ACCUTIME iTimeMax Smart Watch User Manual
- May 15, 2024
- Accutime
Table of Contents
USER MANUAL
Smart Watch
Downloading the App
Scan the following QR code, download and install the APP called Da Fit
http://plus.crrepa.com/app-download/dafit
Charging and Active
Charging the device to active before the first time using;
To charge your device, plug the charging cable into the adapter or USB port on
your computer.
Pairing
The MAC address on the watch “Setting”- “About“page could help you identify your device on the scanning list.
Important; After you have connected in the Da Fit App of your smartwatch, Please note that in order to be able to receive and display all the messages from the phone you must accept the permissions.
Use the Touch Screen
Smart Watch Features
Phone
After connecting the smart watch to the APP, you can use the watch to dial and
control the phone to make calls and answer calls.
You can also view the call history from the watch and add frequent contacts.
You must keep establishing the connection between the watch and the phone when
using the phone call function. Activity
Smant watch automatically tracks the steps taken on the screen.
NOTE: Your movement stats reset to zero at midnight. Steep
If you keep wearing smart watch in your sleep . it can provide the hours slept
and quality of sleep stats on both the screen and the APP.
NOTE: Sleep stats reset to zero at 8:00 pm. Heart Rate Test
The smart watch could record your heart rate all day. You also could tap on
the page to start measuring heart rate Blood Pressure Test
Tap on the blood pressure page to start measuring your blood pressure.
On the blood pressure page, It can show the blood pressure measured data of
the last times. SPO2 Test
Tap the SpO2 page to start measuring your SpO2.
On the SpO2 page, It can show the SpO2 measured data of the last times.
Weather
tt could show the weather forecast , location , sunrise and sunset.
Weather info is synced after connected with the APP, it will not be updated
after a long disconnected. Exercise
Click on the icon on the menu to start a new training session.
Sports details including time,steps,distance,calories,heart rate and current
time.
Slide to the left to pause or end exercise.
Message Reminder
The device can sync incoming notifications from Twitter, Facebook, Whatsapp,
Instagram etc.
Recently 8 messages can be stored.
Note: You can switch on/off the incoming notification in the APP. Remote
Camera
After connecting the device,you can remote control the camera on your phone.
Music Control
After connecting the device,you can remote control the music player stop/play,
last song, next song and volume + or – Stopwatch
Tap the start button on stopwatch page to start timing, and tap the stop
button to stop timing. Alarm
Set up the alarm on the APP or watch, the device will vibrate to remind on
time. Remind To Drink
The smart watch will remind you “Time to Drink Some Water” at the planned
drinking time.
Note: You can set the feature in APP.
Remind To Move
The device will vibrate to remind you to make a relax after 1 hour sitting.
Note: You can switch on/off the feature in the APP. E-Cards
You can upload the QR code of the social app (like Wechat,Whatsapp ect.) from
mobile phone album,and then it will be displayed on the smart watch.
Settings
Include display, vibrate, do not disturb, low power mode, reset, systern,
about.
Getting To Know Your Device
-
Using in Wet Conditions
Your device is water-resistant, which means it is rain-proof and splash-proof and can stand up to even the sweatiest workout.
NOTE: Do not swim with your smart watch. We also don’t recommend showering with your watch; Thought the water
won’t hurt the device, wearing it 24/7 does not give your skin a chance to breathe. Whenever you get your bracelet wet, dry it thoroughly before putting it back on. -
Using Quick View
With Quick View you can check the time or the message form your phone on your watch without taping. Just turn your wrist towards you and the screen will appear for a few seconds.
General Info & Specifications
-
Environmental Conditions
Operating temperature: 14°F to 122°F (-10 to SOC)
Non-operating temperature: -4F to 140°F {-20T to 60T) -
Disposal and Recycling
Please kindly be aware that it is the consumer’s responsibility to property dispose and recycle Smart Bracelet and accompanying components. Do not dispose of Smart Bracelet with common household waste, the Smart Bracelet unit is considered electronic waste and should be disposed of at your local electronic equipment collection facility.
For more information, please contact your local electronic equipment waste management authority or the retailer where you bought the product.
FCC Compliance Statement
This device complies with Part 1S of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE1: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consuit the dealer or an experienced radio/TV technician for help.
NOTE2: Any changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Product Name: Smart Watch
Product Model: iTime Max
Manufacturer: Accutime Watch Corporation 1001 Avenue of the Americas 6″ Floor
New York, NY, 10018
[email protected]
www.accutimewatch.com
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
One-Year Watch Service Limited Warranty
Do NOT return the watch to the store.
This watch is warranted for a period of one (1) year from the date of purchase
to be free from origina! defects in materials and workmanship under normal
use. In the event of any defect or failure, the manufacturer will replace the
watch with an exact or similar valued model without charge at our option.
This warranty does not cover wear or consequential damage to the watch case or
strap.
This warranty does not cover water damage, improper use, negligence, or
unauthorized service or repairs and is considered void for other factors not
due to defects in materials or workmanship.
U. S. residents must include a shipping and handling fee of $10.00 in the form
of a check or money order payable to Accutime Watch Corp. Additional fees may
apply. Send your watch for warranty service to:
Accutime Watch Corp.
ATTN: Service Dept.
1001 Avenue of the Americas,
6th Floor New York, NY 10018