Majestic DEC 663N HD Digital Terrestrial Receiver User Manual
- June 6, 2024
- Majestic
Table of Contents
DEC 663N HD Digital Terrestrial Receiver
User Manual
Please read this user manual before using or connecting this product.
And keep it handy for future reference.
To reduce the risk of electric shock.
Do not remove the cover.
No user-serviceable parts inside. Refer servicing to qualified service
This symbol indicates “dangerous voltage” inside the product that presents a
risk of Electric shock or personal injury.
This symbol indicates important instructions accompanying the
- Read, follow and keep these instructions.
- Do not use this apparatus near water.
- Clean only with a damp cloth. Please unplug the power prior to cleaning.
- Do not block any of the ventilation openings.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Protect the power cord from being walked on or pinched particularly at the plug, receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories included within this package.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel.
REMOTE CONTROL
STANDBY : Turn on/off
Page -: In the program list and multimedia, page down
Page +: In the program list and multimedia, page up
Mute: Turn off/on voice.
L/R: Selection of available languages
FAV: Show favorites list
Subtitle: Enter/exit subtitle menu
TEXT: DVB teletext
GOTO: Go forward or backward under video file
Recall( ): Return to previous menu
EPG : Electronic Program Guide
Menu: Enter main menu
USB: Play previous USB media
EXIT: Go back directly to full screen display
TV/RADIO: Switchbetween TV and Radio mode
Number Key: <0-9>
Direction key: Up/down/left/right
OK: Confirm selection on operating menu Or hot-key of “QUICK SELECT” in
full-screen playing
VOL -/+: Volume adjusting
INFO: Display program information in full-screen playing
CH+/CH-: Go next/previous channel.
P LAY: Play program playing or movie playing
PAUSE: Pause program playing or movie playing
Stop(■): Stop movie playing
PREV( ): Previous chapter
NEXT( ): Next chapter
FR( ): Rewind
FF( ): Fast forward
RED KEY: context key to the menu
GREEN KEY: HDMI video resolution change/function key contextual to the
menu
YELLOW KEY: change the image ratio/function key contextual to the menu
BLUE KEY: function key contextual to the menu
Battery Installation
Insert the batteries (included) while observing the correct (+) and (-) polarities as illustrated bellows:
-
Remove the battery comer In the direction of the arrow.
-
Insert two 1.5V AAA batteries, Pay attention to the correct Polarities (+ and -) 3, and Replace the battery cover. About the batteries
If the remote control unit fails to work even when it is operated near the receiver, please replace the batteries.
Use size UM-4 (AAA) BATTERIES.
Notes:
Do not use rechargeable (Ni-Cd) batteries.
Do not attempt to recharge, short circuit, disassemble or throw the batteries
in the fire.
Do not drop, step on or cause any impact to the remote control unit. This may
damage resulting in malfunction.
Do not mix old and new batteries.
If the remote control unit is not going to be used for a long time, remove the
batteries.
Caution
Keep batteries out of children’s reach. If batteries are swallowed, contact a
physician immediately.
FRONT AND REAR PANEL
- USB jack
- DC IN 5V/1A
- IR sensor jack
- ANT-IN: Digital Terrestrial TV Broadcast signal input
- ANT-OUT: Digital Terrestrial TV Broadcast signal output
- HDMI output (version 1.4)
- Scart socket (RGB / CVBS)
INSTALLATION
CONNECTING THE RECEIVER
Before you connect your STB to your TV please ensure that it’s is placed on a
flat and stable surface. Please refer to the below diagram and your TVs user
manual for cable installation instructions.
INSTALLATION GUIDE
If you are using the unit for the first time or have restored the unit to Factory Default, the installation Guide Menu will appear on you TV screen.
- [OSD Language] Press the RIGHT/LEFT key to select a language.
- [Country] Press the RIGHT/LEFT key to select your country of residence.
- [Channel Search ] Press the RIGHT/LEFT Or OK key to begin Automatic channel Search.
If no channels is found during the channel searching process, please check that your antenna connections and antenna are in working order, after the scanning process is completed the receiver with automatically save the scanned channels and display the first channel in the list. While you are using the unit, you can access the CHANNEL search menu to do the AUTO/MANUAL channel search. Press the MENU key on the remote and select [Channel Search] using the RIGHT/LEFT keys.
MENU
MAIN MENU
Most functions are available in the main menu. A password will be required
when modifying advanced options in the Menu. The default password is “000000”.
Press the menu key on the remote control; You can access the Main Menu.
Use the LEFT and RIGHT keys to navigate through the menu. Select the desired
option and press the OK key or the RIGHT key to adjust the settings.
Press the EXIT key to exit the main menu.
A. Program Settings:
In this menu, you can edit program preferences, check the TV program guide
(EPG), choose the type of channel sorting and change the duration of the
information banner.
B. Picture Settings:
In this menu, you can set the correct image ratio, depending on the TV in use,
the video resolution of the HDMI output, the TV format (PAL / NTSC), the type
of video signal adopted by the scart socket (CVBS / RGB) and the transparency
level of the OSD menu.
C. Channel Search settings:
(a) Auto Search: This option will automatically search for TV and Radio
channels and save them once the scanning is complete. All previously saved
channels and settings will be deleted.
(b) Manual Search: This option allows you to scan for new channels without
deleting previously saved channels and settings.
- Select “Manual Search” and press the “OK” or “Right” key. The Manual Channel search screen will appear.
- Press the “Right” or “Left” keys to select the channel frequency. (3) Press the “OK” key to start scanning for new channels.
- If a new channel is found, it will be saved and stored along with the rest of the channels. If no channels are found, the unit will automatically exit after finishing the scanning process.
D. Time settings:
In this menu it is possible to modify the time zone settings (GMT), activate
the Sleep (programmed automatic switch-off) and set both the switch-on and
switch-off automatically, setting a time for both.
E. Option:
The menu contains the following options:
OSD Language: Change the ON Screen Display language. Subtitle language: Select
the subtitle language.
Audio language: If the program has multi-languages. Set your preference here.
F. System settings:
The menu contains the following options:
a) Parental Guidance: The options for setting up the age reference starts from
4 years to 18 years. To access this function you will require inputting a
code. The default password is “000000”. This function can also be deactivated
simply by setting it to OFF.
b) Set Password: It allows you to modify the default password, which is
“000000”.
c) Restore Factory Default: It allows you to restore the unit to its default
factory settings.
You will be asked to enter your password “000000”. Press the “OK” key once
done.
Note: This function will delete all your saved channels and your personal
settings. d)
Information: You can check the software version of your unit.
If corrective software updates are published on our website
www.newmajestic.com this function will allow them to be executed.
G. USB Settings:
The USB menu has 4 options:
(a)MULTIMEDIA:
While in TV mode, press the “USB” button to access the Multimedia menu. The
menu contains 3 different icons: Music, Photo, Movie.
The MUSIC option is used to play audio files, IMAGES is used to play image
files, and VIDEO is used to play video files.
Below is a list of playable video files:
Video codec: MPEG-2/4 (H.264) / VC-1 / HEVC (H.265)
Audio codec: MPEG-1 / MPEG-2 layerl / 11 / MP3 / AAC-LC / WMA / HE-AAC / WMA /
AC- 3 (Dolby Digitai) E-AC-3 (Dolby Digitai Plus)
Container: TS / MPG / MP4 / AVI / MKV
Resolution: 1080p l 1080i l 720p l 576p l 576i l 480p l 480i
Frames: MPEG-2/4 1080p @ 30fps / (H.264) l 1080p @ 60fps l HEVC (H.265) 1080p
@ 60fps
Image file: JPEG / PNG / BMP
Audio file: MP3 / WMA / AAC
This device supports USB sticks with FAT32 system files.
(b) Photo settings:
- Interval: set the slide show interval between 1-8 seconds.
- Type: set the slide show effect between 0-59 or random.
- Image report:
[Keep]: displays the image in its original appearance. [Reject]: Display the image on full screen.
(c) Video settings:
-
Subtitles:
subtitles in normal mode.
[Large]: Displays subtitles using large characters. -
Subtitle background:
subtitles on a transparent background. [Gray]: Displays subtitles on a gray background. [Yellow / Green]:
Displays the subtitles on a yellow/green background. -
Text color:
[Red]: displays subtitles in red character [Blue]: displays subtitles in blue character [Green]: displays subtitles in green font. [White]: Displays subtitles in white font. [Black]: displays subtitles in black font.
(d) USB device
This function is only available when a compatible USB device is connected to
the receiver.
Inside it you will find information on the file system, the total space, the
free space, and the space for Timeshift.
Troubleshooting
The below table is s list of common problems that may occur with your receiver.
fault| Possible cause|
---|---|---
Power on, but nothing displays red on the screen| Unit is not turned on at
mains switch| Ensure the power plug is plugged into the wall socket and the
switch is on
TV picture drops out and thru unit displayers “NO signal”| The antenna is not
properly connected or you are in a bad reception area| Talk to your local TV
antenna technician about reception problems in your area and whether a new
antenna would
Receiving digital TV but missing some channels| The antenna is not properly
connected or you are in a bad reception area| Talk to your local TV antenna
technician about reception problems in your area and whether a new antenna
would
The Remote is not working| Batteries are flat or there is interference| Talk
to your local TV antenna technician about reception problems in your area and
whether a new antenna would
SPECIFICATIONS
TUNER
Input connector| IEC16902.Female
Input Frequency range| VHF&UHF
Num of RF input| 1
Input impedance| 75ohm
RF output connector| (Bypass)IEC 169-2 male
Loop through| 177.5-866MHz
Demodulation
Standard| ETSU EN300 744
Guard interval models| 1/32, 1/16, 1/8 active symbol duration
FEC Modes rate| 1/2,2/3,3/4,5/6.7/8
Carriers/constellation| All modes supported including nonhierarchical
Demodulation| COFDM (QPSK/QAM16/QAM64/QAM256)2k and 8K.
Video decoder
Stand| ISO/IEC 13818-2 and ISO/IEC 14496-10
Transport stream| ISO/IEC 13818-1
Video decoding| MPEG-2 SD/HD (MP@ML and MP@HL),
MPEG-4 H.264/AVC H.265/HEVC SD/HS DIVX 4.X~5.X
JPEG, B M P, PNG, MOTION JPEG
Aspect ratio| 4: 3/16:9
AUDIO DECODER
Standard| SO/IEC13818-3 TR1011154
Audio decoding| MPEG-1 and MPEG-2 layer 1 &11, HE-AAC digital audio
Dolby digital (AC-3)| Stereo down-mixing to analog and digital audio outputs
(Including HDMI).For digital outputs, L-PCN stereo encoding
Is provided
Sample rate| 32KHZ, 22.1KHZ, 44.1KHZ, 48KHZ
Subtitle
Subtitle| DVB subtitle
Power
AC input range| AC 100 – 240V 50/60Hz DC IN 5V/1A
Power consumption| <8w
Standby consumption| 0.5w
INFORMATION TO USERS OF DOMESTIC EQUIPMENT
Pursuant to Art. 25, Paragraph 1 of the Legislative Act N. 49 14th March 2014,
“Implement of the Directives 2011/65 / EU and 2012/19 / EU concerning the
reduction of the use of hazardous substances in electrical and electronic
equipment, as well as waste disposal”.
The crossed bin symbol on the appliance or on its packaging indicates that the
product at the end of its useful life must be collected separately from other
waste. The user must, therefore, dispose of the equipment at the end of its
life at the appropriate electronic and electro technical waste centers, or
return it to the retailer at the time of purchase of a new type of equivalent
equipment, one by one.
Appropriate separate disposal for the subsequent start-up of the disused
equipment for recycling, treatment, and compatible environmental disposal
helps to avoid possible negative effects on the environment and health and
favors the re-use and/or recycling of the materials it is composed of the
equipment.
The illegal disposal of the product by the user involves the application of
the penalties referred to in current laws.
Any rechargeable batteries or rechargeable batteries contained in the device
must be disposed of separately in the appropriate expired batteries bins.
Battery disposal
Disposal of expired batteries must take place at the appropriate recycling
centers or according to local authorities. Batteries in compliance with the
2013/56/EC directive. Warning: the battery may explode if replaced incorrectly
if exposed to heat or water. Do not cause a short circuit. Replace the battery
only with an equivalent. Do not place
the battery in direct sunlight or in places excessively hot (over 40 ° C). use
only with the adapter provided by the manufacturer. Do not hit or press the
battery.
| Class II, double insulation
---|---
| WEEE Logo (Waste electrical and electronic equipment)
| Battery disposal
| Indoor use
| Dangerous voltage
Eco-contributo RAEE assolto
ove dovuto – N° Registro AEE: IT08020000001647
Eco-contributo PILE assolto ove dovuto – N° Registro PILE: IT19070P00005533
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>