Bomaker Bluetooth Wireless Earphone, IPX7 Waterproof Earbuds-Complete Features/Instruction Guide

Bomaker Bluetooth Wireless Earphone, IPX7 Waterproof Earbuds

Specifications

• Product Dimensions (L x W x H)
  3.80 x 3.80 x 1.50 Inches

• Active Noise-Cancellation
  Yes

• Volume Control
  Yes

• Sensitivity
  35dB

• Connectivity Technology
  Wireless

• Impedance Range
  up to 32 Ω

• Bluetooth Version
  5.0

• Waterproof
  Yes

• Charging Method
  Charging case

• Brand
  BOMAKER

Introduction

Bomaker Bluetooth 5.0 in-Ear Stereo Headphones, 30Hrs/2 Mics, Touch Control, Type-c Quick Charge, IPX7 Waterproof Sports Headset for iPhone/Android. Gemstone drivers and superior magnetic induction technology produce rich, sparkling music with precise highs and powerful bass, extending a broader soundstage and outstanding accuracy. Concentration boosts power, so enjoy immersive sound in your home office, on your commute, or at the gym. Ideal for use in home offices. Nature’s middle frequency and sharp highs are aided with a PEEK composite 6 diaphragm, 6mm graphene driver. The two dedicated microphones with DSP noise cancellation keep up to 95% of your voice for clear conversations.

The most recent Bluetooth 5.0 chip, with a fine-tuned LDS antenna system to increase radio frequency performance even more. It reduces signal interference so that the transmission is more steady and powerful. When watching a video or making a call, there are no difficulties with lipsync.

How do I connect/pair?

To iOS and Android phones

1. When you remove both earphones from the charging case, they will power on automatically and a red and white light will begin flashing, indicating that they are ready to link with any device.
2. Navigate to the Bluetooth options.
3. Choose “S If prompted for a password, input “0000.”
4. The pairing will then be completed.

To PC (Windows)

• Step 1: Enable Bluetooth on Windows.
• Step 2: Go to the options menu.
• Step 3: Select “Bluetooth and other devices” from the drop-down menu.
• Step 4: Select “Add device” from the drop-down menu.
• Step 5: Select Bluetooth from the menu.
• Step 6: Remove both earbuds from the charging case; they will switch on automatically and flash a red and white light, indicating that they are ready to pair with any device.
• Step 7: Choose “Sifi II.” If prompted for a password, input “0000.”
• Step 8: The pairing will then be completed.

What Should I Wear?

• Step 1: Select the ear tips that best fit your ears.
• Step 2: Separate the right and left earphones.
• Step 3: Insert the earphones into the ear and shake your head to ensure that they are secure.
• Step 4: To improve your calling experience, move the mic closer to your mouth.

How Do I Turn On Mono Mode?

Simply link the earphones with any smartphone and then slip one of them into the charging case to enable the mono mode on the Bomaker Sifi II. The other will begin to operate on its own, and a white light will illuminate.

How Do I Turn On And Off?

Automatically

• Remove the earphones from the charging case and turn them on. They will turn on by themselves.
• Turn the earphones off and place them in the charging case. They will switch off on their own.

Manually

• To turn the earphones on manually, press and hold the touch button on either of them for 2 second
• To activate the earbuds, press and hold the touch button on either of them for 5 seconds.

Instructions on how to control/operate?

• Pause and play music Once on either of the earbuds, press the touch button.
• Play the following song Double-tap the touch button on the right earbud.
• Press the touch button on the left earbud twice to play the previous song.
• Press and hold the touch button on the right earpiece for 1.5 seconds to increase the volume.
• Reduce the volume by 1.5 seconds by pressing and holding the touch button on the left earbud.
• To answer an incoming call, press either of the earbuds’ touch buttons once.
• To end a call, press either of the earbuds’ touch buttons once.
• Refuse incoming calls For 1 second, press and hold the touch button on any of the earphones.
• Press and hold the touch button on any of the earphones for 3 seconds to activate the Voice Assistant.

Charge Methods

Earbuds

All you have to do to charge the earphones is place them in the charging case and close the top. The earbuds will begin charging on their own.

Charging case
All you have to do to charge the charging case is put a 5V USB Type-C cable into the charging case’s socket. It will begin charging on its own.

Status of LED Lights

Earbuds

• Earbuds in mono mode with white light on.
• Earbuds are resetting when the red and white light flashes three times.
• Earbuds are ready to pair when the red and white light flashes.

Case

• One light flashing: The battery in the case is less than 25% charged.
• The case has 25% to 50% battery life with one light on and one flashing.
• Two lights are on and one is flashing, indicating that the case is between 50 and 75 percent charged.
• Three lights are turned on, with one flashing: More than 75% of the battery is in the case.

How to Reset?

1. Step 1:Place both earbuds in the charging case in step one.
2. Step 2: For a few seconds, press and hold the touch button on both earphones until a red and white light flashes three times.
3. Step 3: Once the resetting is complete, you may connect it to any device.

Frequently Asked Questions

• Is Bomakeris completely waterproof?
  The Bomaker has an IPX7 water-resistant designation, which means it is protected not only from water, but also from the consequences of immersion.

• Is Bomaker equipped with a microphone?
  Yes, the Bomaker includes a built-in microphone.

• What is Bomaker’s latency?
  The Bomaker has a 250ms latency.

• How can I tell when my Bomaker is completely charged?
  The Bomaker takes around 90 minutes to charge, so they should be fully charged after that.

• Is it possible to swim with IPX7 earbuds?
  You wouldn’t want to go lower an IPX7 grade for swimming earphones unless you want to risk major harm. Your earphones will stay safe in three feet of water for up to 30 minutes if they have an IPX7 rating. If you’re going to be submerged for an extended period of time, you’ll want to invest in IPX9-rated gadgets.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>