Dongguan Jiajiatong Plastic Mould JJT-A06 Multi-Function Wireless Charger User Manual

Dongguan Jiajiatong Plastic Mould JJT-A06 Multi-Function Wireless Charger

Thank you for your purchase of our products, this product is a smart phone wireless charger, allowing you to easily experience the fun of digital products. Please read this user manual carefully before using this product and keep it properly for reference.

Schematic diagram

Parameter specification

• INPUT VOLTAGE: 9v/3a 12V/2.5
• Aairpods output: 1-3w
• USB OUTPUT: 5V 2A
• Frequency: 110-205KHZ
• net weight: 420g
• DUAL COIL WIRELESS CHARGING OUTPUT: 5W, 7.5 W, 10W, 15w
• Led power: 2W
• MATERIAL: ABS + PC
• Product Size: 228 142 23.5 mm

Charging mode

Compatibility

• IPHONE:iPhone 13/13 Pro/13 Pro Max/12/12 Pro/12 Pro Max/11/11 Pro/11 Pro Max/Xs/Max/Xr/X/8/8 Plus
• Samsung：Galaxy S20/S20+ /S20 Ultra/S 10/S10+/S9/S9+/S8/S8+/S7/S7 edge/S6 edge Plus/Note 10/9/8/7/5
• Any phone that supports Qi wireless charging。

Points to note

Please pay attention to the following issues, otherwise it may lead to abnormal charging, high charging temperature, intermit-tent charging, or even non-charging.

1. Use QC2.0/3.0 quick charger adapter (9v/3a) for better charging performance. 5v/1a adapters are not supported.
2. This product supports the QC and PD protocols.
3. Touch the switch button, click on the light to turn on/off, and switch the light level.
4. For wireless charging, there should be no metal or magnetic objects within a distance of 4cm from the center point on the back of the phone.
5. The lower the temperature, the faster the charge. Charging speed is faster in winter than in summer.
6. Please do not charge in the hot and humid environment to avoid circuit damage.
7. Please keep it out of the reach of children to avoid unneces-sary accidents.

Configuration list
Wireless Charger, charging cable, user manual The instruction and pictures are the sketch map, the final product is subject to the physical object.

FCC Requirement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:

1.  this device may not cause harmful interference,and
2. this device must accept any interference received,including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses,and can radiate radio frequency energy,and if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not occur in aparticular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>