onvis C3 Indoor Smart Camera User Guide

onvis C3 Indoor Smart Camera

1. Insert a pin to press for 10 seconds to reset. The LED blinks red, green and blue after reset.
2. Make sure your i0S device (i0S 13.2 or later) is connected to a 5GHz or 2.4GHZ Wi-Fi.
3. Download and launch the free Onvis Home app from the App Store. Tap ‘skip’ to use HomeKit directly, or log in/sign up an Onvis account for more services. Or use the Apple Home App to set up and control.
4. Tap “+” on the top right corner and scan the HomeKit QR code to set up the device.
5. If the app prompts “Couldn’t add Onvis-XXXXX , please reset and re-add the device. Please keep the QR code for future use.
6. Assign the device to a room, name it and use this name to control with Siri. This smart camera can be integrated into your HomeKit scenes and automations.
7. The use ot a HomeKit-enable accessory needs the follow permissions:
8. Settings>iCloud=iCloud Drive»Turn On
9. Settings-iCloud=Keychain-Turn On
10. Settings>Privacy>HomeKit-Onvis Home Turn On
11. For troubleshooting visit: //www.onvistech.com/page-1717.html

Specifications

• Storage: iCloud (Homekit Secure Video), MicroSD card (up to 128G)
• Resolution: 1080p@30tps X4 (1 for iCloud recording, 2 for live streamings, 1 for MicroSD card)
• CMOS Sensor: Sony IMX Starlight sensor, 2M pixels
• Wi-Fi: 5GHz and 2.4GHz, 802.11 b/g/n/ac 2-Way Audio HDR
• Lens FOV: 134°
• Night Vision: Auto IR Cut, supreme quality
• Adapter: Input 100-240VAC, 50/60Hz, 0.2A; Output 5.OVDC, 1.2A, Type C
• Dimensions(WXDxH): 112x87x8Omm
• Operation Temperature: 0 C~40 C
• Operating Humidity: 10%~909% RH non-Condensing
• Storage Temperature:-20 C~70 C
• Storage Humidity: 5%-90% RH non-condensing
• Certifications: FCC, CE, ROHS

Features

Works with Apple HomeKit
Onvis C3 is compatible with Apple Homekit. Call out Siri in iOS devices or Apple Watch like, “Hey, Siri, show me the baby ROom to view a live stream wherever you are. Onvis C3 blends in with your Apple gadgets.

HomeKit Secure Video
Onvis C3 supports Homekit SeCure Video, enabling you to securely store activity detected by your cameras in ICloud. View live and recorded video from your Onvis C3 in the Apple Home app on your iPhone, iPad, or Mac.

No Extra Cloud Storage Fee
Onvis C3 shoots recordings on events, and stores videos on iCloud for free it an iCloud plan is registered. Once saved, the videos on iCloud can be reviewed and downloaded from the Home App and stored locally in your iOS devices. Onvis C3 supports local storage of up to 128GB in MicroSD card.

Uncompromising D Video
Onvis C3 shoots 1080p HD video at 30 fps in all4 streamings, 1 tor iCloud with 4 seconds pre-recording, 2 tor live streamings and 1 for MicroSD recording. The IMX starlight CMOS sensor presents color in extremely dim light and supreme quality night vision. HDR adds extra vividness in C3.

Privacy Secured
Onvis C3 protests your privacy with Homekit Secure Video(HSV). All data is encrypted before uploading to iCloud. The bank-level AES 256-bit encryption and Iransport Layer Security (I LS) ensures industry top data security.

Easy Setup
Power the camera, Scan the setup code and the Onvis C3 Camera will be set up in seconds.

Rich Notifications
An image in the notification to your iPhone and Apple Watch briefs the recording from the lock screen.

Motion Detection
Onvis C3 detects motions by image change. Accidents without human behavior, like a burst ot fire, will be recorded.

Smart Camera Overview

Restore factory settings
Insert a pin and press the reset button for about 10 seconds. The LED blinks red->green->blue when factory Settings is restored.

HomeKit Hub Setting
An Apple device as Homekit hub (IPad/Apple Iv/HomePod) is necessary to enable remote control and notification. Find instructions: http://www.onvistech.com/page-1718.html

FAQ

Why did I fail to set up my Onvis Smart Camera C3 to Onvis Home app?

1. Make sure your C3 is powered on and nearby.
2. Make sure your accessory’s red LED blinks before W-Fi setting. lt not, please reset the C3 and wait till the LED blinks red.
3. Select the C3 shown on screen, then scan the setup code which can be found on the device, instruction manual or inner packaging.
4. If the app prompts couldn t add the device” after your scanning the setup code
5. delete the currentHome” in Home Settings and close the app;
6. restore the accessory to tactory settings;
7. add the accessory again;

C3 works normally after restoring factory settings, but it occasionally gets disconnected from networks and cannot be recognized.

1. Make sure the number of Wi-Fi-connected devices is within the wireless network capacity of your router. Otherwise, please use a higher capacity router.
2. Reconnect your i1OS devices to Wi-Fi and make sure the WI-Fi signal is strong enough.
3. It your router performs poorly in wireless networks, it might result from network congestion. Wait until the network is fixed.
4. Check the router settings and see if there is a limit to the number ot simultaneous connections.
5. Restart or restore your C3 to factory settings, and add your device to the Onvis Home app.
6. Update the firmware to the latest version.

Legal
Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Apple, Apple Watch, HomeKit, iPad, iPad Air, and iPhone are trademarks of Apple Inc., registered in the U.S. and other COuntries. HomePod is a trademark ot Apple Inc. Controlling this HomeKit-enabled accessory automatically and away from home requires a HomePod, Apple TV, or iPad set up as a home hub. It is recommended that you update to the latest software and operating system. To control this HomeKit-enabled accessory, the latest version of iOS or iPad is recommended. Homekit Secure Video requires a supported iCloud plan and a HomePod with iOS 13.2 or later, Apple TV with tvOS 13.2 or later, or iPad with iPadOS 13.2 or later set up as a home hub.

General Instructions

This product contains inside small parts that might cause choking to children. Keep the product away from children under three years old. If the product comes in a plastic bag package, dispose of this bag Correctly, and take actions to prevent children from playing with it as it poses a risk of suffocation to children. This product may become warm with normal use. Please make sure the product is adequately ventilated and securely positioned, and do not place it near other sources of heat (e.g. direct sunlight, radiators, or similar). Unless otherwise stated, this product is for indoor use only, and must be maintained out of damp\humid Conditions and other weather-related intluences such as rain, snow and mist. This product is not designed for use in any kind of machine, medical equipment or industrial applications. The product contains no user-serviceable or exchangeable parts. Do not attempt to repair the product. Do not dismantle the device or the AC adapter as this may result in electrocution or other dangers that may cause injury. It the device plastic case, AC adapter, pins, or terminals are damaged, stop using and dispose of this product properly. Contact for our after-sale service it your product malfunctions or is damaged.

Conformity Declarations
Shenzhen Champon Technology Co., Ltd here by declares that where applicable this product meets basic requirements and other relevant obligation as set forth in the following guidelines:2014/35/EU low voltage Directive (replace 2006/95/EC)

Disposal
This symbol indicates that it is unlawtul to dispose of this product together with other household waste. Please take it to a local recycling center for used equipment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>