SOMOGYI ELEKTRONIC NVE 3-USB Recessed Hub with USB Charging Sockets Instruction Manual
- June 6, 2024
- SOMOGYI ELEKTRONIC
Table of Contents
SOMOGYI ELECTRONIC NVE 3-USB Recessed Hub with USB Charging Sockets
RECESSED POWER STRIP WITH USB CHARGING PORTS
Before using the product for the first time, please read the instructions for use below and retain them. The original instructions were written in the Hungarian language.
FEATURES
- 3 grounded sockets with child protection
- 230V~ / 50Hz / max. 16A / max. 3680W
- cable length: 1.4m
- 2 x USB charging ports: 5V / 2.4A TOTAL
INSTALLATION
- Drill a hole with a diameter of 60mm into the top of the desk. When choosing the location of the hole, please take into account that the power strip extends downward from the top of the desk by 340mm and the cable exits the power strip on its bottom side.
- Unscrew and remove the fixing nut, place the power strip into the hole from the top, then fix it using the nut on the bottom side.
- Connect the power strip to a traditional 230V~/50Hz grounded power plug.
USE
- To elevate the power strip: Follow the steps shown on Figure 2.
- To recess the power strip: push the top of the power strip downward with a steady motion then let the power strip sink into the top of the desk.
WARNINGS
- Unless disconnected from the power source, always consider the power strip to be under voltage.
- The total power of the devices connected to the 3 x 230V ports must not exceed 3680W.
- Can only be used inside, under dry conditions!
- Make sure that no liquid or object is able to enter the product through the openings.
- Never attempt to disassemble the product; leave repairs to professionals.
- It is forbidden to use the device when covered!
- Only clean the product using a dry, soft fabric!
Caution: Risk of electric shock! Do not attempt to disassemble of modifying the unit or its accessories. In case any part is damaged, immediately power off the unit and seek the assistance of a specialist.
In the event that the power cable should become damaged, it should only be replaced by the manufacturer, its service facility or similarly qualified personnel.
PRODUCT SPECIFICATIONS
Data of the external power supply
- Name or trade name of the manufacturer:………………… Somogyi Elektronic Kft.
- Modell:…………………………………………………………………. NVE 3 USB (PMS-GEK-03SU2)
- Input voltage:………………………………………………………… 100-250V~
- Frequency of AC input:…………………………………………… 50 / 60Hz
- Output voltage:……………………………………………………… 5.0V
- Output current:………………………………………………………. 2.4A
- Power output:……………………………………………………….. 12W
- Average efficiency measured while active:………………… 80.5%
- Efficiency under low load (10%):……………………………… 67.5%
- Energy consumption when not in use:………………………. 0.09W
DISPOSAL
Waste equipment must be collected and disposed of separately from household waste because it may contain components hazardous to the environment or health. Used or waste equipment may be dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical nature and function. Dispose of product at a facility specializing in the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any questions, contact the local waste management organization. We shall undertake the tasks pertinent to the manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.