MAJESTIC DEC 665 HD USB HD Digital Terrestrial Receiver User Manual
- June 6, 2024
- Majestic
Table of Contents
- MAJESTIC DEC 665 HD USB HD Digital Terrestrial Receiver
- SAFETY WARNINGS
- IMPORTANT NOTES
- REMOTE CONTROL
- Battery Installation
- FRONT AND REAR PANEL
- CONNECTING THE RECEIVER
- INSTALLATION GUIDE
- MENU
- Troubleshooting
- INFORMATION TO USERS OF DOMESTIC EQUIPMENT
- Battery disposal
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
MAJESTIC DEC 665 HD USB HD Digital Terrestrial Receiver
SAFETY WARNINGS
For safe use and maximum performance, please read this manual carefully before
use.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT DISASSEMBLE THE
APPLIANCE. THERE ARE NO USER-SERVICEABLE PARTS. FOR REPAIRS CONTACT QUALIFIED
TECHNICAL STAFF.
To avoid the danger of electric shock or fire, do not expose to rain or
moisture. Read all safety instructions before use.
- The symbol to the side warns the user of the presence of voltage that could not be isolated and may cause electric shock.
- This symbol warns the user that before using the unit, it is necessary to carefully read the instruction booklet.
IMPORTANT NOTES
-
The use must be allowed only to adults and responsible persons, adequately educated on the damages deriving from incorrect use.
-
This appliance can be used by children aged 8 and over if they are under supervision or if they have received instructions regarding the safe use of the appliance and if they understand the dangers. involved. Cleaning and maintenance operations by the user must not be carried out by children unless they are over 8 years of age and operate under supervision. Keep the appliance and its cord out of the reach of children under the age of 8.
-
The devices can be used by people with reduced physical, sensory or mental abilities or with a lack of experience and knowledge if they are supervised or if they have received instructions regarding the safe use of the appliance and understand the dangers involved.
-
Children must not use the appliance as a game.
-
Do not allow the appliance to be used by children or the disabled without supervision
-
Keep away from pets
-
Never use the appliance in places where the cord, plug and the product itself may come into contact with water or wet surfaces. Do not use the appliance outdoors, as rain could create short circuits. Do not touch the appliance with wet hands.
-
Avoid installing the unit in the locations listed below:
- Places exposed to direct sunlight or close to equipment that generate heat, such as radiators;
- Above other stereo equipment that may radiate excessive heat;
- Places that block ventilation or are humid or dusty;
- Environments subject to constant vibration;
-
Do not place accessories with naked flames, such as lighted candles, on the appliance.
-
Do not try to repair or intervene on the appliance yourself. Incorrect interventions or tampering can void the guarantee. In the event of any damaged parts or suspected malfunction, discontinue use immediately and consult qualified personnel. Never immerse the appliance in water or other liquids. Do not place vessels containing liquids (such as vases) on top of the appliance.
-
Do not touch the appliance with wet hands and do not place it near sinks, tubs or containers of liquids.
Use the product only if it is in perfect condition. If the appliance has been immersed in water or is damaged, contact qualified personnel. Do not try to repair the appliance yourself. Any tampering or incorrect repairs void the warranty. -
The product should not be used if it has been dropped or if there are any visible signs of damage.
-
Exposure to high volume levels can cause hearing problems, including permanent damage. The predisposition to hearing loss varies from person to person, however constant exposure to high volume levels is harmful to anyone. Moderate the volume level.
REMOTE CONTROL
- STANDBY: Turn on/off
- Page -: In the program list and multimedia, page down Page +: In the program list and multimedia, page up Mute: Turn off/on voice.
- L/R: Selection of available languages
- FAV: Show favorites list
- Subtitle: Enter/exit subtitle menu
- TEXT: DVB teletext
- GOTO: Go forward or backward under the video file
- Recall( ): Return to previous menu
- EPG: Electronic Program Guide
- Menu: Enter the main menu
- USB: Play previous USB media
- EXIT: Go back directly to full-screen display
- TV/RADIO: Switch between TV and Radio mode Number Key: <0-9>
- Direction key: Up/down/left/right
- OK: Confirm selection on operating menu Or hot-key of “QUICK SELECT” in full-screen playing VOL -/+: Volume adjusting
- INFO: Display program information in full-screen playing CH+/CH-: Go next/previous channel.
- PLAY: Play movie playing
- PAUSE: Pause movie playing
- Stop(■): Stop movie playing
- PREV( ): Previous chapter
- NEXT( ): Next chapter
- FR( ): Rewind
- FF( ): Fast forward
- RED KEY: context key to the menu
- GREEN KEY: HDMI video resolution change/function key contextual to the menu
- YELLOW KEY: change the image ratio/function key contextual to the menu
- BLUE KEY: function key contextual to the menu
Battery Installation
Insert the batteries (included) while observing the correct (+) and (-) polarities as illustrated bellows:
- Remove the battery comer In the direction of the arrow.
- Insert two 1.5V AAA batteries, Paying attention to the correct Polarities (+ and -)
- Replace the battery cover. About the batteries If the remote control unit fails to work even when it is operated near the receiver, please replace the batteries.
Use size UM-4 (AAA) BATTERIES.
Notes:
Do not use rechargeable (Ni-Cd) batteries.
Do not attempt to recharge, short circuit, disassemble or throw the batteries
in the fire. Do no drop, step on or cause any impact to the remote control
unit. This may damage it, resulting in malfunction.
Do not mix old and new batteries.
If the remote control unit is not going to be used for a long time, remove the
batteries.
Caution
Keep batteries out of children’s reach. If batteries are swallowed, contact a
physician immediately.
FRONT AND REAR PANEL
- Power on/off button
- Change channel up button
- Change channel down button
- Remote control signal sensor
- USB jack
- RF-IN: Digital Terrestrial TV Broadcast signal input
- HDMI output (version 1.4)
- Scart output
- AC input power source
CONNECTING THE RECEIVER
Before you connect your STB to your TV please ensure that it’s is placed on a
flat and stable surface. Please refer to the below diagram and your TVs user
manual for cable installation instructions.
INSTALLATION GUIDE
If you are using the unit for the first time or have restored the unit to Factory Default, the installation Guide Menu will appear on you TV screen.
- [OSD Language] Press RIGHT/LEFT Key to select a language.
- [Country] Press the RIGHT/LEFT key to Select your country of residence.
- [Channel Search ] Press RIGHT/LEFT Or OK key to begin Automatic channel Search.
If no channels is found during the channel searching process, please check your antenna connections and antenna are in working order, after the scanning process is completed the receiver with automatically save the scanned channels and display the first channel in the list. While you are using the unit, you can access the CHANNEL search menu to do the AUTO/MANUAL channel search. Press MENU key on the remote and select [Channel Search] using RIGHT/LEFT keys.
MENU
MAIN MENU
Most functions are available in main menu. A password will be required when
modifying advanced options in the Menu. The Default password is “000000”.
Press the menu key on the remote control; You can access the Main Menu. Use the LEFT and RIGHT Keys to navigate through the menu. Select the Desired option and press the OK key or the RIGHT key to adjust the settings. Press the EXIT key to exit the main menu.
A. Program Settings:
In this menu you can edit program preferences, check the TV program guide
(EPG), choose the type of channel sorting and change the duration of the
information banner.
B. Picture Settings:
In this menu you can set the correct image ratio, depending on the TV in use,
the video resolution of the HDMI output, the TV format (PAL / NTSC), the type
of video signal adopted by the scart socket and the transparency level of the
OSD menu.
C. Channel Search settings:
(a) Auto Search: This option will automatically search for TV and Radio
channels and save them once the scanning is complete. All previously saved
channels and settings will be deleted.
(b) Manual Search: This option allows you to scan for new channels without
deleting previously saved channels and settings.
- Select “Manual Search” and press the “OK” or “Right” key. The Manual Channel search screen will appear.
- Press the “Right” or “Left” keys to select the channel frequency.
- Press the “OK” key to start scanning for new channels.
- If a new channel is found, it will be saved and stored along with the rest of the channels. If no channels are found, the unit will automatically exit after finishing the scanning process.
D. Time settings:
In this menu it is possible to modify the time zone settings (GMT), activate
the Sleep (programmed automatic switch-off) and set both the switch-on and
switch-off automatically, setting a time for both.
E. Option:
The Menu contains the following options:
OSD Language: Change the ON Screen Display language. Subtitle language: Select
the subtitle language.
Audio language: If the program has multi-languages. Set your preference here.
F. System settings:
The menu contains the following options:
a) Parental Guidance: The options for setting up the age reference starts from
4 years to
18 years. To access this function you will require inputting a code. The
default password is “000000”. This function can also be deactivated simply by
setting it to OFF.
b) Set Password: It allows you to modify the default password, which is
“000000”.
c) Restore Factory Default: It allows you to restore the unit to its default
factory settings. You will be asked to enter your password “000000”. Press
“OK” key once done.
Note: This function will delete all your saved channels and your personal
settings. d) Information: You can check the software version of your unit.
If corrective software updates are published on our website
www.newmajestic.com this function will allow them to be executed.
G. USB Settings:
The USB menu has 3 options:
(a)MULTIMEDIA:
While in TV mode, press the “USB” button to access to the Multimedia menu. The
menu contains 3 different icons: Music, Photo and Movie.
The MUSIC option is used to play audio files, IMAGES is used to play image
files, VIDEO is used to play video files.
Video codec: MPEG-2/4 (H.264) / VC-1 / HEVC (H.265)
Audio codec: MPEG-1 / MPEG-2 layer / 11 / MP3 /AC-(Dolby Digital) E-AC-3
(Dolby Digital Plus) Container: TS / MPG / MP4 / AVI / MKV
Resolution: 1080p l 1080i l 720p l 576p l 576i l 480p l 480i
Frames: MPEG-2/4 1080p @ 30fps / (H.264) l 1080p @ 60fps l HEVC (H.265) 1080p
@ 60fps Image file: JPEG / PNG / BMP
Audio file: MP3
This device supports USB sticks with FAT32 system files.
(b) Photo settings:
- Interval: set the slide show interval between 1-8 seconds.
- Type: set the slide show effect between 0-59 or random.
- Image report: [ Keep]: displays the image in its original appearance. [Reject]: Display the image in full screen.
(c) Video settings:
-
Subtitles:
subtitles in normal mode.
[Large]: Displays subtitles using large characters. -
Subtitle background:
subtitles on a transparent background. [Gray]: Displays subtitles on a gray background. [Yellow / Green]: Displays the subtitles on a yellow/green background. -
Text color:
[Red]: displays subtitles in red character [Blue]: displays subtitles in blue character [Green]: displays subtitles in green font. [White]: Displays subtitles in white font. [Black]: displays subtitles in black font.
Troubleshooting
The below table is s list of common problems that many occur with your receiver.
Fault| Possible cause|
---|---|---
Power on, but
nothing display red on screen
| Unit not turned on at mains switch| Ensure power plug is plugged into wall
socket and switch is on
TV picture drops out and thru unit displayers “NO
signal”
| Antenna is not properly connected or you are in a bad
reception area
| Talk to your local TV antenna technician about reception problems in your area and whether a new antenna would
benefit you
Receiving digital TV but missing some channels| Antenna is not properly connected or you are in a bad
reception area
| Talk to your local TV antenna technician about reception problems in your area and whether a new antenna would
benefit you
Remote is not working| Batteries are flat or there is interference| Talk to your local TV antenna technician about reception problems in your area and whether a new antenna would
benefit you
TUNER
- Input connector: IEC16902.Female
- Input Frequency range: VHF&UHF
- Num of RF input: 1
- Input impedance: 75ohm
- RF output connector: (Bypass)IEC 169-2 male
- Loop through: 177.5-866MHz
Demodulation
- Standard: ETSU EN300 744
- Guard interval models: 1/32, 1/16, 1/8 active symbol duration
- FEC Modes rate: 1/2,2/3,3/4,5/6.7/8
- Carriers/constellation: All modes supported including non-hierarchical
- Demodulation: COFDM (QPSK/QAM16/QAM64/QAM256)2k and 8K.
Video decoder
- Stand: ISO/IEC 13818-2 and ISO/IEC 14496-10
- Transport stream: ISO/IEC 13818-1
- Video decoding: MPEG-2 SD/HD (MP@ML and MP@HL), MPEG-4 H.264/AVC H.265/HEVC SD/HS DIVX 4.X~5.X JPEG, BMP, PNG, MOTION JPEG AVI, VOB, MOV, MKV
- Aspect ratio:4: 3/16:9
AUDIO DECODER
- Standard: SO/IEC13818-3 TR1011154
- Audio decoding: MPEG-1 and MPEG-2 layer 1 &11
- Dolby Digital (AC-3): Stereo down-mixing to analog and digital audio outputs (Including HDMI).For digital outputs, L-PCN stereo encoding Is provided
- Sample rate: 32KHZ, 22.1KHZ, 44.1KHZ, 48KHZ
Subtitle
- Subtitle: DVB subtitle
Power
- AC input range: AC 110 – 240V 50/60Hz
- Power consumption: <10w
- Standby consumption: 0.5w
INFORMATION TO USERS OF DOMESTIC EQUIPMENT
Pursuant to Art. 25, Paragraph 1 of the Legislative Act N. 49 14th March 2014,
“Implement of the Directives 2011/65 / EU and 2012/19 / EU concerning the
reduction of the use of hazardous substances in electrical and electronic
equipment, as well as waste disposal”.
The crossed bin symbol on the appliance or on its packaging indicates that the
product at the end of its useful life must be collected separately from other
waste. The user must, therefore, dispose the equipment at the end of its life
to the appropriate electronic and electrotechnical waste centers, or return it
to the
retailer at the time of purchase of a new type of equivalent equipment, one by
one. Appropriate separate disposal for the subsequent start-up of the disused
equipment for recycling, treatment and compatible environmental disposal helps
to avoid possible negative effects on the environment and health and favors
the re-use and/or recycling of the materials it is composed the equipment.
The illegal disposal of the product by the user involves the application of
the penalties referred to in current laws.
Any rechargeable batteries or rechargeable batteries contained in the device
must be disposed of separately in the appropriate expired batteries bins.
Battery disposal
Disposal of expired batteries must take place at the appropriate recycling centers or according to the local authority. Batteries in compliance with the 2013/56 / EC directive. Warning: the battery may explode if replaced incorrectly if exposed to heat or water. Do not cause a short circuit. Replace the battery only with an equivalent. Do not place the battery in direct sunlight or in places excessively hot (over 40 ° C). use only with the adapter provided by the manufacturer. Do not hit or press the battery.