ELNUR GABARRON G Control Hub USB User Guide
- June 6, 2024
- ELNUR GABARRON
Table of Contents
ELNUR GABARRON G Control Hub USB
INSTALLATION
A G Control Hub is needed to control the G Control devices installed in your home (SSH Ecombi storage heaters, radiators, thermostats, energy meters…) using the internet or a Smartphone app. The G Control Hub USB communicates by radiofrequency with the heaters and it is connected to the home router using the Wifi Network.
Register in the app-web
Registering and creating a user account is required for remote control of your installation via internet. If you do not have a user account in Elnur Wifi Control, the first step is to register in the portal using the website https://remotecontrol.elnur.es or using the app Elnur Wifi Control available in App Store for IOS and Play Store for Android. Enter a valid mail address that must be verified and a password. An email will be automatically sent to your inbox to verify the registered e-mail.
G Control Hub USB Installation
Connect the G Control Hub USB Smartbox to any USB Port. Can be the router
USB port or any other like a phone charger.
New Home. Adding a new G Control Hub USB
To control remotely your installation, you must link your G Control Hub with
your registered user account. Several G Control Hubs can be associated to the
same registered user account in order to control different installations if
necessary. To associate G Control Hub with your user account, you must enter
on the “Homes” → “New Home” menu available on the right pop up menu of the
website or the mobile app and follow the instructions of the installation
wizard.
Set the name and the time zone of your new home.
Choose the device type: Wifi Smartbox and follow the instructions of the installation wizard.
Set the Wifi network that the G Control Hub USB is going to connect to. In the next step, go to the phone Wifi configuration and connect to the Wifi network Smartbox_XXX. No password is needed.
If the phone asks if you want to keep the connection because the network has not Internet access, click YES. Then, go back to the app, the device will be detected automatically.
Finally, the app asks for the G Control Hub name. This name may be different than the Home name, and will only be used in case you link more than one G Control Hub devices to the same Home. The last step is the automatic registering of the unit, this process may take several seconds. When it reaches 100% the installation is finished.
Heaters linking process
It is required to link by radiofrequency the different heaters with the G
Control Hub to control them remotely through the website and mobile app.
Warning G Control Hub is only compatible with heaters equipped with a G
Control system. To add new heaters, press the “Install” button in the main
screen of the app, select the type of heater that is going to be installed and
follow the instructions of the installation wizard.
G CONTROL HUB RESET. CHANGING THE WIFI
Changing the Wifi Network.
Follow the next instructions to change the Wifi Network, for example, after
changing the user router. Go to the Homes menu available on the right top
popup menu and select the home name that you want to set. Then, go to
Configure Wifi and click next. A new wizard starts wit the same steps seen in
section 1.c New Home. Adding a new G Control Hub USB of this manual
G Control Hub USB Reset
G Control Hub USB can be reset using the button of the unit:
- Keep pressing the button for 10s to reset the configured Wifi Network.
- Keep pressingZ the button for 20s to remove all the installed heaters (radiators, storage heaters…)
TECHNICAL FEATURES. LED STATUS
| Power Supply | USB. 5V 500mA |
|---|---|
| Energy Consumption | 300 mA |
| Radiofrequency configuration | 868MHz |
| Wifi Network compatibility | 2,4GHz |
LED status. Connection
| LED Status | Description |
|---|---|
| Red Blinking | Wifi network is not configured |
| Red – Orange blinking fast | Not connected to the router |
| Orange 2,5s – Red 0,5s | Not connected to the server |
| Orange 2,5s – Green 0,5s | Connection ready |
MOBILES APP – WEB APP
Download free the app Elnur Wifi Control for IOS and Android available on
Google play and App Store, or use the website
https://remotecontrol.elnur.es from any
device connected to the internet, to control your G Control Hub and the
devices associated.
Help is available at the bottom left of the web-app, which will guide you in handling the app and will help you to control your heating G Control system in an easy and intuitive way.
The symbol on the product or in its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. These instructions are only valid in the EU member states.
ELNUR S.A.
Travesía de Villa Esther, 11 28110 Algete – Madrid
Tfno. Atención al Cliente: +34 91 628 1440
www.elnurgabarron.es
www.elnurgabarron.com
www.elnur.co.uk
As a part of the policy of continuous product improvement Elnur, s.a. reserves the right to alter specifications without notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>