onvis S3EU Smart Plug User Manual
- June 6, 2024
- Onvis
Table of Contents
onvis S3EU Smart Plug
Quick Start Guide
iOS (Apple Homekit)
-
Long press the button for 10 seconds to reset The blue LED blinks slowly after reset
-
Make sure your iOS device {iOS12.1 or later) is connected to a 24GHz Wi-Fi network. Shut down 5GHz Wi-Fi network
-
Download and open the thefreeOnvis Home app from the App Store. Tap ‘skip’ to use HomeKit directly, or login/sign up an Onvis account for more services of champion Smart Home System
-
Tap ·+• on the top right comer and scan the HomeKit QR code to set up the device.
Note: When QR ccx: Les scanning is NOT applicable, select the target device (last 6 digits matching the MAC address), and manually input the SETUP code printed on the cover page -
If the app prompts ‘Couldn’t add Onvis-XXXXXX”, please reset and re-add the device. Please keep the QR code for fun. Joe use
-
Assign the device to a room, name it, and use this name to control with Si RI , This smart plug can be integrated intoyourHomeKitscenes and automation
-
The use of a Home Kit-enabled accessory needs the following pelTI’liSSll’.’>liS’
- Settings>iCloud>iCloud Drive>TurnOn
- Settings>iCloud>Ke\,(:hain>Turn On
- Settings>Privacy>Homel
Dnvis Home>TumOn - For troubleshooting visit www.onvistech.com/page-1717.html
Smart Plug Overview
• Power Button
Manually turn on or off the power plug by single pressing the power button
• Restore Factory Settings
Press and hold the reset button for about 10 seconds. When the blue LED
indicator blinks slowly, the device has been restored to factory settings.
• Wi-Fi Connection Indicter
Blue LED blinks slowly: Smart Plug is ready for Wi-Fi network configuration
Blue LED blinks fast: The Wi -R connection is lost
• Power Indicator (after Configuring Wi-Fi)
Blue LfD solid on The power plug is “on» Blue left off: The power plug is
“off”.
• Power Meter and Records
The Onvis Home app shows the real-time output power and historic records.
• Timers and Count Down Timers
In the Elvis Home app, timers can be set to turn on/off once or regularly
Count down timer can be set to turn on/off once when time (seconds) is up
• Outlet in Use
The S3EU plug detects the plug-in status of the outlet.
• Electric Shock Protection
The outlet protecting shutter prevenl5 accidental electric shock.
Electrical Ratings
- Rating: 23rN-, lOA, SOHz, 2300W
- Intended environment: Indoor
- Amblenttemperature: 35’C max
- CNervoltage category: II
- Circuit di:,connection: Micro diKonnection
- Glow-wire temperature: 650t
- Cooling condition: Not requiring forced cooling Internal protector: lOA built-in type non-replaceable fuse
Wi-Fi Specification
- WI-Fl: BO: Z.1 1 b/g/n, 2.4GHz ONLY (5GHz NOT supported)
Safety Warnings
- Indoor use only
- Keep children away from Smart Plug
- Remove Smart Plug from outlet before dean ng
- Plug di recHy into the electric outlet (not into extent:m cord)
- DO NOT dean with liquid
- DO not use investor damp areas
- DO NOT exceed the recommended electrical ratings
- DO NOT use with devices that should not be operated unattended
- DO NOT use I n precision timing applicati01s where inaccurate timing could be dangerous (sunlamp, saunas, etc.)
HomeKit Hub Setting
An Apple device as a HomeKJt hub (iPad/ Apple lV /HomePod) is necessary to enable remote control and notification. Fi nd instructions: www.om.istech.com/page-1718.html
FAQ
Why did I fail to set up my Onvis Smart Plug S3EU to Home app or Onvis Home app?
- Shut down the 5GHz Wi-Fi network and connect your iOS device to the 2.4GHz Wi-Fi network. If possible, use a 2.4GHz single-band router.
- Reset the S3EU. plug it into a power slot and keep it within effective range of the 2.4GHz network. When the blue LED blinks slowly, scan the setup code to set up the S3EU.
- If the app prompts ‘Couldn’t add the device’ after scanning the setup code, try delete the device from the Home app if it was added before;
- delete the current ‘Home’ in Home Settings and close the app
- restore the accessory to factory settings;
- add the accessory again.
S3EU works normally after restoring factory settings and correct configurations, but it occasionally gets disconnected from the network and cannot be recognized.
Try:
- Check and update the firmware of S3EU and the HomeKit hub.
- If many wireless networks overlap in the installation spot, it might cause network congestion and interference. Move to a spot where network congestion and interference is less, or wait till tile network works normally
- Make sure the number of Wi-Fi-connected devices is within the wireless network capacity of your router. Otherwise, please use a 2.4GHz router that offers a higher capacity
- Reconnect your iOS devices to Wi-Fi and make sure the Wi-Fi signal is strong enough.
- Power cycle or reset 53EU, add the device with the OnVls Home app.
Legal
Use of the ‘Narks with Apple badge means that an aa: accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple’s perforrnilnce 51:andards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Controlling this HomeKlt-enabled accessory automatically and. may from home requires a Home Pod, Apple TV; or iPad set up as a home hub. It is recommended that you update to the latest software and operate 5ystem To control this HomeKit–enabled accessory, the latest version ofiOS or iPadOS is recommended. Apple, Apple Watch, HomeKit, iPad, iPad Air, and iPhone are trademarks of Apple Inc
General Instructions
This product contains Inside small parts that might cause choking to children.
Keep the product away from children under three years old. little product
comes in a plastic bag package, dispose of this bag correctly, and take
actions ta prevent children from playing with it as It poses a risk of
suffocation to children. This product may become warm with normal u.se Please
make sure t:17e product Is adequately ventilated and securely positioned, and
do not place it ne; or other sources of heat (eg direct sunlight, radiators.
or similar) Unless otherwise stated. this product is for indoor use only and
must be maintained out of damp\humId conditions and other weather-related
influences such as rain, snow, and mist.
This product is not designed for use in any kind of machine, medical
equipment, or industrial applications. The product contains no user-
serviceable or exchangeable parts. Do not attempt to repair the product. Do
not dismantle the device or the AC adapter as tl1is may result in
electrocution or other dangers that may cause injury. If the device plastic
case, AC adapter, pins or terminals are damaged, stop using Q and dispose of
this product properly. Contact for our after-sales service if your product
malfunctions or is damaged
Conformity Declarations
- Shenzhen ChampOn Technology Co, Ltd hereby declares that where applicable this product meets basic requirements and other relevant obligations as set forth i n the following guidelines:
- 2014/35/EU Low voltage (replace 2006/95/EC) 2014/30/EU EMC Di .rective.
- 2014/53/EU Radio Equipment Directive [RED] 2011/65/EU, (EU) 2015/863 RoHS 2 Directive
- For a copy of the Conformity Declaration, visit www.onvistech.com This product is approved for use in European Union
Importer: Shenztien ChampOn Technology Co., Ltd.
- Address: Rm 628, Yi Ben Bldg, No.l 053 Cha Guang Rd, Nanshan, Shenzhen, China Manufacturer: Shenzhen ChampOn Technology Co. Ltd.
- Address: Rm 628, Yi Ben Bldg, No,l 053 Cha Guang Rd, Nash; m, Shenzhen, China
Disposal
This symbol indicates that it is unlawful to dispose of this product together with other household waste Please take it to a local recycling center for used equipment.