Shenzhen Cigna Safety Technology CS118 Wireless Household Anti-Theft Alarm System User Manual
- June 5, 2024
- Shenzhen Cigna Safety Technology
Table of Contents
Shenzhen Cigna Safety Technology CS118 Wireless Household Anti-Theft
Alarm System
Introduction to Appearance
Front view of the host
Back view of the host
Top of the host
The bottom of host
Description of the main interface
Before Use
The current system password is 123456.
Startup
- Power on: inset USB power supply
- Start: hold down the power button
Set language main interface> menu interface> select to enter language
Press to select language. Press to confirm.
The connection between the Host and Wireless Detectors
Add new wireless detectors Main interface> menu interface> select to enter accessories.
Change the attribute of the wireless detector
Select [change] and press [#]to confirm. Press to select the attribute to be changed.to confirm.
Delete wireless detectors
Select and press to confirm. Press and confirm the deletion.
The connection between the Host and Wireless Siren
Wireless Siren
- Pairing
- Press down the wireless acousto-optic alarm pairing key [TEST] and release it after the acousto-optic flashes twice. The signal flashes quickly to enter the pairing state.
- Press SOS key of the host. After the pairing is successful, the wireless acousto-optic signal rings long to prompt, indicating a successful pairing.
- Verification: operate arming/disarming/SOS key of the host, the sound is given out for prompt after the alarm signal is received.
Tuya Smart
Download Tuya Smart
Scan the two-dimensional code and download “Tuya Smart or (Smart Life)”. IOS: please download the “Tuya Smart or (Smart Life)” at the apple application market. Android: please download the “Tuya Smart or (Smart Life)” at the application market.
Register/login Tuya Smart
Networking and connection between Tuya Smart and the host. Main interface> menu interface> select the network. to enter The first type: the operation step for smart connection (Rapid flashing) (with the operation of Android mobile phone as example)
Go to the networking interface of the host and select smart connection.
Scheme click on the top left corner to scan the hub code. Scheme Go to the “Security & Sensors” and choose “Alarm (Wi-Fi)”, click enter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>