SOMOGYI ELEKTRONIC DP 11 Stage Horn Tweeter Instruction Manual
- June 3, 2024
- SOMOGYI ELEKTRONIC
Table of Contents
DP 11
instruction manual
DP 11 Stage Horn Tweeter
Maximum power | Pm / W | 120 |
---|---|---|
Nominal power | Pn / W | 60 |
Nominal impedanz | Z / Ohm | 8 ±20% |
Frequency range | f / Hz | 2.000-18.000 |
Sensitivity (1W/1m) | Spl / dB | 93 |
Voice coil diameter | mm | 25. |
Spool | raw mat. | kapton |
Cone material | raw mat. | textile bakelite |
Magnet dimensions | mm | 10 x 070 |
Magnet weight | Oz | 10 |
Front panel size | mm | 86 x 86 |
Mounting diameter | mm | 65 |
Weight | kg | 0.39 |
STAGE HORN TWEETER
WARNINGS
-
Before use of the product, please read this instructions manual and keep it for future reference. The original document was prepared in Hungarian language. This appliance can be used by children aged 8 years or above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, provided
that they are supervised or have been given instructions concerning the use of the appliance and understand the hazards involved. Children may not play with the appliance. Children may perform the cleaning or user maintenance of the appliance subject to supervision. After removal of the packaging, inspect the product for possible damage during shipment. Keep the packaging away from children if it contains plastic bags or other potentially hazardous items. -
Due to the significant weight of the magnet, the plastic part holding it may sometimes break after installation in the speaker box. We recommend supporting the magnet in the speaker box, especially if it will be moved or transported. Vibrations during transport or harsh placement on the ground may cause a shock damaging the built-in tweeter.
-
Avoid connecting or disconnecting cables during use. Otherwise, the resulting noise burst can damage the speakers.
-
Protect the device from dust, humidity, liquids, moisture, frost and shocks, as well as from direct heat and sunlight.
-
Only for use under dry, indoor conditions.
-
Prevent foreign objects from entering the device through its openings.
-
In case of a malfunction, disconnect the appliance and contact a specialist.
-
The speakers contain magnets, so do not place sensitive products (e.g., credit card, tape recorder, compass…) in their vicinity.
-
Incorrect installation or unprofessional use will void the product warranty.
-
This product is for private use, it is not intended for industrial applications.
-
After the useful life of the product, it is to be considered as hazardous waste. Dispose of the product according to local legislation.
-
Due to continuous improvements, technical data, operation
and design are subject to change without notice. The most recent instructions manual is available for download from the www.somogyi.hu website. -
However we regret such inconvenience, we do not take any responsibility for possible printing errors.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
DISPOSAL
Waste equipment must be collected and disposed separately from household waste
because it may contain components hazardous to the environment or health. Used
or waste equipment may be dropped off free of charge at the point of sale, or
at any distributor which sells equipment of identical nature and function.
Dispose of product at a facility specializing in the collection of electronic
waste. By doing so, you will protect the environment as well as the health of
others and yourself.
If you have any questions, contact the local waste management organization. We
shall undertake the tasks pertinent to the manufacturer as prescribed in the
relevant regulations and shall bear any associated costs arising.
APPLICATION
This product requires installation by a professional. Due to their special
design, speakers require careful handling. All speakers should be run in
before normal use. During the
first 15 to 20 hours of operation, the sound system should be used at maximum
50% capacity. It is then that the factory rated characteristics and sound
quality can be achieved.
CROSSOVER
Connect only such a frequency band to the speaker that it can play. It is your responsibility to provide for the incorporation of an appropriate cross-over. When selecting it, make sure to take into account the speaker and amplifier specifications.
AMPLIFIER
Use only an amplifier of the appropriate quality and power! When the volume is
increased, amplifiers of lower power may produce significant distortion, which
may damage
the speaker. Excessive power can also overload and cause damage to the
speaker. This is a typical sign of unprofessional and improper use! Make sure
that the impedance and power specifications of the amplifier and the speaker
are appropriate for their connection. The peak power of the speaker should be
at least 50% higher than the peak output power of the amplifier. Note that the
output power indicated on the amplifier is always meant with the equalizers
turned off. Depending on the equalizer setting, the speaker load may be
several times higher at a certain frequency, which may damage the speaker. For
this reason, it is recommended to oversize the capacity of the speaker.
PUTTING INTO USE
Take utmost care of the correct +/- polarity, and connect the speaker cord. (The connector with (+) polarity is marked.) During this time, make sure that the amplifier is turned off. The recommended cross-sectional dimensions of the cable should be at least 2 x 0.5… 0.75 mm². Before switching on for the first time, check the entire sound system for proper connection and that the volume control is in the minimum position. In order to avoid knocking of the speakers, do not make any cable connections during operation. Never switch on the system at high volume settings. The sudden noise possibly occurring may immediately damage your speakers. Should any indicative sign (strange smell, distorted sound, …) arise, immediately switch off the amplifier! By doing so, you can often prevent damages to the speakers. Malfunction due to overload attributable to the improper or unprofessional use of the speaker will not be covered by warranty or guarantee.
CLEANING
Before cleaning, disconnect the amplifier. Use a soft, dry cleaning cloth. Avoid the use of any aggressive detergents and liquids.
MAINTENANCE
From time to time, check if the sound is free of distortion and that the wires
are connected firmly, free of short circuit. In case of a malfunction, stop
using the appliance and
contact a specialist.
producent
Distribuitor: S.C. SOMOGYI ELEKTRONIC S.R.L.
J12/2014/13.06.2006 C.U.I.: RO 18761195
Cluj-Napoca, judeţul Cluj, România,
Str. Prof. Dr. Gheorghe Marinescu, nr. 2, Cod poştal: 400337
Tel.: +40 264 406 488,
Fax: +40 264 406 489
• www.somogyi.ro
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>