VIVO MOUNT-VW100T TV Wall Mount Instruction Manual
- June 13, 2024
- Vivo
Table of Contents
VIVO MOUNT-VW100T TV Wall Mount
SKU: MOUNT-VW100T
- Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.
- Instruction Manual: https://vivo-us.com/products/mount-vw100t.
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
- help@vivo-us.com.
- www.vivo-us.com. Chat live with an agent!
- 309-278-5303
WARNING!
Phillips Screwdriver If you do not understand these directions, or if you have
any doubts about the safety of the installation, please call a qualified
technician. Check carefully to make sure there are no missing or defective
parts. Improper installation may cause damage or serious injury. Do not use
this product for any purpose that is not explicitly specified in this manual.
Do not exceed weight capacity. We cannot be liable for damage or injury caused
by improper mounting, incorrect assembly or inappropriate use.
PACKAGE CONTENTS
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED.
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD
STUDS TO MOUNT. We include mounting for brick and concrete walls. If unsure,
please contact us at vivo-us.com, email at help@vivo-
us.com, or call us at
309-278-5303.
WARNING: CHOKING HAZARD
- SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
- DO NOT EXCEED WEIGHT CAPACITY.
- Failure to do so may result in serious injury.
TOOLS NEEDED
ASSEMBLY STEPS
STEP 1
Remove nuts from VESA Brackets (B) and replace with Knobs (C).
STEP 2
OPTION A: Wood Wall
Holding the Mount (A) up to wall at desired height, use a pencil to mark
mounting holes on wall where studs are located. Using a 5/32” bit, drill
approximately 2.2” into wall. Use Mounting Screws (W-A) and Washers (W-C) to
secure Mount (A) to the wall.
OPTION B: Concrete/Brick Wall
Holding the Mount (A) up to wall at desired height, use a pencil to mark
mounting holes on wall where studs are located Using a 3/8” bit, drill
approximately 2.4” into wall. Insert Anchors (W-B) into holes and secure Mount
(A) to wall using Mounting Screws (W-A) and Washers (W-C).
STEP 3
Mount VESA Brackets (B) to back of TV using appropriate Screws (M-A thru M-D),
M8 Washers (M-E), and a Phillips screwdriver. Spacers (M-F, M-G) are provided
if needed. Makes sure straps are towards the bottom of TV.
STEP 4
Attach TV to Mount (A) as shown below, making sure bottom of VESA Brackets (B)
attached securely.
Adjustments
- TV angle can be adjusted as desired.
- To remove, pull both straps down and lift TV off of Mount (A).
- Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
- LAST UPDATED: 02/10/2023 REV2
CONTACT
- Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times.
- If any parts are received damaged or defective, please contact us.
- We are happy to replace parts to ensure you have a fully functioning product.
- 309-278-5303.AVG. RESOLUTION TIME (within office hrs): 5M 4S
- www.vivo-us.com.Chat live with an agent!AVG. RESOLUTION TIME (within office hrs): < 15 M
- help@vivo-us.com.
- AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com.
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Wall Mount for 60” to 100” TVs – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>