belkin WIA005 Magnetic Portable Wireless Charger Pad Instructions

: June 6, 2024
: belkin

Table of Contents

Safety Instructions
FCC Statement
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

belkin WIA005 Magnetic Portable Wireless Charger Pad Instructions

Safety Instructions

WARNING: Failure to follow these instructions could result in fire, electric shock, injury, or damage to the user, product, or other property.

Connect the wall adapter of the wireless charger into a power outlet that is close by and is easy to disconnect from the source.
Use indoors and in a dry location only; Avoid charging near sources of heat and humidity.
Keep the wireless charger and wall adapter away from any liquids or moisture.
Unplug the wireless charger when not in use for long periods of time.
Do not store your device in very hot or very cold locations. It is recommended to use your device at room temperature.
Do not use if visible defects are observed on the wireless charger or wall adapter.
Do not attempt to service, modify, or disassemble the wireless charger or wall adapter.
Use of a wall adapter not recommended or sold by Belkin may result in an increased risk of fire, electric shock, injury, or damage to the user, product, or other property.
Keep this device out of reach of children to prevent them from playing with it.

CAUTION: If you experience problems with the wireless charger, please discontinue use, unplug the wall adapter from the AC socket, and contact Belkin for assistance.

The marking information is located on the bottom of the apparatus.

FCC Statement

DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY

We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094, Tel: +1(310) 751 5100, declare under our sole responsibility that this product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Federal Communications Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the distance between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions as documented in this manual. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body

Innovation, Science, and Economic Development Canada Statement (ISED):

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

Innovation, Science and Economic Development Canada Statement:

This digital apparatus complies with CAN ICES-3(B)/NMB-3 (B).

Information for end-users as per COMMISSION REGULATION (EU) 2019/1782

Manufacturer’s name or trademark. commercial registration number and address| Zhenlong East Road No.b. Jiaoyitang. Tangxia Town. Dongguan. Guangdong. P.R. China. 523723
Model identifier| A829-120167C-EU1. A829-090323C-EU1. A829-050300C-EU1
Input voltage (unit: V)| 100-240 Vac
Input AC frequency (unit: Hz)| 50-60Hz
Output voltage (unit: V)| 5.0V DC. 9.0V DC
Output current (unit: A)| 2.8A. 3.0A
Output power (unit: W)| 20.0W. 25.0W
Average active efficiency (unit: %)| 88.5% min
Efficiency at low load (10%) (unit: %)| 83.8% min
No-load power consumption (unit W)| 0.02W
The above information is also available as part of EU declaration of conformity at the following Internet address: www.belkin.com/doc.

Waste Electrical and Electronic Equipment Directive
Disposal Information for User

Pursuant to and in accordance with Article 14 of the Directive 2012/19/EU of the European Parliament on waste in electrical and electronic equipment (WEEE). The barred symbol of the rubbish bin shown on the equipment indicates that at the end of its useful life, the product must be collected separately from other waste.
Therefore, any product that has reached the end of its useful life must be given to waste disposal centers specializing in separate collection of waste electrical and electronic equipment, or given back to the dealer when purchasing a new WEEE, pursuant to and in accordance with Article 14 as implemented in the country.
The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimizes the recycling and reuse of components making up the electronic equipment.
Abusive disposal of the product by the user involves application of the administrative sanctions according to the laws in force. For information on product disposal, please refer to http://www.belkin.com/uk/weee-regulations/