ATEN VC486 VanCryst 12G-SDI to HDMI Converter User Guide
- June 6, 2024
- Aten
Table of Contents
ATEN VC486 VanCryst 12G-SDI to HDMI Converter
© Copyright 2021 ATEN® International Co., Ltd.
ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All
rights reserved. All other trademarks are the property of their respective
owners.
This product is RoHS compliant.
Part No. PAPE-1223-T60G Released: 01/2021
Package Contents
- 1 VC486 12G-SDI to HDMI Converter
- 1 Power Adapter
- 1 HDMI LockPro
- 4 Foot Pads
- 1 User Instructions
Hardware Review
Front View
- HDMI Output Status LED
- SDI Input Status LED
- Power LED
Rear View
- Power Jack
- Firmware Upgrade Port
- Audio Channel Switch
- HDMI Output Port
- SDI Input Port
- SDI Output Port
- Audio Output Ports
Hardware Installation
- Use an HDMI cable to connect an HDMI-enabled monitor to the HDMI Output Port on the VC486.
- Use a coaxial cable to connect an SDI source device to the SDI Input Port on the VC486.
- Use a coaxial cable to connect to an SDI display device or SDI router to the SDI Output Port on the VC486.
- Connect your audio output device (e.g. speakers) to the Audio Output Ports on the VC486.
- Plug the provided power adapter into an appropriate power source; plug the power adapter cable into the Power Jack on the VC486.
- (Optional) Use the Audio Channel Switch to switch your audio output channel.
- Check that the Power LED, HDMI Output Status LED, and SDI Input Status LED light green to indicate that the VC486 is receiving power and ready to operate.
Support and Documentation Notice
All information, documentation, firmware, software utilities, and
specifications contained in this package are subject to change without prior
notification by the manufacturer.
To reduce the environmental impact of our products, ATEN documentation and
software can be found online at http://www.aten.com/download/
Technical Support www.aten.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>