TAKSTAR V4 Wireless Video Microphone User Manual

: June 6, 2024
: TAKSTAR

TAKSTAR V4 Wireless Video Microphone

Foreword

Dear user:
Thank you for choosing our V4 wireless camera microphone. In order to better understand the use of this product, it is recommended that you read this manual carefully before use.If you have any questions or any valuable suggestions, please call our service hotline 400 6828 333 or scan the Wechat QR code to followour official account of TAKSTAR to contact us.

Features

Original lightning connector, no more worries about IOS ecosystem, and safe to use.
Three-in-one universal receiver, lavalier design, compact and convenient. Compatible with cameras and mobile phones and others.
2.4G wireless transmission technology, the stable transmission distance can be up to 120M.
Real-time monitoring, free switching of three volume levels.
Three noise reduction modes can be switched freely, to meet accurate pickup in any complex environment.
Support TF card local audio storage, no more worry about file loss.
The microphone can be used as a recording pen alone, and the recording can be saved synchronously anytime and anywhere in any environment.
The microphone and receiver with 3.5 mm cable which is used for the camera can last 12 hours of continuous interviews.
Equipped with a charging case, the transmitter and receiver are more convenient to store and charge; interviews.
The charging case has a large battery of 1000mAh that can be recharged, which is the first choice for travel and making a Live. Live, Vlog, Video-shooting, interviews and other

Applications

Live, Vlog, Video-shooting, Interview, and others.

Packing List

Charging case(one mic and one receiver) 1PCS
Microphone transmitter 1PCS
3 in 1 Receiver 1PCS
Audio cable 1PCS
Charging cable 1PCS
Wind-proof 1PCS
Earphone 1PCS
User manual 1PCS

Specifications

Charging case

Input voltage: DC 4.8V~5.4V
Charging time: 90 mins
Weight: about 85.6g
Battery capacity: 1000 mAh
Recharge times: recharge 3 times for microphone and receiver
Charging case size: 47.513.477.95mm

Microphone specification

Frequency: 2.4GHz
Latency: 25 ms
Frequency response range: 20-20KHz
DC: 4.8~5.4V
Sensitivity: -26 dBFS
Microphone size: 47.115.0415.61mm
Battery: 230mAh
Working time: 12 hrs
Charging time: about 80 mins
Weight: about 14g
S/N Ratio: 64 dB

Receiver specification

Frequency: 2.4GHz
Latency: 25 ms
Frequency response range: 20-20KHz
DC: 4.8~5.4V
Microphone size: 47.513.477.95mm
Battery: 230mAh
Working time: 12 hrs
Charging time: about 80 mins
Weight: about 18.7g

Note: The above data is obtained from the TAKSATR laboratory which has the final interpretation right!

Functions

Charging case indicator light
Type-C charging port
Lightning receiver
3.5 mm adapter cable port
Type-C receiver
Power /reset button
Volume/noise key
Indicator light on the receiver
3.5mm monitoring port
TF memory card slot
Mute key
Indicator light on the microphone

Microphone transmitter functions

Receiver functions

Charging case specification

Connection instruction

After taking out the device, the indicator lights of the microphones on the receiver and transmitter are always green, it is paired successfully. （See as below picture）

Mobile phone connection instruction

Plug the Lightning receiver/Type-C receiver into the Lightning port/Type-C port of the mobile phone, and the green light of the receiver is always on, and the microphone can be used to pick up sound.

Camera connection instructions

Plug the 3.5mm cable into the receiver and the 3.5mm hole of the camera respectively, the green light of the receiver is always on, and the microphone can be used to pick up sound.

Windows Notebook Operation

Turn on the receiver and connect the TPYE-C port to the TPYE-C jack of the computer, or insert the 3.5 adapter cable to the audio input jack, click the “Speaker” icon at the bottom right of the computer, and then open the sound settings, “Sound” setting option and then click the bottom of the page to select “Voice Input” option, select the corresponding “Microphone” option to confirm.

Desktop Windows operation

Turn on the receiver, plug in the 3.5mm adapter cable to the audio input port of the host computer, click the “Speaker” icon at the bottom right of the computer, and then open the sound settings, the “Sound” setting option, and then click the “Sound Input” option at the bottom of the page, and select the corresponding “Microphone” option to confirm.

MacBook operation

Turn on the receiver and connect the TPYE-C port to the TPYE-C socket of the MacBook. On the MacBook, select the “Settings” option, then click the “Sound” , then select the
“Sound output” option, click to select “Speaker”, and then confirm; then select the “Sound input” option, click to select “Microphone -Wireless microphone” ， Click Confirm to use.

Turn on OTG (only for the Android system)

Take OPPO A72 model as an example

Instructions for installing the receiver to the camera

Before installing to the camera, use the receiver’s back clip to clip on the camera shoe and then fix.

Wool cover installation instruction

Align the plastic buckle of the wool cover with the groove of the transmitter, insert it and then rotate 90° clockwise to fix it.

Label Meanings

According to the test results obtained based on RL2004/108/EG (Electro magnetic Compatibility Directive) and RL2006/95/EG (Low Voltage Directive), this product complies with the limits specified in the European Community EMC (Electromagnetic Compatibility) Directive, an integration of relevant laws from its member states.

Federal Communications Commission

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. This device complies with Part
15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

This symbol indicates that,according to WEEE (Waste of Electrical and Electronic Equipment)Directive(2012/19/EU)and national laws, this type of waste should not be discarded along with your household waste,as it contains potentially hazardous substances that may pose a negative impact on the environment and human health. It should be handed over to an authorized WEEE collection facility for recovery and recycle. Herewith you will be helping effective utilization of natural resources.For more information on disposal of WEEE products, please contact your local municipality, waste management bureau or household waste disposal service.

Safety Instructions

To avoid electric shock, overheating, fire, radiation, explosion, mechanical risk, and injury or property loss due to improper use, please read and observe the following items before use:

Please check if the power of the connected equipment matches that of this product before operation. Adjust the volume to the proper level during operation. Do not operate at over-power or high-volume level for an extended time to avoid product malfunction or hearing impairment.
If there is any abnormality during use (e.g., smoke, strange odor), please kill the power switch and unplug from the power source, then send the product to the local dealer for repair.
Keep this product and its accessories in a dry and ventilated area. Do not store in a humid or dusty area for an extended time. Keep away from fire, rain, liquid intrusion, bumping, throwing, vibrating, or blocking any ventilation openings, to prevent malfunction.
Please abide by safety rules during operation. Do not use the product in places prohibited by laws or regulations to avoid accidents.
Do not disassemble or repair the product by yourself to avoid injury. If you have any questions or require any services, please contact our local dealer.

About This Manual

This manual contains up-to-date technical specifications as of printing. However specifications contained herein may not conform to your particular product since Takstar is constantly improving its products.For the latest version/more information please visit our website: https://www.takstar.com/. Specifications, devices or accessories available may vary from region to region.If you have any questions,please contact our local dealer.