TAKSTAR WPM-400 Wireless In-Ear Monitoring Earphones User Manual

TAKSTAR WPM-400 Wireless In-Ear Monitoring Earphones

Preface Dear Customer,
Thank you for purchasing Ta kstarWPM-400 Wireless In-Ear Monitoring Earphones. In order to better understand and use the product, please read this manual carefully. If you have any questions or suggestions, please contact our local dealer.

Features

• Multi-functional wireless in-ear monitoring earphones, suitable for entertainment stream, live stream e-commerce and music appreciation.
• One-key switch between Monitoring and TWS modes to suit for various applications.
• 2.4GHz wireless transmission up to a bout 10m, quick pairing, auto reconnecting.
• Professional I-grade monitoring, low latency without audio delay for smoother streaming and interaction.
• In-ear design, compact and comfortable to wear, carry music with you as you move around.
• Charging case and transmitter integrated in one, super-portable, supports wired or wireless charging.
• Transmitter uses supplied Type-C to 03.5mm cable for easy connection with audio device like audio interface or mixer.
• Built-in Li-ion battery lasts up to 6hrs continuously.

Package Contents

Charging Case (Transmitter) ……………………………………………………………….. 1 pc
Wireless Earphones ………………………………………………………………………… 2 pcs
Charging Cable ………………………………………………………………………………… 1 pc
Audio Cable …………………………………………………………………………………….. 1 pc
Ear Tips (S/M/L) ……………………………………………………………………………….. 3 prs
UserManual …………………………………………………………………………………….. lpc

Applications
Suitable for entertainment stream, livest ream e-commerce, music appreciation.

Specifications

Charging Case Specifications

• Battery Capacity: 700mAh
• Charging Time (Wired): approx. 2hrs
• Charging Time (Wireless): approx. 6hrs
• Battery Life: 4full charges (both earphones)
• Case Dimensions: 65.6°54 “32mm
• Case Weight: approx. 57g
• Operating Temperature: -l0°C~50°C
• Storage Temperature: l0°C~50°C
• Input Voltage: 5V
• Charge Current: 445mA (maximum)
• Temperature Control: auto disconnect charging at around 55°C

Earphones Specifications

• Battery Capacity: 70mAh

• Frequency Response: 20Hz-20KHz

• Sensitivity: 115d B

• Earphone Dimensions: 35_75•22.23•20.24mm

• Single Earphone Weight: approx. 7g

• Transmission Frequency: 2.4GHz

• Earphones Charging Time: approx. 70min

• Charging Voltage/Current: DC 5V/700mAh

• Operating Temperature: -l0°C~S0°C

• Storage Temperature: l0°C~60°C

• Low Latency Distance: ;;s,7m

• TWS Mode Battery Life:
  Phone Call: approx. 5hrs for both earphones
  Continuous Music Playback: approx. 7hrs (at 80% volume)
  Standby Battery Life: approx.120hrs

• Monitoring Mode Battery Life:
  Continuous Music Playback with connected audio interface: approx. 6hrs (at 80% volume)
  Standby Battery Life: approx. 7hrs

Note: The above data is measured by Takstar laboratory, and Takstar has the final interpretation right!

Function Descriptions

Charging Case (Transmitter):

1. Battery LED: shows battery level.
2. Work Mode LED: shows TWS pairing status or Monitoring status.
3. Mode Button: double-click to switch between TWS and Monitoring modes.
4. Type-C Interface: for charging the case via Type-C charging cable, or for connecting audio device via supplied audio adapter cable.

Earphones (Receivers):
CD Touch Area: for controlling music playback, answering/rejecting/ending calls. 0 LED Dot: lights upfor3s when powered on, then goes off into pairing status; flashes when earphone battery is low; lights up for3s on the right earphone then goes off upon auto power-off when placed into charging case.

Operation Instructions

Power Detection:

1. 1. The normal power level for both earphones and the case: left LED turns green for3s when case lid opens.

2. Low power level for either earphones or the case: left LED turns red for3s when case lid opens.
   Note: When case lid is closed, click the button on the case to check power level.

Place-back Detection (in charging case):

1. 1. Left earphone placed: left LED lights up green for ls then goes off.

2. Right earphone placed: left LED lights up green for ls then goes off.
3. Both earphones placed: left LED shows green twice, each for ls then goes off.

Live Stream Monitoring (as shown in the diagram):
Transmitter/charging case

1. 1. Use the supplied audio adapter cable, connectthe device with audio interface as shown in the above figure.

2. The first time you open the case lid, the device shows power level then enters Monitoring mode by default. Open thechargingcase, the right LED on the case turns blue permanently, take out the earphones to start monitoring.
3. Mode Memory function: retains previously used mode before last power-off.

Switch TWS/Monitoring Mode:

1. 1. Under Monitoring mode, place the earphones (either or both) into the charging case, then double-click the case button to enterTWS mode, indicated by the right LED flashing blue.

2. UnderTWS mode, place the earphones (either or both) into the charging case, then double-click the case button to enter Monitoring mode, indicated by the right LED staying blue.

SmartTouch Control:

1. Earphone Call Notification: same as your phone’s ringtone.
2. Answer/End Call: tap the touch area on either earphone.
3. Reject Call: touch and hold the touch area on either earphone for l.Ss.
4. Play/Pause: tap the touch area on either earphone.
5. Previous Tack: double-tap the touch area on the left earphone.
6. Next Track: double-tap the touch area on the right earphone.
7. When using only one earphone, double-tap on the in-use earphone switches to Next Song only.
8. Voice Assistant: touch and hold the touch area on either earphone for 2s until you hear”Du”.
9. Stereo/Single Mode Switch: use both or either earphone freely. The earphones auto reconnect and pair in seconds.
10. Change Na me: find the wireless device settings in your phone, tap on the device name, proceed to edit and enter a new name to rename the device.
11. Power-off: touch and hold the touch area for 6s on the left/right earphone until you hear shutdown notification “Du”.
12. The earphones auto power off when placed into the charging case and the lid is closed (provided the charging case battery is not out).
13. The earphones auto power off when disconnected for more than 3 minutes.

TWS Connection

1. The earphones start in Monitoring mode by factory default. To switch to TWS mode, place the earphones back in the charging case and double-click the case button, the right LED on the case will flash to indicate TWS mode.
2. Turn on your phone, go to settings, enable wireless connection and search for a device named “TAKSTAR WPM-400”, tap it to connect.
   Note: When connected to iPhones via Bluetooth, the phone status barwill show earphones battery level aside the Bluetooth icon.

PromptTone Descriptions:

• Power-on:/
• POWER -off:” Du~” (long tone)
• Stereo pairing success: “Du”
• Connected: “Du?” (rising tone)
• Disconnected: “Du’s” (falling tone)
• Low battery: “Du Du”

Clear Pairing:
Open the charging case lid, press and hold the case button forSs until the LED dots on both earphones light up for2s to clear the pairing history.

Charge the Charging Case **

**

Wireless Charging:

Note: To ensure normal functionality, please use a wireless charging device that meets the Qi standard for charging.

Wired Charging:

Note: To ensure norm a I functionality, please use the supplied charging cable to connect the case with power supply for charging.

Charging Indicator on Charging Case

Power adapter disconnected

| Chargeboth earphones 1n

charging case

| Left LED flickers red, then turns off when fully charged

Chargesingleearphone in charging case

| UnderTWS mode (right LED flickers blue), left LED flickersred, thenturns offwhen fully charged
Under Monitoring mode (right LED stays blue), left LED flickers red, thenturns offwhen fully charged

Power adapter connected

| Chargethe case only (w/o earphones)| Left LED flickers red, then turns solid greenwhen

fully charged

Charge both earphones in charging case| Left LED flickers red, thenturnssolid greenwhen fully charged

Chargesingleearphone in

charging case

| UnderTWS mode (right LED flickers blue), left LED

flickers red, thenturns solid greenwhen fully charged

Under Monitoring mode (right LED stays blue), left LED flickers red, thenturns solid greenwhen fully charged

Safety Instructions

To avoid electric shock, overheat, fire, radiation, explosion, mechan ica I risk and injury or property loss due to improper use, please read and observe the following items before use:

1. Please check if the power of the connected equipment matches with that of this product before operation. Adjust thevolu me to proper level du ring operation. Do not operate at over-power or high-volume level for an extended time to avoid product malfunction or hearing impairment.
2. If there is any abnormality during use (e.g., smoke, strange odor), please kill the power switch and unplug from the power source, then send the product to the local dealer for repair.
3. Keep this product and its accessories in a dry and ventilated area. Do not store in a hum id or dusty area for an extended time. Keep away from fire, rain, liquid intrusion, bumping, throwing, vibrating,or blocking any ventilation openings, to prevent malfunction.
4. Please a bide by safety rules du ring operation. Do not use the product in places prohibited by laws or regulations to avoid accidents.
5. Do not disassemble or repair the product by yourself to avoid injury. lfyou have any questions or require any services, please contact our loca I dealer.

References

• 得胜官网-广东得胜电子有限公司

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>