UNiKA SPT-3RT Stage Series Phase Tester User Manual
- June 6, 2024
- UNiKA
Table of Contents
UNiKA SPT-3RT Stage Series Phase Tester
SPT-3rt is the best tools of UNiKA Stage Series. This tool is suitable for any speaker manufacturer, touring and fixed installation applications. It can be used for testing phase either the speaker or balance cable. An external microphone input socket can be connected external dynamic microphone to test the speakers that have been hung up. By using neodymium magnet to combine transmitter and receiver units for easy carrying.
Features
- Detect the phase accuracy in any audio system, prevent the musical signal from cancellation due to the opposite phase.
- Detect the XLR signal cable to prevent it from contact fail, brokerage or opposite connection.
- Built-in external microphone input socket in order to use for the harder environment such as the hanging speaker cluster.
- Testable range from 10 cm to 3 meters. An ideal environment can be tested far away from the axis of speaker for 7 meters.
Functions Instruction
SPT-3t Transmitter
- Buzzer to generate pulse tone.
- Neodymium magnet to combine SPT-3r receiver.
- HOT PIN selector, select test pin of XLR cable either pin-2 or pin-3.
- Linear pot to tune pulse tone level.
- Release screw to open battery cabinet. Recommend to use 9V PP3 Alkaline battery.
- Neodymium magnet to combine SPT-3r receiver.
- Male XLR connector to connect balance cable to send pulse tone to mixer.
- Power and pulse tone indicator.
- Power switch.
SPT-3r Receiver
- Omni direction microphone.
- Red color out phase indicator.
- Green color in phase indicator.
- Input selector, select test sources and applications from built-in Mic/Cable test/EXT MIC etc.
- HOT PIN selector, select test pin of XLR cable either pin-2 or pin-3.
- Release screw to open battery cabinet. Recommend to use 9V PP3 Alkaline battery.
- Neodymium magnet to combine SPT-3t transmitter.
- Female XLR connector to connect an external dynamic microphone.
- Neodymium magnet to combine SPT-3t transmitter.
- Blue color power indicator.
- Power switch.
Operational Guidance
Phase tester – Test XLR cable
Test speaker’s phase by built-in MIC
Test speaker’s phase by EXT. MIC
Notes
- Avoid direct sun light and damp working environment.
- The unit is designed to operate between 0°~55°C (32°~122°F) and in an atmosphere of relative humidity up to 80%.
- Recommend to use 9V PP3 Alkaline battery.
info@unikapro.com
If you still need further clarification, please send email to us and we will
do our very best to reply you in short order.
Specification
The following information is subject to change without notice.
TRANSMITTER
Signal type| Pulse tone from buzzer
Frequency spectrum, electrical| 1Hz to 20KHz
Frequency spectrum, acoustic| 200Hz to 5KHz
Output level, electrical| 0 to 1V (Acoustic level is fixed)
Output load impedance| >1KΩ
Output source impedance| 1KΩ
Power supply| 9V PP3 Alkaline battery (approx. 50 hours)
Power consumption| 10mA
RECEIVER
Frequency spectrum, electrical| 1Hz to 20KHz
Frequency spectrum, acoustic| 10Hz to 1KHz
Input impedance (Mic)| 1KΩ
Input impedance (Line)| 10KΩ
Input level (Mic)| 10mV – 1V
Input level (Line)| 0.5V to 50V
Output level| 0V to 1V
Power supply| 9V PP3 Alkaline battery (approx. 50 hours)
Power consumption| 10mA
PHYSICAL CHARACTERISTICS (whole set)
Dimensions/Shipping dimensions ( W x D x H )| 120 X 95 X 56 mm
20pcs packs dimensions ( W x D x H )| 245 X 195 X 117 mm
Weight/Shipping weight| 0.4 Kg / 0.45kg
20pcs packs shipping weight| 10.0 Kg
Operating temperature| 0°~50°C
Storage temperature| -30°~+75°C
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>