hi-ltte HT-380BSW 380W Beam Spot Wash Moving Head Light User Manual

hi-ltte HT-380BSW 380W Beam Spot Wash Moving Head Light

Specifications:

• Product Name: HT-380BSW 380W Beam Spot Wash Moving Head IP65
• Lamp: Original 371W Osram lamp
• Features: High brightness, strong light effect, clear gobo, fast and smooth pan&tilt running, precise positioning, uniform pure color
• Gobos: 8 rotating gobos, 15pcs gobos (11 gobos + 4 open)
• Colors: 14 colors with white color wheel
• Prism Effect: 3 kinds of prism effect from 2pcs prism combination
• Applications: Widely used in outdoor events, bridge, theme park, architecture, and other outdoor projects

Product Usage Instructions

Safety Tips:
Read the guidebook containing installation, use, and maintenance information carefully.

Packing and Shipping:

Packing:

1. Disconnect the power supply and allow the lamp to cool for at least 15 minutes.
2. Close the light protect lock after cleaning the surface.
3. Cover the light and place it gently in the box upside down.
4. Add lighting accessories after placing the light in the box.
5. Do not stack more than two crates upside down.

Unpacking:

1. Open the box and bag.
2. Lift the light from the box or flight case using handles or a lift boom.
3. Before turning on the light, open the light-protecting lock.

Safety Standards:
Ensure regular safety checks of light and installation materials. For installation, seek professional assistance to prevent dangers from incorrect installation.

Hook Installation:
The beam light can be placed on a stage or stand using a quick lock system. Use two fixtures to secure the equipment with four M8 stainless steel socket screws per hook.

FAQ:

• Q: What should I do if there is transportation damage upon receipt of the product?
  A: If there is damage to the fold closure caused by transport, do not use the fixture and contact customer support immediately.

• Q: Can I install the product myself?
  A: It is recommended to seek professional assistance for installation if you do not have work conditions and experience in similar tasks to prevent any dangers associated with incorrect installation.

Foreword

• Thanks for choosing a product of 380W Beam Spot Wash Moving Head Light Waterproof, it is our newest the latest independent research and development of a high-grade quality product.
• With the perfect combination of internationally advanced electronic control technology and excellent human chemical. It is in full compliance with the CE standard supports the international DMX512 signal control mode.
• It is fitted with the original 371W Osram lamp, with high brightness, strong light effect, clear gobo, fast and smooth pan&tilt running, precise positioning, and uniform pure color.
• It has a super high and super long distance range, fitted with 8 rotating gobos, also has 15pcs gobos (11 gobos+4 open), a frosted lens, 14 colors with the white color wheel, with 3 kinds of prism effect comes from 2pcs prism combination.
• The fixtures are widely used in outdoor events, bridges, theme parks, architecture, and other outdoor events and projects.

Safety Tips

Please read the guidebook that contains the installation, use, and maintenance of important information

• Before using this product, please observe the product is not unwrapped or damaged during transportation. As a result of damage during transportation, please do not use the lights, and contact the dealer or manufacturer.
• Before running products, ensure that the voltage and Hertz are by the requirements of lights.
• It’s very important, to connect the ground wire to avoid the electric shock.
• This product must be installed in sufficient space, adjacent to the interface at the shortest distance of 100 cm, to ensure that the lights will not crash each other.
• Before moving or repairing the product, please unplug the power.
• When it working, ensure that no near objects.
• When installing this product, please use the safety rope. When handling this product, lift the armrest base, rather than the lamp body.
• This product is suitable for a maximum temperature of 45 degrees Celsius, when the surrounding environment is higher than 45, please do not use this product.
• Do not touch when the product is running, to prevent bruising hands.
• Problems happen when operating performances, should immediately stop using the lights. Do not carry out maintenance, or repair damage caused or likely to cause other problems. Please contact the company’s maintenance repair.
• During the repair process, use the same type of accessories.
• Please read the instructions carefully, especially regarding the installation, use, and maintenance parts. Important that the lighting in the transport process must be packed anti-shock protection carton or flight case.

Technical Parameters

• DMX Channel: 24CHs
• Control model: DMX512, RDM
• LED LCD Display+ Press button, English/Chinese
• Light Source: Osram 371W Lamp
• XY axis super fast and ultra silence 3-phase step motors
• Color temperature is 8000K, life span is 1500Hs
• 14 Color with white, semi-color effect
• 11 fixed gobo with 4 open
• Prism: 8+16 prism, can combine dynamic rotating effect
• Optical lens: Advanced optical system
• Frost effect: Adjustable Soft Spot Angle
• Focus: linear focus
• Dimmer: 0-100% linear dimmer
• Beam Angle: 2-40°
• Strobe: 2-blade strobe (0.5-9FPS)
• 15pcs super silence motors, 2pcs pan&tilt 3-phase step motors, 16bit.
• Housing: High temperature resistant, UV resistant, and antioxidant alloy plastics+ National standard die casting
• Frost Angle: 18°
• Power Consumption: 500W
• IP Rate: IP65
• Weight: 31.7KG
• Size: 419326 662.6mm
• Extended functions: support RDM, wireless signals are optional.

Technical Parameters

PACKING AND SHIPPING

380W Beam Moving Head IP65 is packaged by carton or standard 1in1 flight case, accessories items are as below

Packing

1. Disconnect the power supply so that the lamp cools completely before packaging, at least 15 minutes or more.
2. Close the light protect lock after cleaning the surface of the light dust
3. Cover the light, seize the equipment with both sides aluminum handles to make it upside down and gently place it in the box.
4. Add lighting accessories after placing the light in the box.
5. Up to two crates stacked prohibited upside down.

Unpacking

1. Open the box and bag
2. Seizing the equipment handles, lifting and carrying away the light from the box . Or opening the flight case, placing the lift boom close to the light base, and then equipping clamps on the light base bottom. Tightening quick install locks. At last, rising away boom to the top of the lamp from the flight case put the flight case away.
3. Before turning on the light, should open the light-protecting lock.

Note:
Upon receipt of lamps, please check if there is damage to the fold closure caused by transport, where there is transportation damage, please do not use this fixture, and as soon as possible contact.

Safety Standards

Users should ensure that light and installation materials are checked for regular safety checks. Please do not install it yourself if you do not have the professional work condition and similar experience. Please ask the professionals to operate it. Incorrect installation will cause danger.

The working temperature for the equipment is available between -20°and 45°. Do not use the equipment outside of this environment. Don’t stand under the light when the light is installed, dismantled, moved, or serviced. The operator must ensure that the fixtures are securely connected. Installing the light after professionals approve electrical parameters make sure that this installation must be checked at least once per year by experts

Hook Installation

1. 480-beam light can be placed on the stage or a stand in any direction, quick lock system can quickly and easily remove or install a light hook.
2. Note: Two fixtures must be used to fix the equipment, and each hook is fixed with four M8 stainless steel socket screws.
3. If the truss can be lifted the equipment can be directly clamped from the flight case and locked fixture base. Then hung on the light and fixed it. Before raising the light to the right height, connect the power line and signal line.

Note:
Lights be placed vertically and upward, the shortest distance between working lights must be more than or to the tThe o 900mm, The lighting installation layout is as follows.

Data cable

The data cable is DMX512 signal

Caution: Signal line connections are X-type connector

• X-type connector—– If the external flexible cable or cord of this light is damaged, please replace the professional cable or cord from the manufacturer or its agent.
• DMX of lights input and output connects to a 3&5-pin XLR, the first pin is grounded, the second negative signal is a second pin, the third pin connects to the positive polarity signal, and the fourth and fifth are empty.
• To prevent reception reflection and interference control signal, a terminal plug must be installed on the first branch of the connected device’s last 3-pin output jack

The controller connects to the nearest input XLR 3-pin, then from the output of the device connects to the input of the next device, the continuous connection one by one, the final output data cable terminal equipment plugs one end into the terminal.

If the signal transmission is long-distance, a 512 signal amplifier must be added. DMX512 signal controller connects to the input of the amplifier first, then connects to the fixture from its output, coupled with the terminal plug last.

Note:

1. Do not use two separate output connections. To connect the branch, a separating consecutive DMX512 signal amplifier must be used.
2. Please use the specialized DMX512 shielded twisted-pair cable. Standard microphone cables can not be reliably controlled long-distance data.

Ac Power

Fuse Size

Power Connection
If the external flexible cable or cord of this light is damaged, the line is up to the manufacturer or its service agent similarly qualified person to replace, it to avoid danger. Connect the power supply personnel must have the appropriate qualifications before proceeding, you must make sure you are using the power supply voltage that matches the voltage identified and has overload or leakage protection. Directly connect the device to the power supply, do not connect to the silicon box dimming system, otherwise damage to the equipment.

Lamp

Light Source Description
380W beam spot wash moving head IP is fitted with 371W Osram, single-ended, and is a short arc point light source, and its color temperature is 7500K and very stable, CRI:85. Life span is over 1500 hours (according to the using situation)

Note:

1. Please do not install other similar light bulbs, otherwise it will cause safety hazards or damage the equipment.
2. To reduce the risk of damage to the luminaire, replace the lamp before it exceeds the life of the lamp.
3. It is forbidden to use scratched and damaged LED light source

Lamp Replacement
Disconnect the power, so that the lamp cooling, the arm of the lamp body lock is locked in a horizontal position.

Split bulbs:
Remove the four screws from the back cover of the lamp body, remove the 14 screws fixed by the radiator, and place the waterproof sealing ring carefully.

• With the appropriate force push down the bulb when the lamp cup is beyond the edge of the stainless steel shrapnel, taking up the lamp.
• Install the bulb is the opposite of the operation.

(Note: the waterproof sealing ring must be installed according to the orientation, and ensure that every screw is tightened. Can determine the waterproof performance of lamps and lanterns)

NOTE:

• Avoiding oil-stained hands.
• To prevent damage, make sure you handle the lamp with care when installing and dismantling it. Do not let the bulb hit hard objects around it as it will cause damage.

Correction

• The lamp has been corrected before selling. In the rare case that the lamp may need correction, follow these steps: The light is reset by turning on the ower and using the menu or console light bulb to play the sharp beam.
• Use a cross screwdriver to open the light boonnon e bonnet side which is printed “this cover to replace the lamp”flat-head screwdriver driver to adjust the lamp bracket adjustment screw, turn the screw clockwise or counterclockwise, and the lamp can be right or left to adjust.

Functions

Gobo Wheel

• A metal gobo wheel consisting of 11 fixed gobo + 4 open, customers can change their own custom simple pattern pieces as needed.
• A glass rotating gobo wheel with 8 gobos, which could be customized.

STATIC GOBO WHEEL

ROTATING GOBO WHEEL

Color Wheel
The color wheel is composed of 14 high-standard fixed colors. Users can easily choose the color they like and create a perfect lighting effect. At the same time, it can be used with the gobo wheel. The effect is better, and the colorful pattern can be changed at will effect. (You can change your custom color wheel at any time according to customer needs)

Optical lens focusing
The prism wheel is equipped with an 8-facet prism and a 16-facet prism. It can be rotated clockwise and counterclockwise. The speed is adjustable. With the color and gobo, various brilliant lighting effects can be created. The prism wheel passes high-precision ultra-fast. The eight-head screw motor adjusts the size of the prism spot to create a dynamic effect of the amazing prism.

Prism Wheel
The prism wheel is equipped with an 8-facet prism and a 16-facet prism. It can be rotated clockwise and counterclockwise. The speed is adjustable. With the color and gobo, various brilliant lighting effects can be created. The prism wheel passes two high precision and ultra-fast. The eight-head screw motor adjusts the size of the prism spot to create a dynamic effect of the amazing prism.

Dimmer & Strobe
0-100% mechanical dimming, instant switching, and stroboscopic speed can be adjusted freely, up to 12 times/sec, with a special function of random strobe.

Frost
The frost consists of a frost piece, which is done according to the actual control to achieve the soft light effect you want.

Pan & Tilt

• Pan scanning 540°, Tilt scanning 270°, with 16BIT precise positioning function.
• Pan & Tilt speed can be adjusted.

Display Setup

LCD Display Introduction

Menu Operation:

Press:

ENTER/UP/DOWN/ESC
Main Menu
1. DMX Address:01-512
2. Channel Mode:24
3. Reset Operation| 1. Motor off| Yes/No
| 2. Pan/Tilt|
| 3. Strobe|
| 202-227| Gobos clockwise switching, from fast to slow
---|---|---
| 228-229| Stop
| 230-255| Gobos anti-clockwise switching, from slow to fast
6| | Gobo Rotation
| 0| No action
| 1-127| Gobo indexing
| 128-191| Gobo clockwise rotation: from fast to slow
| 192-255| Gobo anti-clockwise rotation: from slow to fast
7| | Prism
| 1-63| No effect
| 64-255| Prism insertion
8| | Prism Rotation
| 0| no
| 1-127| Prism anti-clockwise rotation, from fast to slow
| 128-254| Prism clockwise rotation, from slow to fast
| 255| stop
9| | Zoom
---|---|---
| 0-255| Zoom from small to large
| 0-255| Zoom fine, from small to large
11| | Focus
| 0-255| Focus, from far to near
12| | Focus Fine
| 0-255| focus fine, from far to near
13| | Reset
| 0-209| Empty
| 210-229| All reset
| 230-255| Empty

Fault Analysis And Resolution

Listed below are a few common problems that you may encounter, with solutions.

Equipment does not work, no light output and the fan does not work;

1. Check the power connection and main fuse.
2. Be sure the voltage of the connector.

Not responding to DMX Console;

1. After connecting the controller, the equipment should be working. If it does not work properly, please check if the signal plug and power cable are connected correctly.
2. If the DMX LCD is on and no response to the channel, check the address settings and the polarity of the DMX output voltage.
3. If the signal of the product is unstable, please check the input terminal and circuit boards.
4. Try using another DMX controller.
5. Check to see if the DMX cables run near or alongside to high-voltage cable. It may cause damage or interference to the DMX interface circuit.

One of the channels is not working:

1. The stepper motor might be damaged or the cable connected to the PCB is broken.
2. The motor’s drive IC on the PCB might be out of condition.

FIXTURE CLEANING

• The cleaning of internal and external optical lenses or mirrors must be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture operates: smoky or particularly dirty surroundings can cause a greater accumulation of dirt on the unit’s optics.
• Clean with a soft cloth using normal glass cleaning fluid.
• Clean the external optics at least every 30 days.
• Clean the fans on the head and base every 90 days.
• NOTE: Disconnect the fixture before clear.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>