TELETEK SensoIRIS WS Intelligent Analogue Addressable Fire Alarm Sounder and Strobe Instruction Manual

June 9, 2024
Teletek

TELETEK SensoIRIS WS Intelligent Analogue Addressable Fire Alarm Sounder and Strobe Instruction Manual
TELETEK SensoIRIS WS Intelligent Analogue Addressable Fire Alarm Sounder
and Strobe

Installation Instruction

ATTENTION: Read carefully this installation Instructions before installing the device! This manual is subject to change without notice

SensoIRIS WS is аn addressable Wall Mount Sounder and Strobe designed for installing in addressable fire alarm systems supporting TTE communication protocol. The device is powered on from the panel and can be controlled via the communication protocol

The sounder SensoIRIS WS is compatible with fire bases B124 for ceiling or wall mounting and WSB IP65 for wall mounting (refer to manual 18020861 for details).

Dimentions

Dimentions

Attention: Power off the loop circuit before installing the SensoIRIS WS addressable sounder

  1. Choose the proper place for installation of the device
  2. Set the device address using SensoIRIS Programmer or directly from addressable fire panel. The address must be in the range from 1 to 250.
  3. Mount the fire base on the ceiling or on the wall of the protected premises using fixings according the mounting surface.
  4. Connect the base to the fire panel using the wiring diagram.
  5. Insert the device into the base and rotate clockwise until it drops into place – the short mark on the base fits with that on the sounder body. Continue to rotate the sounder until its mark coincides with the long mark on the base – a click is heard.
  6. Program the device parameters. Choose in consecutiveness from the control panel: System – Programming – Devices – Loop. Find the installed sounder, as enter address, loop and zone number – the panel automatically will recognize the type of the device. Choose the button MORE to enter in the additional settings menu
  7. Test the sounder for proper operation.

Warranty

All devices carry on a warranty valid from the date of manufacture. The date of manufacture can be checked by the code marking on the back of the device. The date is printed numbers – YY MM. The first two numbers represent the year and the last two – the month. For example: The date code “20 07”, means the device is manufactured in July, 2020. To return goods for warranty service, please contact with your local distributer for details.

Technical Specifications

Operating Voltage Range
Nominal consumption (stand-by

Maximal consumption (main tone type 27):

  • low volume level
  • high volume level

Maximal consumption (other tone types):

  • low volume level
  • high volume level.

Power volume (main tone type 27

  • low volume.
  • high volume*

Power volume (other tone types

  • low volume
  • high volume
    Number of tone types
    Supported communication protocol
    Wire Gauge for terminals Relative humidity resistance
    Color
    Material (transparent
  1. Base B124
    Base

  2. Address programming
    Note:
    You may also program the address directly from the fire panel
    Programming

  3. Mounting Base B124
    Mounting

  4. Mounting the sounder
    Mounting

Wiring Diagram

Wiring Diagram

Legend

RI – Remote Indicator
+Loop – Positive loop wire
-Loop – Negative loop wire
Earth – Earth point

Tone types and description

Tone Tone Type Tone Description / Application
1 970Hz
2 800Hz/970Hz @ 2Hz
3 800Hz – 970Hz @ 1Hz
4 970Hz 1s OFF/1s ON
5 970Hz, 0.5s/ 630Hz, 0.5s
6 ![Tone Type](https://manuals.plus/wp-
content/uploads/2023/03/Screenshot_12-266.png) 554Hz, 0.1s/ 440Hz, 0.4s

(AFNOR NF S 32 001)
7| | 500 – 1200Hz, 3.5s/ 0.5s OFF (NEN 2575:2000)
8| | 420Hz 0.625s ON/0.625s OFF (Australia AS1670 Alert tone)
9| | 500 – 1200Hz, 0.5s/ 0.5s OFF x 3/1.5s OFF (AS1670 Evacuation)
10| | 550Hz/440Hz @ 0.5Hz
11| | 970Hz, 0.5s ON/0.5s OFF x 3/ 1.5s OFF (ISO 8201)
12| | 2850Hz, 0.5s ON/0.5s OFF x 3/1.5s OFF (ISO 8201)
13| | 1200Hz – 500Hz @ 1Hz (DIN 33 404)
14| | 400Hz
15| | 550Hz, 0.7s/1000Hz, 0.33s
16| | 1500Hz – 2700Hz @ 3Hz
17| | 750Hz
18| | 2400Hz
19| | 660Hz
20| | 660Hz 1.8s ON/1.8s OFF
21| | 660Hz 0.15s ON/0.15s OFF
22| | 510Hz, 0.25s/ 610Hz, 0.25s
23| | 800/1000Hz 0.5s each (1Hz)
24| | 250Hz – 1200Hz @ 12Hz
25| | 500Hz – 1200Hz @ 0.33Hz
26| | 2400Hz – 2900Hz @ 9Hz
27| | 2400Hz – 2900Hz @ 3Hz ( 2500Hz – main sound frequency/ Hauptfrequenz / основна честота)
28| | 800Hz – 970Hz @ 100Hz
29| | 800Hz – 970Hz @ 9Hz
30| | 800Hz – 970Hz @ 3Hz
31| | 800Hz, 0.25s ON/1s OFF
32| | 600Hz – 1100Hz, 2.6s/0.4s OFF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Teletek User Manuals

Related Manuals