Crane A15B Wood Imitation Bedside Table Lamp with Wireless Charger and Wireless Speaker User Manual
- June 6, 2024
- Crane
Table of Contents
Crane A15B Wood Imitation Bedside Table Lamp with Wireless Charger and Wireless Speaker
Product Usage
Table Lamp Function
Connect the supplied external AC adapter with the charging port DC12V on the
behind of the device, then short touch the handles of the product to turn
on/off the lamp.Press and hold is invalid. The handles of the product as
below:
Wireless Speaker Function
-
Wireless On/Off Key: Press and hold the power button to turn on /off the speaker, short press is invalid.
-
Play/Pause Key: Short press this button to Playl Pause; Press and hold is invalid.Previous/Decrease Volume: Short press to decrease volume; Press and hold switch
to previous song. NexVlncrease volume: Short press to increase volume; Press and hold switch to next song. There is a notification tone when reaching the maximum volume. -
+ Press and hold the Previous/Decrease Volume & NexVlncrease volume together at the same time to disconnect the Bluetooth connection.
Important Thank you for purchasing our products. To guarantee your rights.please fill in this form properly.Thank you
Wireless Charger Function
Connect the supplied external AC adapter with the charging port DC12V on the
behind of the device, then put the phone that with wireless charging function
to the wireless charging reception area for charging. The wireless charging
reception area is shown below:
Warranty Card
Applicable for
- Since buying date.the user enjoys one year free repair services under normal use.After one year.will be charged according to each component part cost.
- In case change component part.will be charged according to our company’s component part cost list.
- The following situations without free repair services in warranty period
- Damage caused by natural earthquake.rat disaster.and unnormal use.
- Damage caused in transportation,fall,and unproper storage.
- Consumable component.such as spare parts,batteries,light bulbs.etc.
- Warranty information records is not complete.no purchase date, no buying shop seal.etc.
- Featured using environment.such as humidity.sulfur area, high salty and on board,etc,easy corrosion area.
- Using not according to the instructions.
- Special offer.
- When return to factory for repair.the user should make sure the product packed properly to avoid any damage during transportation.
- Factory not responsible for the damages caused by the users themselves unproper disassemble.
Safety instructions
Thank you for purchasing the A 15B Wireless charger & Bluetooth speaker. Here enclosing with the detailed instructions for your best reference to experience our product easily! This user manual is designed to familiarize you with all the features of this device. Please take time to read this user manual carefully, if the translation is having faults or imperfect or there are some typographical error, hope to get your understanding. In order to use this product correctly and ensuring a good performance, please read the safety instructions as below carefully before using.
- Please do not impact the main device seriously
- . Please do not contact benzene, diluter and other chemicals
- Please do not use anything to block the product’s sensor head, to avoid poor reception.
- Please do not repair or disassemble it yourself
- Waste packaging, batteries, and electronics products, please classify and deal with it properly.
Technical Paramaters
- Bluetooth Speaker “11/ireless Charger
- Version: V4.2
- Frequency Response: 40Hz-12KHz
- Transmission Distance: Wireless Charging Power:5W
- Output Power: 3.5W +3.5W
- Wireless Name: A15B
- Horn Parameters: 41lmm 4 5Wx2
- SNR:80dB
- Lamp Power:4W
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause hanmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the use(s authority to operate the
equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be detenmined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.