ONVIS K1 Kameleon LED Lightstrip User Manual

: June 5, 2024
: Onvis

ONVIS K1 Kameleon LED Lightstrip User Manual

Apple HomeKit – Full Function

Power up the K1 light strip with the enclosed power adaptor. Long press the power button for 10 seconds. K1 light strip blinks rainbow twice after reset.
Make sure your iOS device (iOS 14.1 or later) to a 2.4GHz Wi-Fi network.
Shutdown 5GHz Wi-Fi network when necessary.
Download and launch the free Onvis Home app from the App Store. Check and update firmware with Onvis Home. The iOS Home App can be used to setup and control.
Tap “+” on the top right corner and scan the HomeKit QR code to setup the device.
Note: When QR code scanning is NOT applicable, select the target device(last 6 digits matching the MAC address), and manually input the SETUP code printed on the cover page.
If the app prompts “Couldn’t add Onvis-XXXXXX”, please reset and re-add the device. Please keep the QR code for future use.
The use of a HomeKit-enable accessory needs the follow permissions:
Settings>iCloud>iCloud Drive>Turn On
Settings>iCloud>Keychain>Turn On
Settings>Privacy>HomeKit>Onvis Home>Turn On
Assign the device to a room, name it and use this name to control with Siri. This light strip can be integrated into your HomeKit scenes and automations.
Mount the light strip on a clearn dry surface. Do NOT twist at the ICs or LED beads.
For troubleshooting visit http://www.onvistech.com/page-1717.html

Home Hub

A customer who owns an Apple TV (4th generation or later) with tvOS 14.1 or later, an iPad with iOS 14.1 or later, or a HomePod mini/HomePod can control HomeKit-enabled accessories away from home and automatically through triggers such as time of day, location, sensor detection, or the action of an accessory. You may find the instruction for HomeKit hub setting here:
http://www.onvistech.com/page-1718.html

Android / Amazon Alexa / Google Assistant / Cloud Intelligence

Onvis K1 supports SIMPLE control of On/Off, color and brightness with Cloud Intelligence . It enables Alexa and Google assistant control, Android control and iOS remote control (without HomeKit hub). Please reset K1 before setting up

Cloud Intelligence Account

Cloud Intelligence account: Sign up for a Cloud Intelligence account to control your Onvis Kameleon K1 light strip in Android,iOS(NON-HomeKit), Alexa and Google Assistant system.

Android system

Requires Android 10.0 or later.

Download the latest Cloud Intelligence app from Google Play store.
Tap the logo on the upper right to add K1. The app will search for the K1. (Make sure your Android phone joined a 2.4GHz Wi-Fi network. 5GHz Wi-Fi is NOT supported.)
Tap to the right of ‘Onvis K1 + Mac address’.
Use the Wi-Fi network in your android device to set up your K1 and input the Wi-Fi password. The Cloud Intelligence app will disconnect from the Wi-Fi and need to connect back to the SAME Wi-Fi network. Your K1 will join your target Wi-Fi network automatically.
(If you have more than 1 Wi-Fi network, the setup might fail if the Android device switches to other networks. Shut or forget other networks temporarily when necessary)
Name your device and assign it to a room in the Cloud Intelligence app.

iOS system remote control

Requires iOS 14.1 or later. This will enable remote control of K1 without HomeKit hub. The Cloud Intelligence app will be used.
Onvis Home app will support Cloud Intelligence account later.

Setup K1 to HomeKit in the Home app of iOS system.
Download the latest Cloud Intelligence app from App store. (Onvis Home app will support later).
Tap the logo on the upper right to add K1.
Tap to the right of ‘Onvis K1 + Mac address’ to add pairing. The K1 will be added automatically.
Name your K1 in the Cloud Intelligence app

Alexa control

Launch the Alexa app in iOS or Android system and log in to your Alexa account.
Search for the ‘Cloud Intelligence’ skill and enable this skill.
Input your Cloud Intelligence account and password to link account.
Search for the K1 under your Cloud Intelligence account. Name the K1 for Alexa voice control.

Google Home control

Launch the Google Home app in iOS or Android system and log in to your Google Home account.
Choose ‘works with Google’ and ‘link your smart home services’. Then search for the ‘Cloud Intelligence’, enable this service.
Input your Cloud Intelligence account and password to link account.
Refresh and wait for the Google Home app to search for the K1 under your Cloud Intelligence account. Name the K1 for Google Assistant voice control.

Restore Factory Settings

Press and hold the power button for about 10 seconds. After the light strip blinks full rainbow twice, the device will be restored to factory settings.

K1 Light Strip Overview

+ Button
Microphone
Power Button
Button

Power Button

Single press: On / Off
Double press: Switch between modes (Main→Paint→Music→Twinkle→Security→Preset Effects→Main…)
Triple press: Switch between Brightness / Hue control in Main mode
Long Press: Reset

+ / – Button

Main-Brightness: Adjust brightness
Main-Hue: Adjust color
Paint: Switch (Play Gallery→ first paint…→last paint→Play Gallery)
Music: Switch between music effects
Twinkle: Switch between twinkle styles
Preset Effects: Switch between preset effects

Specifications:

Brand: ONVIS
Model: K1

2 meters (6.6ft) version

Length of light strip: 2 meters (6.6ft) LED: 5050 RGB, total 60 pcs
Lighting Unit: 20 units
Adaptor Input: 110~240V AC, Max 1.2A, 50/60 Hz Adaptor Output: 12V 1A

5 meters (16.4ft) version

Length of light strip: 5 meters (16.4ft) LED: 5050 RGB, total 150 pcs
Lighting Unit: 50 units
Adaptor Input: 110~240V AC, Max 1.2A, 50/60 Hz Adaptor Output: 12V 2A
Beam Angle: 120°
Lifecycle: 20000 hours
Water Resistance: IP65 (light strip only, NOT the controller or adapter)
Working temperature: 14℉~113℉
Wi-Fi: 802.11 b/g/n, 2.4GHz ONLY (5GHz NOT supported)

Legal

Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Apple, Apple Watch, HomeKit, HomePod, iPad, iPad Air, and iPhone are trademarks of Apple Inc. registered in the U.S. and other countries. tvOS is a trademark of Apple Inc. The trademark “iPhone” is used with a license from Aiphone K.K.
Controlling this HomeKit-enabled accessory automatically and away from home requires a HomePod, Apple TV, or iPad set up as a home hub. It is recommended that you update to the latest software and operating system.
To control this HomeKit-enabled accessory, the latest version of iOS or iPadOS is recommended.

Warnings

Indoor use only. Keep controller away from water.
Do NOT cut the light strip
DO NOT use outside the electrical ratings. Use the original power supply in package.
Do NOT disassemble the light strip from the controller.
Do NOT over bend the light strip; Do not twist on an IC or LED bead
Do NOT turn on the light strip for over 5 minutes when it is tightly rolled, to avoid over heating.
Do NOT mount the controller on a greasy, or uneven surface.

General Instructions

This product contains inside small parts that might cause choking to children. Keep the product away from children under three years old. If the product comes in a plastic bag package, dispose of this bag correctly, and take actions to prevent children from playing with it as it poses risk of suffocation to children. This product may become warm with normal use. Please make sure the product is adequately ventilated and securely positioned, and do not place it near other sources of heat (e.g. direct sunlight, radiators, or similar). Unless otherwise stated, this product is for indoor use only, and must be maintained out of damp\humid conditions and other weather-related influences such as rain, snow and mist.

This product is not designed for use in any kind of machine, medical equipment or industrial applications. The product contains no user-serviceable or exchangeable parts. Do not attempt to repair the product. Do not dismantle the device nor the AC adapter as this may result in electrocution or other dangers that may cause injury. If the device plastic case, AC adapter, pins or terminals are damaged, stop using and dispose of this product properly. Contact for our after-saleservice if your product malfunctions or is damaged.

FCC compliance statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter.

Conformity Declarations

Shenzhen Champon Technology Co., Ltd here by declares that where applicable this product meets basic requirements and other relevant obligation as set forth in the following guidelines:
2014/35/EU low voltage Directive (replace 2006/95/EC)
2014/30/EU EMC Directive
2014/53/EU Radio Equipment Directive [RED] 2011/65/EU, (EU) 2015/863 RoHS 2 Directive
For a copy of the Conformity Declaration, visit: www.onvistech.com
This product is approved for use in European Union

Importer: Shenzhen ChampOn Technology Co., Ltd.
Address: 7A-1004, Phase 1, Vanke Cloud City, Xingke 1 Street, Xili, Nanshan, Shenzhen, China
Manufacturer: Shenzhen ChampOn Technology Co., Ltd.
Address: 7A-1004, Phase 1, Vanke Cloud City, Xingke 1 Street, Xili, Nanshan, Shenzhen, China

WEEE Directive Compliance

This symbol indicates that it is unlawful to dispose of this product together with other household waste. Please take it to a local recycling center for used equipment.

eVatmaster Consulting Gmbh

Bettinatr: 30 60325 Frankfurt am Main, Germany
contact@evatmaster.com

EVATOST CONSULTING LTD

Suite 11, First Floor, Moy Road Business Center, Taffs Well, Cardiff, Wales, CF15 7QR
contact@evatmaster.com

Icon