anslut 014833 RGB-WW Standard Bulb LED Instruction Manual
- June 6, 2024
- anslut
Table of Contents
Item no. 014833
RGB/WW STANDARD BULB LED
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for
future reference.
(Translation of the original instructions)
Care for the environment!
Must not be discarded with household waste! This product contains electrical
or electronic components that should be recycled. Leave the product for
recycling at the designated station e.g. the local authority’s recycling
station.
Jula reserves the right to make changes. In the event of problems, please
contact our customer service.
www.jula.com
Manufacturer
Jula AB, Box 363, 532 24 SKARA
Distributor
Jula Poland Sp. z o.o., ul.
Malborska 49, 03-286 Warszawa, Polska
Jula Norge AS, Solheimsveien 30,
1473 LØRENSKOG
For latest version of operating instructions, see www.jula.com
2021-01-28
© Jula AB
SAFETY INSTRUCTIONS
- The product must not be connected to a dimmer circuit.
- The product can only be dimmed with the remote control.
- For Indoor use only.
- The product must only be used in a dry room.
- The product must only be used with the supplied remote control.
- The product is only intended for decorative lighting and is not suitable for room lighting.
- For light sources that are a lot heavier than the light sources they are replacing the greater weight can adversely affect the mechanical stability of some lights and fittings and can result in inferior contact and that the light source is less firmly attached.
SYMBOLS
| Read the
instructions.
---|---
| Only dimmable with the remote control.
| Must only be used in a dry room.
| Approved in accordance with the relevant directives.
| Recycle end-of-life product in accordance with local regulations.
TECHNICAL DATA
Rated voltage|
230 V ~ 50 Hz
---|---
Power consumption|
9 W
Socket|
E27
Luminous flux|
806 lm
Energy efficiency class|
A+
Life span|
25000 h
Max number of cycles on/off|
12500
Time for light source to reach 60% of brightness|
<1 s
Start time|
< 0.5 s
Colour temperature|
2700 K + RGB
Size|
114 mm x, Ø60 mm
Ambient temperature|
-40 to 40°C
Range remote control|
3 m
Dimmer function*, integrated|
5 stage
*Only with remote control
DESCRIPTION
- Off
- On
- Adjusting the brightness (5 stage)
- 42 colours that change in repeated cycle (manually)
- White light
- 15 colours that change immediately or gradually in automatically repeated cycle
- Colour display
FIG. 1
HOW TO USE
NOTE:
When the light source has been switched off it always starts in automatic colour changing mode.
| Button off/on.
---|---
| Dimmer function. Press the left button to reduce the brightness. Press the
right button to increase the brightness.
| Manual control. Press the button to change colour manually. 15 colours that
change gradually in a pre-programmed sequence.
| Button for cold white light.
| Automatic mode. Press the button to activate automatic colour changing with
15 colours that change immediately or gradually in automatically repeated
cycle.
| Press the button opposite the same column to gradually change colour to the
colour of the button that is pressed.
| Press a button to show the colour.
MAINTENANCE
REPLACING THE BATTERY
FIG. 2-5
Documents / Resources
|
anslut 014833 RGB-WW Standard Bulb
LED
[pdf] Instruction Manual
014833, RGB-WW Standard Bulb LED
---|---
|
anslut 014833 RGB-WW Standard Bulb
LED
[pdf] Instruction Manual
014833 RGB-WW Standard Bulb LED, 014833, RGB-WW Standard Bulb LED, Bulb LED
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>