TVT DIGITAL TD-E2223 Video Intercom Door Station User Guide
- June 13, 2024
- TVT DIGITAL
Table of Contents
DIGITAL
TD-E2223
Video Intercom Door Station
Quick Start Guide
TD-E2223 Video Intercom Door Station
About This Manual
All pictures, images, icons and snapshots in this manual are for reference
only. If there is inconsistency between the manual and the actual product, the
actual product shall prevail. The manual will be updated according to the
product improvement and are subject to change without prior written notice.
Legal Disclaimer
To the maximum extent permitted by applicable law, the product described, with
its hardware, software, software and firmware, is provided “as is”, with all
faults and errors, and our company makes no warranties, express or implied,
including particular purpose, and non-infringement of third party. In no event
will our company, offices, or agents be liable to you for any special,
consequential, incidental, or indirect damages, including, among others,
damages for loss of business profits, business interruption, or loss of data
or documentation, in connection with the use of this product, even if our
company has been advised of the possibility of such damages.
With regard to the product with internet access, the use of product shall be
wholly at your own risks.
Our company shall be irresponsible for abnormal operation, privacy leakage or
other damages resulting from cyber attack, hacker attack, virus inspection, or
other internet security risks; however, our company will provide timely
technical support if necessary.
During the use of the device, pleas strictly abide by applicable law. In the
event of any conflicts between this manual and the applicable law, the later
prevails.
Installation and Use
Please use our product according to the following safety instructions and
warnings.
Do not place the camera in extremely hot, cold, dusty or damp location.
Do not expose it to high electromagnetic radiation.
If the product does not work properly, please contact your dealer or the
nearest service center.
Never attempt to disassemble the camera yourself. (We shall not be responsible
for any problems caused by unauthorized repair or maintenance.)
Do not drop the camera or subject it to physical shock.
Keep away from liquid while in use.
Do not touch the screen with sharp objects.
If cleaning is necessary, please use clean cloth to wipe it gently, avoiding
water or alcohol.
Package
Overview
Cable Connection
Note:
*The wiegand terminal here is a wiegand input terminal. If you want to connect to an access controller, you shall set the wiegand direction to “Output”.
Installation
Ambient Illumination Requirement
Make sure faces can be captured clearly.
Avoid direct sunlight and backlight .
The device should be at least 2 meters away from the light, and at least 3
meters away from the window or door. Installation Height Requirement
The recommended installation height (H) is 1.45m. It can be adjusted according
to the actual scene. The ideal face recognition distance ranges from 0.3m to
1m. The human height range at different distance
| D | Human Height Range |
|---|---|
| 0.3m | 1.4~1.65m |
| 0.5m | 1.25~1.80m |
| 1m | 0.9~2.10m |
Network Connection
Wired Network Connection
-
Make sure that the device and the PC are well connected via LAN.
-
Get the IP-Tool from the supplier and then install it in the computer.
After that, run the IP-Tool as shown below. -
Double-click the camera listed in the IP-Tool to connect IP camera. The default IP address of this camera is 192.168.226.201.
Note: Please make sure the camera and the computer are in the same local network. -
Read the privacy statement and then activate the device. The default username is admin. You need to self-define the password.
Then set the security questions and answers. It is important for you to remember these answers, or you will not be able to reset your password. -
Follow directions to download and install the plugin if prompted. Available Web Browser: IE(plug-in required) /Google Chrome/ Firefox/Safari/Edge
It is recommended to use the latest version of the above browsers.
Wi-Fi Connection
- Use the network cable to connect the device and wireless router or AP.
- Connect to the above wireless network with your PC. Then install and run the IP-Tool on your PC and then find the IP address of the device. The default IP address of this device is 192.168.226.201. Double click it. This will bring you to the login interface of the camera. Enter the username and password to log in.
- Click “Config”→ “Network”→ “WIFI” to go to the following interface. Check “Enable” to enable Wi-Fi. Then click “Search” to refresh the wireless device list. Select the desired router, enter the key number and select encryption type. After that, select “Obtain an IP address automatically” or manually enter the IP address by clicking “Use the following IP address”. Then click “Save” to save the settings.
- Pull the network cable out of the device. Then you will see the network connection icon ( ). This means WI-FI is connected.
- Run the IP-Tool and find the device through IP address or MAC address. Then double click it listed in the IP-Tool or enter the IP address of the device in the address bar of the web browser to access the device.
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection againstharmful interference in a
residential installation. This equipment generates, uses and can radiateradio
frequency energy and, if not installed and used in accordance with the
instructions, maycause harmful interference to radio communications. However,
there is no guarantee thatinterference will not occur in a particular
installation. If this equipment does cause harmfulinterference to radio or
television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try to correct the interference by one or more
of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
DIGITAL
Documents / Resources
| TVT
DIGITAL TD-E2223 Video Intercom Door
Station
[pdf] User Guide
TD-E2223, TD-E2223 Video Intercom Door Station, Video Intercom Door Station,
Intercom Door Station, Door Station
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>