TRONIC Usb Car Charger User Manual

June 4, 2024
TRONIC

TRONIC Usb Car Charger

TRONIC-Usb-Car-Charger-featured-image

List of pictograms used

  • Direct current / voltage
  • CAUTION! This symbol with the signal word “CAUTION“ indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury.
  • ATTENTION! This symbol with the signal word“ ATTENTION“ indicates a potential property damage, if not avoided, could result in property damage.
  • Technology to optimise charging time
  • CE mark indicates conformity with relevant EU directives applicable for this product.
  • The equipment complies Quick Charge 3.0 specifications and agreements issued by Qualcomm Technologies, Inc.

USB CAR CHARGER

Introduction

We congratulate you on the purchase of your new product. You have chosen a high quality product. The instructions for use are part of the product. They contain important information concerning safety, use and disposal. Before using the product, please familiarise yourself with all of the safety information and instructions for use. Only use the product as described and for the specified applications. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

Intended use

This USB CAR CHARGER (hereinafter called “product”) can be used to charge and power devices that can be charged or powered from a USB port as standard. The product can be used in a normal car socket that provides the specifications given under “Technical data“. The product is not intended for commercial use. The manufacturer is not liable for any damages caused by any use other than for the intended purpose.

Description of parts

TRONIC-Usb-Car-Charger-01

  1. USB port type A
  2. Control lamp
  3. Instructions for use

Technical data

  • Input: 12/24 V , 3.5 A
  • Output USB port (Quick Charge 3.0) 1 : 5 V , 3 A, 9 V , 2 A, 12 V , 1.5 A
  • Max. output power: 18 W
  • Operating temperature: 0 – 25 °C
Scope of delivery
  • 1 USB car charger
  • 1 Instructions for use
Trademark notices

USB® is a registered trademark of USB Implementers Forum, Inc.
The Qualcomm Quick Charge 3.0 trademark and trade name is the property of their respective owners.
The TRONIC trademark and trade name is the property of their respective owners.
The Smart Fast Charge trademark and trade name is the property of their respective owners.
Any other names and products are trademarks or registered trademarks of their respective owners.

Safety notes
PLEASE READ THE INSTRUCTIONS PRIOR TO USE! PLEASE KEEP THE INSTRUCTIONS IN A SAFE PLACE!

  •  Check the product for damage before use. Never use a damaged product.
  • This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be made by children without supervision.
  • Do not expose the product to direct sunlight or moisture.
  • Only plug the product into car sockets that are easily accessible, so that you can unplug it easily in case of an emergency.

Start-up

ATTENTION! RISK OF OVERHEATING! Make sure that the connected load has a maximum current consumption of 3 A (3000 mA).
ATTENTION! If you use the product under max. loading condition, the product may get hot. This is normal because in this condition, the product uses more power and therefore generates more heat.

  •  Plug the product into a correctly installed car socket that provides the specifications given under “Technical data“. The control lamp 2 lights up white to show that the product is receiving current.
  • Connect your external devices that should be charged with the product by plugging its USB plug into the USB port type A 1 .

CAUTION!
If the control lamp 2 lights off while connecting with your external devices: This indicate that the product is in overload or fault condition. Please unplug your external devices from the product immediately.
IMPORTANT! You can leave the motor on or off when using the product. Be aware that the battery of car might become low because the product still consumes power when the motor is off. Disconnect the product completely from the power supply if you are not intended to charge your external devices. Attention: Do not switch the ignition on or off during the charging process, as this can lead to differences or peaks in the power supply.

  • Disconnect your charged external device from the product after charging, by unplugging the USB plug from the USB port type A 1 .
  • Disconnect the product from the car charging socket when it is no longer in use.

Cleaning and care

  • Always unplug the product from the car socket before cleaning!
  • Use a dry, soft and lint-free cloth for cleaning and care.

Disposal

Packaging:
The packaging is made of environmentally friendly materials, which may be disposed of through your local recycling facilities. Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1–7: plastics / 20–22: paper and fibreboard / 80–98: composite materials.

Product:
Contact your municipality for information on how to dispose of your worn- out product.
The adjacent symbol of a crossed out dustbin on wheels indicates this product is subject to Directive 2012/19/EU. This directive states at the end of the life this product must not be disposed of through regular household refuse but must be returned to special collection sites, recycling depots or waste management companies.

This disposal is free of charge to you. Protect the environment and dispose of properly. The product is recyclable, subject to extended manufacturer responsibility, and collected separately.

Warranty and service

The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of product defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.
The warranty for this product is 3 years from the date of purchase. The warranty period begins on the date of purchase. Please keep the original sales receipt in a safe location. This document is required as your proof of purchase.
Should this product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you. This warranty becomes void if the product has been damaged, or used or maintained improperly.
The warranty applies to defects in material or manufacture. This warranty does not cover product parts subject to normal wear, thus possibly considered consumables (e.g. batteries) or for damage to fragile parts, e.g. switches, rechargeable batteries or glass parts.

Warranty claim procedure

To ensure quick processing of your case, please observe the following instructions:
Please have the till receipt and the item number (IAN 377477_2101) available as proof of purchase.
You will find the item number on the rating plate, an engraving, on the front page of the instructions for use (bottom left), or as a sticker on the rear or bottom of the product.
If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.
You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

Service

Service Great Britain Tel.: 08000569216
E-Mail: owim@lidl.co.uk
Service Ireland
Tel.: 1800 200736
E-Mail: owim@lidl.ie

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals