TAKSTAR DA10 Professional Speech Microphone User Manual

June 6, 2024
TAKSTAR

TAKSTAR DA10 Professional Speech Microphone

Product

Dear Customer,
Thank you for purchasing TAKSTAR DA10 speech microphone. Please read the user manual carefully before operation and keep it for reference in future. If you have any questions or suggestions, please contact our local dealer.

Features

  • Combining microphone, power amplifier and speaker together, suitable for speech, publicity, karaoke

  • Rear earth material speaker, light weight, excellent sound, high volume, peak power 8W

  • One button to switch between MC mode and KTV mode, easy operation

  • Wireless playing function without the trouble of cable connection, more convenient to play music

  • Volume adjusting function to adjust the volume based on the venue

  • Built-in DSP chip with the feedback rejecting function to reject feedback effectively

  • Ultra-long standby, turning off automatically after no signal input for 15 minutes to save the power consumption
    High capacity Lithium battery for energy saving and environmental protection, approximately 8h operation time

  • Compact design, comfortable to hold, suitable for reinforcement and karaoke for a long time

Application

Speech, publicity, karaoke, etc.

Product content

  • DA 10 speech microphone………………………………………1 pc
  • Windscreen………………………………………………………1pc
  • Type-C charging cable…………………………………………1 pc
  • User manual………………………………………………………1 pc

Specification

  • Frequency Response: 100Hz-15kHz
  • Peak Power: 8W
  • Speaker Impedance:
  • THD: THD≤5% 1KHz@4R,4W
  • S/N Ratio: 66dB (A-Weighted)@1W 4Ω (speech mode)
  • Bluetooth Version: 5.0
  • Reverb: Reverb
  • Operating Voltage: 3.4V-4.2V
  • Battery Type: Li-ion battery (18650)
  • Battery Capacity: 3.7V/2000mAh
  • Charging: DC5V 1.5A
  • Charging Time: apprpx.3h
  • Operation Time: approx.8h (speech)
  • Net Weight: approx. 220g
  • Dimension: Φ64mm235mm (DiaH)

Cartridge Specification

  • Cartridge: back electret
  • Polar Pattern: unidirectional
  • Frequency Response: 150Hz-16KHz
  • Sensitivity: – 47.5±1.5dB(0dB=1V/Pa,at 1KHz)
  • Note: The data is tested by Takstar Laboratory and Takstar has the final interpretation right!

Function

TAKSTAR-DA10-Professional-Speech-Microphone-fig1

  1. Power button: Keep pressing it for 2 seconds to turn on or off the amplifier. If it is not used for 15 minutes, it will automatically power off.
  2. “M” button: Click it repeatedly to switch between the KTV mode and the SPEECH mode. When it is switched to the KTV mode, the wireless connection is turned on at the same time, and when it is switched to the SPEECH mode, the wireless connection is turned off.
  3. Indicator light: If it keeps lighting up green during operation, this means sufficient power supply. If the power can last for less than 1h, it keeps lighting up red. It flashes red when charged. If it keeps lighting up green, this means it is fully charged.
  4. “+” button: Click it to increase the volume of the amplifier. A total of 3 levels of volume can be chosen.
  5. “-” button: Click it to decrease the volume of the amplifier. It can only be minimized to about 60% of the total volume. There is no mute function.
  6. Cartridge: When speaking, the mouth should be as close as possible to the pickup, generally 3-5 cm. Do not cover the cartridge with your hands; otherwise it will easily produce feedback.
  7. Charging interface: Connect to the Type-C charging cable. Please use a charging head with a specification of 5V 1.5A and 3C certification to charge the amplifier.
  8. Speaker: Do not put the speaker too close to people’s ears to avoid hearing damaging. Please try to keep the speaker clean.
    Note: When the product is used for the first time, it is recommended to fully charge it first; when it is fully charged, please stop charging the battery to avoid overcharge; if it is not used for a long time, it needs to be charged once every six months to avoid over discharge of the battery, which will affect the battery performance.TAKSTAR-DA10-Professional-Speech-
Microphone-fig2

Wireless pairing method

When the product is used for the first time, it needs to be paired with a mobile phone or a wireless playing device. The steps are as follows:

  1. In the power-on state, click the mode button, and the amplifier enters the searching and pairing state of wireless playing;
  2. Enter the “Settings” menu of the mobile phone, find the option of wireless function, and turn on the wireless playing function of the mobile phone. After searching for “TAKSTAR DA10”, click “TAKSTAR DA10” to connect. When the amplifier can be played wirelessly, it means the connection is successful.
  3. The next time you switch to the KTV mode, if you have already made a wireless connection, it will automatically reconnect. In the case of a successful wireless connection, it will be disconnected when switching to the SPEECH mode.

Caution

In order to avoid possible personal injury or property damage caused by electric shock, high temperature, fire, radiation, explosion, mechanical hazards and improper use, please read and observe the following items carefully before using the product.

  1. Please do not put the speaker close to people’s ears to avoid hearing damage.
  2. If there is any abnormality (such as smoke, odor, etc.) during use, please turn off the power switch and unplug the power plug immediately, and then send the product to the dealer for maintenance.
  3. The product and accessories should be placed indoors in a dry and ventilated place. Do not store them in a humid and dusty environment for a long time. Avoid getting close to fire, rain, water, excessive collision, throwing, vibrating the machine and covering the ventilation holes during use, so as not to damage its function.
  4. When using the product, you must abide by the relevant safety regulations. Please do not use the product in the occasions that are clearly prohibited by laws and regulations to avoid accidents.
  5. Please do not disassemble, refit or repair the product by yourself to prevent personal injury. If you have any questions or service needs, please contact our local dealer for follow-up.

Scan for more product information Guangdong Takstar Electronic Co., Ltd. Address: No. 2 Fu Kang Yi Rd., Longxi Boluo Huizhou, Guangdong 516121 China

Tel: 86 752 6383644
Fax: 86 752 6383952
Email: sales@takstar.com
Website: www.takstar.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals