2 for current playback mode
• long button press: Save the current station to favourite storage space 2

**| |
4| [PReSeT 4]** button|

• Short button press: Access favourite storage space 4 for current playback mode
• long button press: Save the current station to favourite storage space 4

Setup

Connecting and operating the radio

Warning

• Only operate the product from an approved socket that is connected to the public power supply. The socket must be installed close to the product and must be easily accessible.
• Disconnect the product from the power supply using the On/Off switch – if this is not available, unplug the power cord from the socket.
• If using a multi-socket power strip, make sure that the total power consumption of all connected devices does not exceed the socket strip’s maximum throughput rating.
• If you will not be using the product for a prolonged period, disconnect it from mains power.
• Connect the mains cable to a properly installed and easily accessible mains socket.
• The power supply unit is suitable for mains voltages between 100 and 240 V and can therefore be used on virtually any AC power grid. Please note that a country-specific adapter may be necessary.
• You can find an appropriate selection of Hama products at www.hama.com
• Once the product has been connected to mains power, initialisation takes place. The radio starts up.

Navigation and controls

Once the radio has been initialised for the first time, switch it on using the button (Power button) if required to start the product setup process. The relevant steps are explained in brief below. Further information can be found in the relevant detailed sections “(13. System settings)”.

1. Control options
   Please see the operating concept for information on the radio’s general operation. The radio can be used with the following control options:

2. Control elements on the device

3. Time settings
   The radio allows the time to be displayed in 12-hour (am/pm) or 24-hour format.

4. Screen display
   Three different presentations of the display content are supported. Here, you can switch between complete text display, image and text display and full image with subtitles.

5. Managing favourites
   To save the station currently playing as a favourite, press any favourites button for 3 seconds. With a brief press on a favourites button, you can reselect any previously saved favourite.

Dab radio

• This radio receives all common digital radio frequencies in the range of 174 MHz to 240 MHz (band III, channels 5A to 13F). The automatic DAB station search starts automatically when DAB mode is started for the first time. As soon as this has been completed, the current station list is displayed.
• Pressing one of the buttons allows you to access the following.

Station list

• The station list offers a complete display of all radio stations that were found during the last complete search.
• Navigate to the desired station you want to call up and confirm this selection. The radio will now start playing the corresponding station.
• For stations that are currently no longer available, a ? appears at the front.

full scan
If the location of the radio changes or if new stations can be received, it is advisable to perform the station search again. The entire frequency range is searched again and the station list is updated.

FM radio

• If any of the stations you are looking for is not available on DAB, you can still listen to the station on FM. To set FM reception, press and hold [RaDIo] (6) for around 5 seconds.

• The FM station setting option appears, which you can operate using the controller. Turning the controller slowly adjusts the frequency in steps of 0.05 MHz.
  Turn the controller faster to adjust the frequency in steps of 0.5 MHz.

• Once you have found the station you want, confirm by the setting by pressing the rotary controller.

• The display shows “FM” in the first line to indicate the reception of FM radio.
  The set frequency can also be assigned to a shortcut button (see 11).

• If you wish to adjust the frequency, press the rotary controller (11) again to activate the frequency setting.

Bluetooth streaming

This radio has a Bluetooth® receiver which allows you to transfer audio content to the radio. The transmitting device, for example a smartphone, is connected to the radio for this purpose and the audio content is transmitted directly to the radio. To do this, activate Bluetooth® playback mode.

Music playback via bluetooth®
As soon as your source device, for example a smartphone, is connected to the radio, start playback on the source device.
The radio now plays back the content. The volume can be changed directly via the radio, but note that the volume must also be adjusted on the source device.

further settings – bluetooth® receiver
You can pair your terminal devices with the radio using Bluetooth® and use this as a playback device. You can control playback directly on the terminal device. You can adjust the volume on the radio, as well.

Pair a new device
The radio’s mode is changed to Bluetooth playback and the radio is immediately in “Pairing” mode. This means that the radio is visible to other devices and you can connect via your smartphone/tablet or other source device. After a successful connection, you can start playback via the source device.

alarm clock

The radio has two individually adjustable alarm times.

Settings
Alarm 1 and Alarm 2 are configured identically and allow two separate alarm times to be saved.
Press [alaRM] (9) to open the Settings menu. Select Alarm 1 or 2 using the rotary controller (11). Confirm your selection by pressing rotary controller (11).

1. Step 1
   Turning the rotary controller (11) allows you to switch between “ON” (alarm active) and “OFF”) (alarm inactive). If you select “OFF”, the setup process is terminated and you are taken back to the alarm menu’s start screen

2. Step 2
   Turn the rotary controller to select the time in hours. Confirm the selection by pressing the rotary controller (11). Next, repeat the setting process to configure the alarm time in minutes.

3. Step 3
   Now select which days the alarm is to be active on. The following options are available for this:

4. Daily The alarm is active from Monday to Sunday

5. Once The alarm is only active once, i.e. as soon as the set alarm time next arrives.

6. Mon – Fri à The alarm is active from Monday to Friday

7.  Sat – Sun à The alarm is active from Saturday to Sunday

8. Select days à This selection takes you to a drop-down menu in which you can choose the required day (Monday to Sunday). Once a day is selected, this is indicated by a symbol (√)

9. Step 4
   Now choose whether you wish to be woken by an alarm (Sound) or the radio (Radio). If you choose Radio, you can select from Favourites 1 and 2 that are saved on the shortcut buttons.

10. Step 5
    You can set the volume at which the alarm sound should be played. This setting makes it irrelevant how loud you last listened to the radio.

11. Step 6
    Now select the alarm duration.

note The [alaRM] button (9) takes you back to the previous step.

The alarm setting process is now complete. As soon as the alarm goes off, you can activate the snooze function by pressing the rotary controller button. Repeatedly pressing the rotary controller (11) allows you to change the snooze time. [alaRM] (9) disables the alarm.

note

• You can activate and deactivate alarm 1 again by pressing and holding [alaRM] (9). This shortcut function also works if the radio is in standby mode.
• If the alarm is active, the alarm symbol appears on the left next to the time. If the radio is switched off, the alarm symbol is displayed on the left next to the date.
• The symbol for alarm 2 appears on the right-hand side accordingly. Alarm 2 cannot be activated via a shortcut button.

System settings

To access the system settings, ensure that the radio is switched on. Then hold the ON/OFF button down for 5 seconds.

• Standby screen
  Select a brightness setting for the display that is to be used in standby mode.

• Time settings
  The radio allows the time to be displayed in 12-hour (am/pm) or 24-hour format.

• Screen display
  Three different presentations of the display content are supported. Here, you can switch between complete text display, image and text display and full image with subtitles.

• language selection
  One of the available system languages can be selected here.

• SW version
  The radio’s current software version is displayed.

• factory settings
  This function allows you to reset your radio to the factory settings on the software side. Confirm the prompt with “yeS” to start the process.

note
Resetting to the factory default settings can remedy some problems and malfunctions.
However, all settings made previously, such as equalizer presets, station presets and network profiles, will be permanently deleted.

Care and maintenance

• Only clean this product using a lint-free, slightly damp cloth and do not use any harsh cleaners.
• If you do not plan to use the product for a prolonged period, turn off the device and disconnect it from the power supply. Store it in a clean, dry place away from direct sunlight.

Warranty disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Declaration of conformity

Hama GmbH & Co KG hereby declares that the radio equipment type [23054296, 23054297] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: www.hama.com -> 23054296 -> Downloads

Technical data

Technical data

Display| 4.3″ (10.92 cm) TFT
loudspeaker| Full-range loudspeaker (5W RMS)
Power supply| 12.0 V     1.0 A 12.0 W
languages supported| German, Dutch, French, English
Packaging contents| Digital radio, power supply unit, operating instructions
Connectivity

bluetooth ®| receiver (RX): V5.0, class 2, A2DP, AVRCP
audio connections

Inputs| AUX in 3.5mm
outputs| Headphone 3.5 mm
Sources| | favourites
---|---|---
Dab/Dab+ (174,928 – 239.2 MHz)| ü| 4
fM (87.5 – 108 MHz)| ü

Specifications according to Regulation (eu) 2019/1782

Specifications according to Regulation (eu) 2019/1782

brand name, commercial register number, address| Hama, HRA12159, Dresdner Str. 9, 86653 Monheim, Germany
Model identifier| K12S120100G
Input voltage| 100 – 240 V
Input aC frequency| 50 / 60 Hz
output voltage / output current / output power| 12.0 V DC / 1.0 A / 12.0 W
average efficiency during operation| 83.3%
efficiency at low load (10%)| 79.7%
Power consumption at zero load| 0.05W

• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Hama GmbH & Co KG is under license. Other trademarks and trade names are those of their respective owners.
• All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.

Hama GmbH & Co KG 86652 Monheim / Germany
Service & Support www.hama.com
+49 9091 502-0

References

• hama.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>