Allison Offline Authentication USB Dongle Instructions
- June 8, 2024
- Allison
Table of Contents
Allison Offline Authentication USB Dongle
Allison Offline Authentication USB Dongle
Setup Guide
The purpose of the Allison Offline Authentication USB Dongle is to allow
Allison DOC® and TCM Reflash to authenticate with the 6th Gen TCM when an
active internet connection is not available (offline) or has a low grade/poor
quality connection. The Allison Offline Authentication USB Dongle is not
required when online and logged into Allison DOC® with an Allison HUB user ID
or Allison TCM Reflash user ID.
Note: Allison OEM VCP users should refer to the VCP User Guide for
information. The VCP User Guide is located on Allison HUB under the
Engineering > VEPS Tools menu.
While the Allison Offline Authentication USB Dongle is intended for offline
use, an active internet connection and an Allison HUB account or TCM Reflash
account are required to activate and provision the dongle for the first time.
To request an Allison HUB account visit
https://hub.allisontransmission.com/.
NOTE: Due to the small size of the USB, it is recommended to attach the USB dongle to a lanyard.
To use your new USB dongle for the first time:
-
Insert USB dongle to PC’s USB port and ensure the white LED illuminates. If it does not, remove and reinsert the USB dongle.
- Open Allison DOC® or TCM Reflash
- From Allison DOC®, go to the “Help” menu and select “Allison Security (6th Gen)”, then select the “Advanced” button.
- From TCM Reflash, select the 6th Gen Database and then select the link in the lower corner.
-
Click the “New USB” tab.
-
Enter your Pin in the “New Pin” and “Confirm Pin” boxes. Click the “Change Pin” button.
-
Indicate whether the credentials are for TCM Reflash or the Allison HUB by selecting the radio button.
-
Click Provision USB Dongle
-
A success message should appear and signs indicator is updated. This functionality ails if a new/reset USB dongle is not detected. The #signs are the number of 6th Gen TCM ‘unlocks’ allowed. When the #signs are low, reprovision Allison Certificates on an existing USB dongle:
-
Insert USB dongle to PC’s USB port
-
Access Allison Certificates dialog. Go to the
“Online Access” tab. -
Indicate whether the credentials are for TCM Reflash or the Allison HUB by selecting the radio button.
- Enter Username and Password
-
Enter the USB dongle’s PIN
-
Clicking the “Provision USB Dongle” button.
-
A success message will display after approximately one minute.
For support, please contact:
DOCsupport@noregon.com | U.S. and Canada Toll
Free: 877-659-6913 | International:
1-336-970-5534
SG-ALLISON-2021-03-100421
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>